NETPRO MikroTik User manual

Hotel Wifi Solution with MikroTik
CAPsMAN, HotSpot and User Manager
MikroTik MUM Myanmar October 1, 2015
Presented By Aung Myo

About Me
•Mr. Aung Myo
•Director of NETPRO Myanmar Co.,Ltd
•Mikrotik Certified Consultant
•MCSE, MCITP(EA), JNCIA(ER), JNCIS(ER), CCNA, CCNA-S,CCDA, CCDP, CCNP,
MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE
•www.netpromyanmar.net
•[e-mail]
•09448009449, 09975558020
•www.facebook.com/netpromyanmarcompany
•www.facebook.com/mikrotikmyanmar

Hotel Wifi Solution
1. Receptionist Create the Wifi Internet access account in
Mikrotik User Manager depend on room type or
whatever
2. Generate voucher and give it to Guest for Internet
Access

Hotel Wifi Solution with MikroTik
•CAPsMAN (Controlled Access Point system
Manager) also known as WLAN controller
•HotSpot
•User Manager

CAPsMAN Feature
•Centralized management of RouterOS APs
•Dual Band AP support
•Provisioning of APs
•MAC and IP Layer communication with APs
•Certificate support for AP communication
•Full and Local data forwarding mode
•RADIUS MAC authentication
•Custom configuration support

CAPsMAN Version
•CAPsMAN v1
•CAPsMAN v2
NOTE: CAPsMAN v2 is NOT compatible with CAPsMAN v1
(CAP)
Controlled Access Points
AP
(CAPsMAN)
Controlled Access Point system Manager
Controller
CAPsMAN+CAP CAPCAP

CAPsMAN LAB
Internet
1
CAPsMAN+CAP1
CAP2 CAP3
SSID:HOTEL-GUEST(VLAN10-192.168.10.0/24)
SSID:HOTEL-MGMT(VLAN20-192.168.20.0/24
SSID:HOTEL-HR(VLAN30-192.168.30.0/24)
SSID:HOTEL-ADMIN(VLAN40-192.168.40.0/24)
HOTEL-GUEST
HOTEL-MGMT
HOTEL-HR
HOTEL-ADMIN
Internet
2

Require Package List
CAPsMAN
CAP

Network Infra Configuration
•1. Interface Master/Slave Configuration
•2. Bridge Configuration
•3. VLAN Configuration
•4. IP addressing
•5. WAN Configuration with Load Balancing
•6. NAT, NTP, Timezone and DNS
CAPsMAN+CAP1, CAP2, CAP3

Internet
1
CAPsMAN+CAP1
CAP2 CAP3
SSID:HOTEL-GUEST(VLAN10-192.168.10.0/24)
SSID:HOTEL-MGMT(VLAN20-192.168.20.0/24
SSID:HOTEL-HR(VLAN30-192.168.30.0/24)
SSID:HOTEL-ADMIN(VLAN40-192.168.40.0/24)
HOTEL-GUEST
HOTEL-MGMT
HOTEL-HR
HOTEL-ADMIN
Internet
2
CAPsMAN LAB
WAN1 WAN2
Bridge1
Bridge1
Bridge1

CAPsMAN and CAPs configuration
Click CAPsMAN interface, check the “Enabled” for CAPsManager device.
Click Wireless interface>click Interfaces tab>click the CAP button
and Check the “Enabled” for CAP device.
* CAPsManager device itself can be enable CAP.

CAPsMAN see all CAPs
When we enabled CAPsMAN and CAP, you may see the remote AP under the tab of Remote CAP of
CAPsMAN device.

Recipe of CAPsMAN
•Channel
Can define Frequency and width, etc..
•Datapath
Can define the data forwarding related settings, such as bridge to which particular
interfaces should be added automatically as port.
•Security
Can define authentication types or passphrase
•Configuration
Main wireless settings group, includes setting such as SSID and additionally binds
together with other setting such as channel, datapath, security, etc…
•Provisioning
Can define each AP for provisioning.

Channel Configuration

Datapath Configuration

Security Configuration

Virtual AP Configuration

Manual Provisioning

CAPsMAN Finished!!!!
All created virtual AP can see with bounding condition.

HotSpot Configuration
To use this feature, you must have installed and enabled "hotspot" package.
1.Go to IP>hotspot. Click the hotspot setup button under the server tab.
So you will see the pop-up box will appear. Select a desire interface from the drop down list. Then, Click Next.
2.It is automatically detect the IP address of the interface. Then, Click Next.
3.Check the IP pool ranges. You can adjust your pool ranges to give out. Then, Click Next.
4.We don't need certificate and SMTP server address. Leave as default.
5.Set the DNS server IP address. And then, Click Next.
6.Set the DNS Name.(Example :www.example.com )
7.You must create at least one hotspot user account.
If you set up those step correctly, you will be created hotspot successfully.
* You can manage the hotspot user by connecting with User Manager.