Neilsen CT5477 User manual

25 M AUTOMATIC CABEL REEL CT5477
ORIGINAL INSTRUCTION
Please read these operating instructions carefully and note the information given.
Use these operating instructions to familiarize yourself with the product, the
proper use and the safety instructions.
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety and
health requirements of the EC Directive based on its design and type, as brought into
circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration will lose its
validity.
Product description:
25M AUTOMATIC CABEL REEL
Model: CT5477
Applicable EC Directives:
Low Voltage Directive 2014/35/EU
Harmonized standards
EN 61242:1995+A11:2004+A12:2006+A1:2008+A2:2016
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2019-10-11

Correct use:
The Hose Reel is provided with auto rewind system and intended for use in the private home
and workshop or repair shop etc.
Parts list:
No Description Quantity
1 Hose reel 1
2 Metal bracket 1
3 6 x 10mm Screw 1
4 6 x 50mm bolts 4
Technical data
Cable section
3x1.5 mm²
Cable length 25+1m
Voltage 230 V
Power 1000W / 2300W
Weight 8.8 kg
Dimensions 320x200x340 mm
Installation
The reel could be installed horizontally, vertically on
the cement pillar, cement wall or steel structure.
1. Take out the unit and accessories from the box，
2. Choose a suitable place near the power supply.
3. Take the mounting bracket as a template to mark
the position for screws and drill four holes on the wall.
Fig.1
4. Fix the bracket by four 6 x 50mm screws accordingly,
5. Slip the reel to the mounting bracket,then fasten it by
1 x 6 x 10mm screw. See Fig.2
Note: 1. The reel could be installed to a wall/ post or ceiling.
2. It is suggested to mount the reel approximately 1 meter
above the ground.
Fig. 2
Fig. 1

Operation
Connect the leader cable to the power supply.
Unwind
-Pull out cable to desired length and stop after “KAKA” sound is heard.
Roll up the cable
- Release the lock by one more pull and let the hose back.
-Please always hold the end of the cable when it is going back to the hose box.
-Turn off the power.
Storage
Cleaning
The hose box is maintenance-free and must not be cleaned internally with water.
Maintenance
-When not in use, please turn off the power source,
-The reel cannot not be used to transmit any chemical and substance.
-When not in use for an extended period of time it is recommended to be stored in a cool dry
place.
Troubleshooting
During the process of retracting / pulling out the cable. If the cable is locked, please pull out
more cable again, then retry the work.
CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
Made in China