NETGEAR FS308 - Switch User manual

Installation Guide
Ethernet Switch FS305/FS308
Step 2. Connect power Step 3. Check status
Optional
modem
Step 1. Connect equipment
FS305
Optional router
Computer Server
Internet
On
Off
Power LED Port LEDs
No link (off)
Activity (blinking)
Ethenet link

Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label
of your product and use it to register your product at https://
my.netgear.com.
You must register your product before you can use NETGEAR
telephone support. NETGEAR recommends registering your
product through the NETGEAR web site. For product updates
and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR
support resources.
Specifications Description
Network interface RJ-45 connector for 10BASE-T and 100BASE-
TX
Network cable Category 5 (Cat 5) or better Ethernet cable
Ports FS305: 5
FS308: 8
Power adapter 12V @ 1.0A DC input
Power consumption FS305: 2.3W
FS308: 2.7W
Weight FS305: 0.24 Kg (0.53 lbs)
FS308: 0.38 Kg (0.83 lbs)
Dimensions
(W x D x H) FS305: 102 mm x 94 mm x 26 mm
(4.02 in. x 3.70 in. x 1.02 in.)
FS308: 158 mm x 102 mm x 26 mm
(6.22 in. x 4.02 in. x 1.02 in.)
Operating temperature 0°–40° C (32°–104° F)
Operating humidity 10%-90% relative humidity, noncondensing
Certifications CE mark, CE Class B
January 2013 For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or
registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States
and/or other countries. Information is subject to change without notice. Other brand
and product names are registered trademarks or trademarks of their respective
holders. © NETGEAR, Inc. All rights reserved.
Intended for indoor use only in all EU countries, EFTA states, and Switzerland.