NEC LCD175VXM - MultiSync - 17" LCD Monitor User manual

To learn about other special offers register online at www.necdisplay.com.
Pour en savoir plus long sur d’autres offres spéciales, inscrives-vous en ligne à www.necdisplay.com.
Para informarse sobre otras ofertas especiales, regístrese en línea en www.necdisplay.com.
User’s Manual / Manuel de l’utilisateur /Manual del Usuario
MultiSync® LCD175VX+™/LCD195VX+™
MultiSync® LCD175VXM+™

2
Contents
* Remember to save your original box and packing material to transport or ship the monitor.
Your new NEC MultiSync LCD monitor box* should contain the following:
• MultiSync LCD monitor
• Power Cord
• User’s Manual
• Video Signal Cable
• Audio Cable (LCD175VXM+ only)
• Base Stand
• Cable Holder
MultiSync LCD Monitor
User’s Manual
Video Signal Cable
Power Cord
Audio Cable
(LCD175VXM+ only)
Cable Holder

8
Controls
OSD (On-Screen Display) control buttons on the front of the
monitor function as follows:
OSD displayed Shortcut to bright
adjust window
Button
OSD Off Shortcut to contrast
adjust window Select Input Signal
OSD On
(Icon selection
stage)
Go to Adjustment
stage Cursor moves left Cursor moves right
OSD On
(Adjustment
stage)
Go to Icon selection
stage Decrease Value or
Move highlighed
selection to the left.
Increase value or
Move highlighed
selection to the
right.
Reset operation
Turn MUTE on/off
Open Volume
adjust window.
(LCD175VXM+ only)
SELECT – + 1<->2 / RESET
1. Basic key function
2. OSD structure (e.g. LCD175VXM+)
Main Menu (Icon Select, Analog Input)
Sub Menu (Icon Select)
Press
“SELECT”
key
Press
“SELECT”
key
Adjust by using
“–“ or “ +”.
Main Menu (Adjust)
Sub Menu (Adjust)
Press “SELECT” key
Press “SELECT” key
Adjust by using
“–“ or “ +”.
Press “SELECT” key
Press “SELECT” key
Press
“–“ or
“ +”
Press
“–“ or
“ +”

9
Controls - continued
AUDIO (LCD175VXM+ Only)
Controls the volume of the speakers or headphones.
To mute the speaker output, press the “1<->2 / RESET” button.
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO CONTRAST (Analog Input Only)
Adjusts the image displayed for non-standard video inputs.
AUTO ADJUST (Analog Input Only)
Automatically adjusts the Image Position, H. Size and Fine setting.
LEFT/RIGHT (Analog Input Only)
Controls Horizontal Image Position within the display area of the LCD.
DOWN/UP (Analog Input Only)
Controls Vertical Image Position within the display area of the LCD.
H. SIZE (Analog Input Only)
Adjusts the horizontal size by increasing or decreasing this setting.
FINE (Analog Input Only)
Improves focus, clarity and image stability by increasing or
decreasing this setting.
COLOR CONTROL SYSTEMS
Five color presets (9300/7500/sRGB/USER/NATIVE) select the
desired color setting.
The sRGB and NATIVE, color presets are standard and cannot be
changed.
COLOR RED
Increase or decreases Red. The change will appear on screen.
COLOR GREEN
Increase or decreases Green. The change will appear on screen.
COLOR BLUE
Increase or decreases Blue. The change will appear on screen.
TOOL
Selecting TOOL allows you to get into the sub menu.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings
back to the factory settings. The “1<->2 / RESET“ button will need to
be held down for several seconds to have effect. Individual settings
can be reset by highlighting the control to be reset and pressing the
“1<->2 / RESET” button.

10
Controls - continued
OSD Warning: OSD Warning menus disappear with SELECT button.
NO SIGNAL: This function gives a warning when there is no signal present.
After power is turned on or when there is a change of input signal or video
is inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with optimized
resolution. After power is turned on or when there is a change of input signal
or the video signal doesn’t have proper resolution, the Resolution Notifier
window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a change
of input signal or the video signal doesn’t have proper timing, the Out Of
Range menu will appear.
EXIT
Selecting EXIT allows you exit OSD menu/sub menu.
LANGUAGE
OSD control menus are available in seven languages.
OSD TURN OFF
The OSD control menu will stay on as long as it is in use. In the
OSD Turn OFF submenu, you can select how long the monitor
waits after the last touch of a button to shut off the OSD control
menu. The preset choices are 10 - 120 seconds in 5 second inter-
vals.
OSD LOCK OUT
This control completely locks out access to all OSD control functions
without Brightness and Contrast. When attempting to activate OSD
controls while in the Lock Out mode, a screen will appear indica-
ting the OSD are locked out. To activate the OSD Lock Out func-
tion, press “1<->2 / RESET“, then “+“ key and hold down simulta-
neously. To de-activate the OSD Lock Out, press “1<->2 / RESET“,
then “+“ key and hold down simultaneously.
RESOLUTION NOTIFIER
If ON is selected, a message will appear on the screen after 30
seconds, notifying you that the resolution is not at optimal resolution.
DDC/CI
Turns on or off the way communication and control of the monitor.
MONITOR INFO
Indicates the model and serial numbers of your monitor.

14
Monitor
Specifications MultiSync® LCD175VXM+ Notes
LCD Module Diagonal :
Viewable Image Size :
Native Resolution
(Pixel Count) :
17.0 inch
17.0 inch
1280 x 1024
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.264 mm
dot pitch; 270cd/m2 white luminence;
700:1 contrast ratio, typical
Input Signal Video :
Sync : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Separate sync. TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors 16,7M Depending on display card used.
Maximum Viewing
Angles Left/Right : Up/Down : 80°/80° (CR>10) 75°/85° (CR>10)
Synchronization
Range Horizontal : Vertical : 31.5 kHz to 81.1 kHz 56.0 Hz to 76.0 Hz
Automatically
Automatically
Resolutions
Supported 720 x 400*
1
:VGA text
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768*
1
@ 60 Hz to 75 Hz
1152 x 864*
1
@ 70 Hz to 75 Hz
1152 x 870*
1
@ 75 Hz
1280 x 960*
1
@ 60 Hz to 75 Hz
1280 x 1024 at 60 Hz to 75 Hz..................
Some systems may not support all
modes listed.
NEC DISPLAY SOLUTIONS
cites recommended resolution
at 60 Hz for optimal display
performance.
Active Display Area Horizontal :
Vertical : 338.0 mm/13.3 inches 270.3 mm/10.6 inches
Power Supply 100 – 240 V~ 50/60 Hz
Speaker Practical Audio Output 1+1 watts
Current Rating 0.6 - 0.4 A/100-240V
Dimensions 368.0 mm (W) x 379.0 mm (H) x 205.0 mm (D)
14.5 inches (W) x 14.9 inches (H) x 8.1 inches (D
Weight 4.8 kg
10.6 lbs
Environmental
Considerations Operating Temperature : Humidity :
Altitude :
Storage Temperature :
Humidity :
Altitude :
5°C to 35°C/41°F to 95°F
10% to 80%
0 to 10,000 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear
different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel
technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution
must be done.
NOTE: Technical specifications are subject to change without notice.
Specications