Nero YSW2519-05A User manual

SPECIFICATION
AVAILABLE FINISH
All surfaces should be cleaned with mild liquid detergent or
soap and water. Do not use cream cleaners or citrus based
cleaning products, as they are abrasive. Use of unsuitable
cleaning agents may damage the surface.Any damage caused
in this way will not be covered by warranty
PACKING INCLUDES
-1x hand shower (built-in check valve)
-1x shower rail
-1x adapter
-1x shower bracket
-1x 1.5m PVC hose
-2x back plates
-1x installation kit
WaterMark
AS/NZS 3662
WM-060093
PRODUCT CODE
WELS RATING
WATERMARK LICENSE
TEMPERATURE RATING
PERSSURE RATING
MAINTENANCE AND CARE
YSW2519-05A
3Star 9L/Min
WM-060093
Min 1℃-Max 75℃
Min 150KPa-Max 500Kpa
NR251905aBN
BRUSHED NICKEL
NR251905aBG
BRUSHED GOLD
238
100.3
705
730
66.5
G1/2
110
Opal Rail Shower

www.nerotapware.com.au
3. Slide both top and bottom back plate onto
the rail assembly, as shown on the picture.
2. Screw the adapter onto the outlet.
Push wall plug into drilled hole. Fit
lower mounting pillar in place with
screw. Tighten firmly.
1.Drill a φ6mm hole at the downwards
outlet verticaldownward position
in the recomendation range.
500-600（recomendation）
6
outlet
4. Push shower rail assembly onto
the wall/tile face.
Tighten grub screws firmly.
Slide the back plates against the
wall/tile face properly.
G1/2
Apply thread
sealant or
teflon tape
rubber
washer
rubber
washer
5. Connect shower rail and hand shower with hose.
TEST & CHECK FOR LEAKS.
All products must be installed by licensed plumbers.
All pipework must be thoroughly flushed prior to installation, as foreign materials
may block the flow regulating device and reduce the flow of water.
Important