Nds surgical imaging Dome GX2MP User manual

Medical Visualization Technologies
Dome GX2MP
Superb Visual Quality.
DICOM calibrated.
August 2008
The Dome GX2MP is a high-quality color display intended for use in a clinical environment. The
GX2MP offers a 1200 x 1600 resolution, superior visual quality, and superb performance at an
incredibly fast 16ms response time and comes DICOM calibrated with Dome CXtra software.
With Dome CXtra, Dome GX2MP users also receive manual DICOM calibration with an external
photometer, test patterns, reporting, backlight saver and enterprise management functions. In
addition the GX2MP comes complete with graphics hardware and the necessary cables, every-
thing the end user will need for an easy installation.
>Outstanding 1000:1 Contrast Ratio
>Enterprise Management and DICOM
Conformance with Dome CXtra
>Height adjustable stand
helps reduce eye and neck
strain allowing each user
to adjust the height of this
LCD monitor to their exact
comfort level
>Dome CXtra™ for DICOM
Calibration
FEATURES:
>High Performance 20.1"
2 megapixel LCD panel
>Superior visual quality with
.255mm pixel pitch
>16 ms response time
>Outstanding 1000:1
contrast ratio
>300 cd/m2luminance

www.ndssi.com/pacs
SPECIFICATIONS:
LCD DISPLAY
Technology TFT AMLCD MVA, 3 subpixels per pixel
Screen diagonal 20.1-inch (510.5mm)
Display Resolution 1600x1200 landscape, 1200x1600 portrait
Pixel Pitch .255 mm
Viewing angle (CR 10:1) +/– 85° (170°) horizontal
+/– 85° (170°) vertical
Optical Characteristics
Response Time 16 ms typical
Brightness Typical: 300 cd/m2Default Calibrated: 200 cd/m2
Contrast ratio 1000:1 – typical
Palette 16.7 million – programmable gamma
DICOM Calibration DICOM calibration validation via external photometer and Dome CXtra
Refresh Rate
Panel Interface
Digital Video Input DVI Connector
Analog Video Input VGA Connector
Digital Communication and ID n/a
USB interface n/a
Video Input Formats
Landscape Orientation 1600 x 1200 24 bit color per pixel
Portrait Orientation 1200 x 1600 24 bit color per pixel
VGA/XGA 640 x 480 – 1024 x 768
Calibration
Technique Manual calibration with external photometer
Test Standards
Calibration Type DICOM Grayscale
Imaging/Graphics Controller
Compatible Controller Support AX4, NX285x16, NX285x1
Physical Characteristics
Display Size without stand 13.8" x 17.5" x 2.8" (345mm x 445mm x 72mm)
Weight without stand Less than 23lbs
Mounting Options 100 VESA mounting standard. Desktop stand with height, pivot, swivel and
tilt adjustment
Power Requirements
Power input 110 to 220 VAC, 50-60Hz Universal Auto Switching. 50 Watts typical, 1Watt standby
Environmental
Operating Temperature Range 0 to 40 degrees C
Certifications
Safety & Emission Complies with CCC, CE, cUL, FCC Class B, MIC, TÜV GS,VCCI
Service & Support
Warranty 3-year standard warranty (w/48 hr. advanced exchange)
(Specifications may vary based on specific customized solution requirements.)
North American Corporate Offices
5750 Hellyer Avenue
San Jose, CA 95138
USA
Tel: [phone]
Email: [email protected]
U.S. East Coast Office
Dome Products
400 Fifth Avenue
Waltham, MA 02451
Phone: -781-895-1155
Fax: [phone]
Email: [email protected]
European Offices
Nijverheidscentrum 28
2761 JP Zevenhuizen (ZH)
The Netherlands
Tel: [phone]
Email: [email protected]
Asia Pacific Offices
1st Fl., RISE Building,
5-13, Asakusabashi 5-Chome,
Taito-Ku, Tokyo, Japan, 111-0053
Tel: [phone]
Email: [email protected]
© 2008, NDS Surgical Imaging.
Products may not be available in
all markets and are subject to the
regulatory or medical practices that
govern individual markets. Always
refer to the package insert, product
label and/or user instructions before
using any NDSsi product. Contact
your NDSsi representative for more
information. Products referenced
with ™ designation are trademarks
of NDSsi. Products referenced with ®
designation are registered trade-
marks of NDSsi.