NETGEAR R8000 User manual

Quick Start
1
On your mobile phone,
download the Nighthawk
app and follow the setup
instructions.
Tap the Security icon in your
Nighthawk app to verify that
NETGEAR Armor is activated.
Check out everything you
can do on the Nighthawk
app! Pause the Internet, run a
speed test, set smart parental
controls, and more.
2
Secure your
devices with
NETGEAR Armor™
3
Do more with the
app
Your Nighthawk comes
with NETGEAR Armor
cybersecurity. Armor blocks
online threats like hackers
and phishing attempts on
your devices.
Download the
Nighthawk app to
install your router

Contents
Overview
Router Ethernet Cable Power Adapter
(varies by region)
A
USB 2.0 port
F
Reset button
1
Power LED
6
USB 3.0 LED
B
LED On/Off switch
G
Power connector
2
Internet LED
7
USB 2.0 LED
C
Ethernet ports 1–4
H
Power On/Off button
3
2.4 GHz WiFi LED
8
Ethernet ports 1–4 LEDs
D
Internet port
I
WiFi On/Off button with LED
4
5 GHz 1 WiFi LED
E
USB 3.0 port
J
WPS button with LED
5
5 GHz 2 WiFi LED
2
4
1
3
5
7
8
J
I
6
B C D E F G HA
Troubleshooting
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity,
visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
June 2020
If you’re having problems with the installation, try one of the following:
• Turn off your modem and router and disconnect them. Reboot your
modem. Reconnect your router to your modem, and try installing with the
Nighthawk app again.
• If you’re still unable to install your router using the Nighthawk app,
manually install it using the router web interface.
Visit http://www.routerlogin.net to access the router web interface.
For more information, visit netgear.com/routerhelp.
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Support and Community
Regulatory and Legal