
Steam en
15
3. Use the or button to set "Dough proving" .
4. Use the button to navigate to the next row.
5. If necessary, use the button to set setting 2.
6. Use the button to navigate to the next row.
7. Use the or button to select the required proving
time.
8. Press to start the dough proving process.
→"Pausing operation", Page13
→"Cancelling operation", Page13
aIf the water tank runs dry during the dough proving
process, dough proving will be paused.
→"Refilling the water tank", Page14
aOnce the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page12
9. Press any button to end the audible signal.
10. Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page16
Defrost
Use the "Defrost" function to defrost deep-frozen and
frozen products.
Configuring the Defrost heating function
1. Fill the water tank.
→"Filling the water tank", Page13
2. Press to switch the appliance on.
3. Use the or button to set "Defrost" .
4. Use the button to navigate to the next row.
5. Use the or button to select the required temperat-
ure.
6. Use the button to navigate to the next row.
7. Use the or button to select the required defrosting
time.
8. Press to start the defrosting process.
→"Pausing operation", Page13
→"Cancelling operation", Page13
aIf the water tank runs dry during the defrosting pro-
cess, defrosting will be paused.
→"Refilling the water tank", Page14
aOnce the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page12
9. Press any button to end the audible signal.
10. Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page16
Reheat
The "Reheat" function is used to warm up food that has
already been cooked, or bread and pastries from the
day before, without affecting its quality.
Configuring the Reheat heating function
1. Fill the water tank.
→"Filling the water tank", Page13
2. Press to switch the appliance on.
3. Use the or button to set "Reheat" .
4. Use the button to navigate to the next row.
5. Use the or button to select the required temperat-
ure.
6. Use the button to navigate to the next row.
7. Use the or button to select the required reheating
time.
8. Press to start the reheating process.
→"Pausing operation", Page13
→"Cancelling operation", Page13
aIf the water tank runs dry during the reheating pro-
cess, reheating will be paused.
→"Refilling the water tank", Page14
aOnce the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page12
9. Press any button to end the audible signal.
10. Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page16
8.4 Steam-assisted cooking
When you cook with steam assistance, the appliance
introduces steam into the cooking compartment at vari-
ous intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy, tender and only under-
goes a minimum reduction in volume.
Heating functions compatible with steam
assistance
You can switch on steam assistance for the following
heating functions:
¡"CircoTherm hot air"
¡"Top/bottom heating"
¡"Circo-roasting"
¡"Bread-baking setting"
¡"Keep warm"
Switching on steam assistance
1. Fill the water tank.
→"Filling the water tank", Page13
2. Press to switch the appliance on.
3. Set a suitable heating function.
→"Heating functions compatible with steam assist-
ance", Page15
4. Set the required temperature.
5. Use the button to switch on steam assistance.
6. Use the button to navigate to the row featuring
the steam intensity .
7. Use the or button to select the required steam in-
tensity:
– Low
– Medium
– High
8. Press to start steam-assisted heating.
aIf the water tank runs dry during steam-assisted
heating, "Fill water tank" will appear on the display.
The appliance will continue to heat but without in-
jecting steam into the cooking compartment.
→"Refilling the water tank", Page14
Cancelling steam-assisted cooking
▶Press .
aThe appliance will continue to heat but without in-
jecting steam into the cooking compartment.
Ending steam-assisted heating
1. Press to switch the appliance off.
2. Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page16