
3
C. Usage
D. Maintenance and Care
E. FAQ
1. Using a separate vessel, boil water to a temperature of 50°C or 122°F.
2. Fill the product with boiling water to the indicated line.
3. Dampen the wooden frame/bottom and the rice net.
4. Place the rice net inside the wooden frame, and fold the edge of the net around the frame.
5. Put the cooled sushi rice in the rice net.
6. Plug the product into the electrical outlet.
• Caution: Do not touch electrical outlets with wet hands.
• To avoid condensation from dripping into the sushi rice, quickly open the lid
vertically.
1. When you are done using the product, please throw away the used water and dry the product
with a clean towel.
2. Allow the product to cool completely before cleaning.
3. Wash the lid with soap and water.
4. Dry completely before storing.
5. Change the water with every use. Reusing water will cause the product to not work properly
and break.
6. When cleaning the inner pot, do not use scrubbers as they are too abrasive and can damage the
nonstick coating. Unless the inner pot gets dirty, please avoid using harsh detergents. Use a wet
towel to dry completely.
7. If the inner pot burns or gets dirty, please wash gently with detergents, using the smallest
amount possible to achieve desired results.
If your Ever Hot Rice Warmer is not working properly, please refer to the chart below to nd a pos-
sible solution. Is problem is not listed below please consult your distributor.
Problem Reason Solution
Sushi rice gets cold Is there boiled water in the product? Fill the product with boiled water
to the indicated line.
Unit does not turn on Is your electrical outlet working? Turn the breaker on or contact
your electrician.
Did you leave the cover o? Keep the cover on product while
in use.
Did you the product multiple times
without lling with water?
Please consult the distributor.
Sushi rice gets hard Did you leave the product on for sev-
eral hours?
Do not leave product on several
hours to avoid the sushi rice from
cooking.