NP3680W
11g Wireless Multifunction Server
TECHNICAL SPECIFICATIONS
PRINT SERVER
•Supported Printers: Standard USB printers and MFPs from
Brother, Canon, Epson, HP, Lexmark, Minolta, OKI,
Sharp, etc.
(Note: please check www.netcomm.com.au for a compatibility list)
•Supports GDI Printers
•Supported Operating Systems: Microsoft Windows: 98SE,
ME, 2000, XP, 2003, and Vista; Unix/Linux; Apple Mac OS
X 10.3.x or later
•Supported Protocols: TCP/IP: LPR, Raw TCP, SMB/CIFS,
IPP, Rendezvous/Bonjour (Mac OS X)
FILE SERVER
•Supported Devices: Support for USB Mass Storage and
Memory Card readers
•Supported File System: FAT 12/16/32, NTFS
•Supported Operating Systems: Microsoft Windows: 98SE,
ME, 2000, XP, 2003 and Vista; Unix/Linux; Apple Mac OS
X 10.3.x or later
•Supported Protocols: FTP Server and SMB Server
SCAN SERVER
•Supported Scanners: Standard USB and MFP scanners
from HP and many other manufacturers. (Note: please
check www.netcomm.com.au for a compatibility list)
•Supported Operating Systems: Microsoft Windows: 98SE,
ME, 2000, XP, 2003, and Vista; Unix/Linux; Apple Mac OS
X 10.3.x or later
•Supported Protocols: SANE Server
NETWORK CONNECTION
•LAN (10/100Mbps Ethernet): Dynamic IP (DHCP), Fixed IP
•WLAN IEEE 802.11 b/g with WEP/WPA security
MANAGEMENT
•Supported Protocols: DHCP, FTP, HTTP, SNMPv1/v2c/v3
•Supported web browsers: Any standard web browser
(Netscape 6.x or higher and MS Internet Explorer 5.x or higher)
•Server Management: Internal web pages for configuration,
monitoring and firmware upgrading, Windows tool for
installation, configuration, monitoring and firmware
upgrading
•Firmware Upgrade: Firmware upgrades using the internal
web pages, Windows Tool, and TFTP
HARDWARE
•Key Components: 2 x USB 2.0 Hi-Speed host ports to
USB devices, Ethernet 10/100Mbps, ARM9-based RISC
microprocessor, operating at 166MHz, Memory: 2MB Flash,
8MB RAM
•Front Panel: 5 LED indicators (Power, LAN, WLAN, USB1
and USB2); Init button for resetting to factory defaults and
for TFTP firmware upgrade
•Dimensions: 2.6cm x 7.6 cm x 10.4 cm (HxWxD)
•Weight: 85g
•Power Consumption: External Supply (12V 1A), Maximum
consumption 2.5W (Without Peripherals)
•Power Support for USB Port: 5V, 0.75A
ENVIRONMENTAL CONDITIONS
•Operating Temperature: 0°-50°C
•Humidity
PACKAGE CONTENTS
• NP3680W USB 2.0
Multifunction Server
• 12V 1A power supply
• USB cable
• RJ-45 Ethernet cable
• Driver/Manual & Utility
Software CD
• Quick Start Guide
MINIMUM SYSTEM REQUIREMENTS
• Ethernet network connection
• A Windows-based PC with a network connection and
Web browser (browser required for configuration only)
• Power point to plug in power adaptor
• USB 2.0 peripherals
KEY FEATURES
• Share USB 2.0 Hi-Speed devices on your wireless Network
• Designed for an extensive range of Standard and Multifunction Printers
(See website for compatibility list)
•
Connect and Share USB Hard Disk, Flash Drives and Card Readers
• Supports SMB/CIFS and FTP servers with user level security
• SANE Server support for scanners
• Windows tools for 98SE, Me, 2000, XP and Vista
• Simple Web-based setup and configuration
DYNALINK NZ 224b Bush Road, Albany, Auckland, New Zealand
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
CONNECTION DIAGRAM
