Nero YSW2519-05E User manual

SPECIFICATION
AVAILABLE FINISH
PACKING INCLUDES
-1x hand shower (built-in check valve)
-1x shower head
-1x shower arm
-1x shower rail
-1x1.5m PVC hose
-2x back plates
-1x slider bracket
-1x installation kit
WaterMark
AS/NZS 3662
WM-060093
PRODUCT CODE
WELS RATING
WATERMARK LICENSE
TEMPERATURE RATING
PERSSURE RATING
All surfaces should be cleaned with mild liquid detergent or
soap and water. Do not use cream cleaners or citrus based
cleaning products, as they are abrasive. Use of unsuitable
cleaning agents may damage the surface.Any damage caused
in this way will not be covered by warranty
MAINTENANCE AND CARE
YSW2519-05E
2Star 11L/Min
WM-060093
Min 1℃-Max 75℃
Min 150KPa-Max 500Kpa
11.0
NR251905eGR NR251905eBN
NR251905eBZ NR251905eBG
BRUSHED BRONZE BRUSHED GOLD
Opal Twin Shower set
450
780.5
1230.5
φ25
φ25
φ35
339
φ250
130
GRAPHITE BRUSHED NICKEL
18.6

www.nerotapware.com.au
rubber
washer
5.Screw shower head to shower arm
with care. (Note the rubber washer in
the shower head.)
580-680（recommendation）
1.Drill a φ6mm hole at the downwards
outlet verticaldownward position
in the recomendation range.
6
outlet
Apply thread
seal sealant
or teflon tape
G1/2
All products must be installed by licensed plumbers.
All pipework must be thoroughly flushed prior to installation, as foreign materials
may block the flow regulating device and reduce the flow of water.
Important
2. Screw the adapter onto the outlet.
Push wall plug into drilled hole. Fit
lower mounting pillar in place with
screw. Tighten firmly.
3. Screw shower rail into shower
arm component. Tighten firmly.
Push 2 back plates onto shower arm component
and lower mounting pillar.
4. Locate and push shower rail
assembly onto wall adaptors.
Tighten grub screws firmly with allen
key provided.
Slide the back plates against the
wall/tile face properly.
rubber
washer
rubber
washer
6. Please noted the rubber washer in the hand
shower.
Connect shower rail and hand shower with hose.
TEST & CHECK FOR LEAKS.