NETGEAR AirCard 797 User manual

To set up your mobile hotspot:
1. Insert the battery.
2. Install the back cover.
3. Firmly close the back cover.
4. Press the Power button to power on the mobile hotspot.
AirCard 797 Mobile Hotspot

To recharge your battery:
1. Connect the micro USB charging cable to your mobile hotspot.
2. Connect the other end of the cable to the USB port on your computer or to the USB
charger.
LCD Screen, Icons, Buttons & Connectors
Power/Wake button Status LED
LCD screen Micro USB charging port

Signal strength
Network indicator
Battery
WiFi details
Connected devices
Unviewed messages
LCDscreendisplay
DescriptionIcons
This indicates the strength of the mobile broadband network signal.
Your 4G LTE wireless device displays one of the following network indicators to let you know which wireless
network you are connected to.
•Connected to AT&T’s 4G LTE network.
•Connected to AT&T’s HSPA+ network.
This indicates the battery is charging.
This indicates the battery is fully charged.
This indicates the mobile router is plugged in to an external power supply and is operating without a
battery.
This indicates there are unread alerts.
HomeScreen
Youcanusethehomescreeniconstoviewthemobilehotspot’sstatus,configureWi-Fi
settings,viewdatausagedetails,andviewsystemalerts.

To connect to the Internet:
1. Press and release the Power button to turn on the mobile hotspot.
2. On your laptop or Wi-Fi device, open your Wi-Fi network connection manager.
3. Connect your device to the hotspot with the Wi-Fi name and password.
Note:YourWiFinetworknameisdifferentfromthisexample.
Connect to the Internet
When you turn on your mobile hotspot, it automatically connects to the network in your
area. Connect your device to the mobile hotspot Wi-Fi network to access the Internet.