TECHNICAL SPECIFICATIONS
Panel technology
Screen diagonal [inch/cm]
Active screen area [cm]
Native resolution [Megapixel]
Landscape / Portrait mode [Pixel]
Pixel pitch [mm]
Contrast ratio (typ.)
Viewing angle (H / V @ CR > 10:1)
Luminance (maximum Native)
Luminance (calibrated)
Response time (typ.) [ms]
Grey scale reproduction [8-bit Dual Link]
Grey scale reproduction [10-bit Single Link PP]
Programmable gamma correction
Factory calibration
Signal inputs
Horizontal frequency [kHz]
Vertical frequency [Hz]
Power consumption (max.) [W]
Power saving mode [W]
Power requirements
Dimensions (W x H x D) [mm]
Weight (including stand) [kg]
Stand features
Safety and ergonomics
Ambient temperature (operating) [°C]
Ambient humidity (operating) [%]
VESA mounting interface [mm]
Kensington Lock (Theft security)
Other advanced features
Approved Display Controllers
Warranty
Shipping contents
Options
UA-SFT TFT
21.3 / 54.0
43.2 x 32.4
3.1
2048 x 1536 / 1536 x 2048 at 60 Hz
0.2115 x 0.2115
900:1
176°/ 176°
1450 cd/m2
400 cd/m2, recommended
27 (tr+ tf)
256 levels from possible 12,241 grey tones
1024 levels from possible 12,241 grey tones
13.5-bit (12,241 grey tones)
Gamma correction according to DICOM GSDF at 400 cd/m2
Digital: 1 x DVI-D; 1 x DVI-I (8-bit Dual Link or 10-bit Packed Pixel Single Link)
31.5 - 93.8
50.0 - 85.0
100
<2.0
100 - 240V AC 1.6 A/0.7 A; integrated power supply
361.6 x 487.4 - 637.4 x 306.0 (portrait); 467.8 x 434.3 - 584.3 x 306.0 (landscape)
10.7
150 mm height adjust range, Tilt, Swivel, Screen rotation
Pending: CE-MDD (EN60601-1, EN60601-1-2); TÜV Approved Medical Device (TÜV GM);
DIN V6868-57 Category A; FDA510(k), CCC
+5 to +35
30 to 80 (non-condensing)
100 x 100 (4 points)
yes
Individual factory calibrated DICOM gamma correction curve; Precise DICOM GSDF calibration
using internal 13.5-bit look-up table; Control buttons on cabinet back side, with virtual keypad on
screen; Multiple OSD lock-out modes to prevent tampering with calibrated screen
Choice of Matrox, AMD/ATI and nVIDIA models for best imaging performance and compatibility
with GammaCompMD software
3 years warranty incl. backlight
Display; Continental and UK power cord; Signal Cable DVI-D to DVI-D; Multiple language quick
reference guide; CD-ROM with User Guides, GammaCompMD Client QA Software and approved
display controller drivers
Calibration instrument (MDSVSENSOR)
MD213MG-04/09
NEC MD213MG
LCDs
•
Projectors
•
Plasmas
•
LCDs
•
Projectors
•
Plasmas
•
LCDs
•
Projectors
•
Plasmas
•
LCDs
•
Projectors
•
Plasmas
•
LCDs
All hardware and software names are brand names and/or registered trademarks of the respective manufacturers. All rights reserved. All specifications are subject to change without notice. 04/09
www.nec-display-solutions.com
NEC Display Solutions Europe GmbH
The data in this publication is for illustration purposes only and does not necessarily represent standards or specifications which must be met by NEC Display Solutions. All hardware and software names are
brand names and/or registered trademarks of the respective owners. All rights reserved, in particular for the case of granting of patent or petty patent. Availability and technical specifications are subject to
change without notice. Issue: 02/09
3 Megapixel
Single or Dual Display
Clear Base
8 Bit or 10 Bit
PCI Express Bus
GammaCompMD Software
Display Model variety
Display controller board variety
Software
NEC MD SERIES GREYSCALE DISPLAY SYSTEMCONFIGURATIONS*
A typical NEC MD
Series Display
System configuration
1 Single or Dual head displays
2 Display Controller
Board
3 GammaCompMD
Quality Assurance Software
4Calibrator (optional)
CE-MDD declaration for model MD213MG is in accordance with the European Directive
93/42/EEC (Medical Device Directive). NEC MD Series Display Systems are registered as
medical devices at DIMDI and succeeded pre-qualification for the German X-ray ordi-
nance acceptance tests according to DIN V6868-57.
www.medical.nec-display-solutions.com
