Nephros DSU-D User manual

DSU-D
MACHINE
DISCONNECT
INLET
DSU-D
MARK EDGES
INSERT
SCREW
SCREW
C
A
D
B
E
Installation Guide for Hemodialysis Quality Water
1. WASH hands before starting installation.
2.
3.
product material.1
1.
1. Turn OFF the water supply to the dialysis machine from wall box
or RO outlet.
2. DISCONNECT water inlet hose from back of dialysis machine and
replace with a new hose.
www.nephros.com | 1
1.
individual RO cart in the position it will be mounted.
2. MARK the edges of the clips at their locations.
1. INSERT a quick connector to the free end of the old hose previous-
ly disconnected from the dialysis machine.
1. DRILL holes for the screws and MOUNT the clips with their
enclosed screws.
If external cleaning of DSU-D is needed, use 1% BLEACH
1
alkyl dimethyl benzyl ammonium chloride (ADBAC). See DSU-D and SSU-D Instructions for Use
1
WALL BOX
TURN OFF
WATER
WALL BOX
WALL BOXWALL BOX
SCREW
SCREW
MARK EDGES
INLET
TURN OFF
WATER

FLOW
OPEN
12” FLOW12”
FLOW
CONNECT
CONNECT
MACHINE
F
I
G H
Installation Guide
1.
1. TURN ON the water supply and KEEP OPEN the sample port valve
the sample port as water will be exiting.
2. CLOSE the sample port valve after purging the air out.
3. DISINFECT the lines downstream of the DSU-D (or SSU-D) as per
standard clinic procedures before putting the dialysis machine to use.
1. CONNECT quick connector to a new tubing line.
2. CONNECT a sample port approximately 12” away from the quick
connector.
3. CONNECT a check valve approximately 12” from the sample port.
4. CONNECT the other end of the check valve to the new tubing line
made in a previous step that’s feeding into the dialysis machine.
5.
1. CONNECT the water line from wall box or RO outlet with the quick
2. CONNECT the quick connector on the new tubing made in the
www.nephros.com | 2Nephros, Inc.
50-3015 r.541 Grand Avenue, River Edge, NJ 07661, USA • 201-343-5202
FLOW
FLOW
FLOW
OPEN
12"
12"