Ness Trans Pac 104-286 Series User manual

Infrared LED Illuminator
104-286 Series
IP66 RoHS
INSTRUCTION MANUAL
www.ness.com.au

SAFETY WARNING / SPECIFICATIONS
Model Number 104-286
IR Light Distance Approach To 60M
IR Light on / off Auto Light Sensor Control
LED Quantity 6 IR LEDs
Infrared Led Beam Angle 45 ﾟ
Power Input AC24V (+/-10%)
Rating Current 1.5A
Blower Control 35℃(on) / 25℃(off)
Environmental Operating Temp. -40℃~ +50℃
Protection Level IP66
Temper Glass Thickness 4mm
Mounting Method Side or Underneath
Construction Die-Cast Aluminum Alloy
Coating Ivory Powder Stove
Dimension 170(L) x 120(W) x 115(H) mm
Net Weight 1500gm
＊IR Light Distances are entirely dependant upon environmental site conditions and the location at
which the unit is situated. The type of camera being used is also very important.
2
CAUTION:
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
UNPACKING:
Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace it correctly in its carton and notify the distributor.
IMPORTANT INSTALLATION NOTICE:
TROPICAL, COASTAL SALTWATER ENVIRONMENTS.
If you plan to install this camera into a TROPICAL, SEA, COASTAL SALTWATER or CORROSIVE
INDUSTRIAL water / mist environment, please seal each Stainless Screw and Fittings with a
SILICON GREASE COMPOUND. This will help prevent ELECTROLYSIS CORROSION occurring
and extend the Lifespan of the Camera and Housing.
IMPORTANT NOTE:
Always unplug the top section of the earth wire from the base wire when disassembling the housing.
Remember to plug the top and bottom back together when reassembling the housing.

PART DESCRIPTION
3
Cable conduit
11 22 33 44 55 66 77 99 88 1010
1111 1212
11
Temper Glass
IR LED : 6pcs super high power IR LED with refractor. .
2
3
IR Board and IR Board Bracket
4
IR Control Board
5
Power Supply Unit : AC24V for 104-286
6
Blower and Blower Bracket
22
33
IR Board and IR Board Bracket
44
IR Control Board
55
Power Supply Unit : AC24V for 104-286
66
Blower and Blower Bracket
1616
1313
1414
1515
AC IN OUT
L E N L E N
MADE BY TRANSPAC IN TAIWAN P2TPIR0008B
MAX MIN
250V/3.15A
Fuse
AC IN OUT
L E N L E N
MADE BY TRANSPAC IN TAIWAN P2TPIR0008B
MAX MIN
250V/3.15A
Fuse
77
88
99
1010
1111
1212
1313
1414
1515
Live : Brown wire.
Earth : Yellow/Green wire.
Neutral : Blue wire.
VR : Adjust VR to set Infrared LED activation level. .
Blower Thermostat Switch : Turn on at 35ﾟC and turn off at 25ﾟC.
Fuse Holder : With 250V/3.15A fuse. .
Terminal block : To power supply unit. .
Terminal block : AC 24V external power input. .
1616
Ground wire: To top Cover.

* Ness Security Product Branches:
[email protected]
www.ness.com.au
Sydney (Head Office)
Ness Security Products Pty Ltd
ABN 28 069 984 372
4/167 Prospect Highway
Seven Hills NSW Australia 2147
Phone: [phone]
FAX (Sales): 02 9674 2520
Fax (Purchasing): 02 9674 8064
[email protected]
Melbourne
24 Terracotta Drive
Blackburn VIC 3130
Phone: [phone]
Fax: [phone]
[email protected]
Brisbane
Unit 3A / 471 Lytton Road
Morningside QLD 4170
Phone: [phone]
Fax: [phone]
[email protected]
Perth
Unit 1, 567 Newcastle Street
Perth WA 6000
Phone: [phone]
FAX: [phone]
[email protected]
Adelaide
Unit 1 / 22 Ware Street
Thebarton, SA 5031
Phone: [phone]
Fax: [phone]
1. Underneath Mounting
2. Side Mounting
To external power input
Cable Conduit
Right SideLeft Side
Washer
Screw
WIRING INSTRUCTION:
4
PART DESCRIPTION / INSTALLATION