NP3680W – Quick Install Guide
Install the Utility Software
1. Insert the included CD-ROM into your computer
2. The Autorun screen should appear. Follow the prompts to install the utility
Set Up your Devices
Set up Printer
Make sure that your printer is connected to your
NP3680W, and the printer drivers are installed
1. Click Start. Navigate to All Programs > NetComm
> MFP Server Control Centre and click on MFP
Server Control Centre
The following screen will appear
2. Select the printer from the list you want to connect
3. Click connect from the Tool bar to complete the
set up
Set up USB Storage Device
Make sure that your USB storage device is connected to
your NP3680W
1. Click Start. Navigate to All Programs > NetComm
> MFP Server Control Centre and click on MFP
Server Control Centre
The following screen will appear
2. Then select your USB storage device
3. Click the Network Storage Button to complete
the set up
For Advanced Set Up, including configuring your NP3680W, please refer to the
NP3680W User Guide, located on the accompanying CD