NEW AIM PTY LTD BBed-JM01 User manual

NEW AIM PTY LTD
Made in China
BBed-JM01
JM-01

P.1
Safety Precaution
WARNING:
TOP BUNKS AND ELEVATED BEDS ARE DANGEROUS AND ARE
NOT RECOMMENDED FOR CHILDREN UNDER THE AGE OF 9
WARNING:
THE UPPER BUNK MUST BE MORE THAN 2 M FROM ANY
CEILING FAN.
Falls from elevated beds can be fatal and deaths have occurred
where children have fallen from elevated beds. This is relevant for
all ages. The risk is greater for younger children.
The risk of injury or death from a fall from an elevated bed
compared to a non-elevated bed is:
10 x greater for 7-8 year olds
7 x greater for 9-10 year olds
3 x greater for 11-12 year olds
!
!

P.2
Safety Precaution
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL INSTRUCTIONS
Follow the instruction on the WARNING labels on top bunk and the package.
DO NOT REMOVE THE LABELS FROM THE BED
Always use the recommended size mattress, mattress support, or both, to prevent
the likelihood of entrapment or falls
The top surface of the mattress must be at least 5 inches below the upper edge of
the guardrails
Weight Capacity on top bunk is 65kg
DO NOT allow horseplay on the bunk bed. Always PROHIBIT jumping on the bed
Children SHOULD BE discouraged from playing on the bunk bed
Periodically check and ensure that the guardrail, access device and other
components are maintained in the correct position and state of repair and that all
connectors are tight
DO NOT use any substitute parts. Contact the manufacturer or dealer for
replacement parts
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk
that are not designed for use with the bed, but not limited to hooks, belts,
or jump ropes
Keep these instructions in a safe place for future reference

Part List
P.3
Nut
Allen Key
Wood dowel
Wheel
A
B
C
D
E
K
G
H
F
M
N
O
P
Q
64
24
24
1
56
2
26
6
4
8
8
8
16
Tools required
O1
O1 :12
K1K2
O2O2 :12
Lay out all the
parts and check
the quantity

Bunk Bed Part List
P.4
E
E
E
E
E
E
E
E
EE
E
E
E
E
E
E
E
E
5
1
3
2
4
6
7
22
22
18
18
23
10
10
22
11
11
11
21
21
20
20
17
17
14
14
11
11
16
16
15
9
9
9
18
23
10
9
9
8
x2
E
E
23 x2
x2 x2
x4
x4
Inserts the wooden
connectors (Part E) into the
boards (Part 09, 10, 11, 14, 17,
18, 20, 21, 22,23)
(as illustration)
!

Drawer Part List
P.5
1
2
2
3
5
3
3
6
4
4

Instructions
P.6
Step 1:
B
B
B
B
G
G
G
G
G
G
G
G
B
G
G
B
G
G
B
G
G
B
G
G
C
C
C
C
C
C
C
C
1
2
4
3
18
23
10
9
9
22
5
6
7
8
18
23
10
9
9
22
Headboard and Footboard
Headboard
Footboard
Insert bolts (Part B & G) into the posts (01 & 02). Place the nuts (Part C) on each end of
headboards (09). Screw the bolts through the posts and headboards securely.
Insert bolts (Part B & G) into the posts (03 & 04). Place the nuts (Part C) on each end of
headboards (09). Screw the bolts through the posts and headboards securely.
Insert bolts (Part B & G) into the posts (05 & 06). Place the nuts (Part C) on each end of
footboards (09). Screw the bolts through the posts and footboard securely.
Insert bolts (Part B & G) into the posts (07 & 08). Place the nuts (Part C) on each end of
footboards (09). Screw the bolts through the posts and footboard securely.

Instructions
P.7
Step 2:
c
c
c
c
B
B
B
B
B
B
B
B
c
c
c
c
11
11
D
Note:
Side rail with hole for
the ladder side!
c
c
Lower Bunk
Use bolts and nuts (Part B and C) to secure the
side rails (Part 11) with the assembled headboard
and footboard, forming 2 bed frames (as
illustration).
Hand tighten all bolts with allen wrench

Instructions
P.8
Step 3:
11
11
G
G
G
G
c
c
c
B
B
B
B
B
B
B
B
c
c
c
c
c
20
14
21
17
D
Note:
Side rail with hole for
the ladder side!
Upper Bunk
Hand tighten all bolts with allen wrench
Use bolts and nuts (Part B, C, and G) to rmly
secure side boards (14, 20, 17, and 21) with
the assembled bed frame in step 2 .

F
F
F
F
Instructions
P.9
Step 4: Connecting the upper bunk with the lower bunk
Insert connector pins (Part F) into holes
located on the top of lower bunk foot
and headboard. Place top bunk over
pins and onto lower bunk

Instructions
P.10
Step 5:
D
K 1
K 2
G
G
A
A
A
A
H
H
H
H
15 16
16
H
H
H
H
Secure the upper bunk bed
with the lower one with Screws (Part A).
Secure the upper bunk bed and ladder
Hand tighten all bolts
with allen wrench
Ladder
Use Screws (Part G, H, and K) to
secure the side rail in the upper
bunk with vertical ladder support
(Part 15), and the horizontal
ladder support (Part 16) with both
vertical ladder supports (Part 15)
and post.

Instructions
P.11
Step 6:
Ax28
x14
x14
Mattress Support Slat Set
Insert the slats into the slots in the mattress
side rails. Ensure there is a slat in every slot.
Secure each of the slats in the slots with screws
(Part A) to the assembled frame in step 5.

Instructions
P.12
Step 7:
O1
O2
1
2
2
M
O1
M
Drawers
Use the wooden connectors (Part M) and bolts (Part O) to combine
the side (Part 2) with the front board of the drawers (Part 1).
Phillips-head (Crosshead) screwdriver is required.

Instructions
P.13
Step 8:
1
2
2
6
O2
O1
E
Use the wooden connectors (Part E) and bolts (Part O) to secure the
underneath support (Part 6) with the front board of the drawer (Part 1).

1
2
6
4
4
Instructions
P.14
Step 9:
3
3
3
2
As the illustrated direction, slide the parts (Part 3 & 4) into the
assembled parts in step 2.
The order is Part 3, Part 4, Part 3, Part 4 and lastly Part 3.

1
2
3
3
3
4
4
P
P
P
P
1
2
Instructions
P.15
Step 10:
5
5
O2
O1
E
5
6
2
3
3
3
4
4
2
Combine the end part of the drawer (Part 5) to the assembled drawer
in step 9 with screws (Part O & P) and wooden connectors (Part E)

Instructions
P.16
Step 11:
25
6
Q
Q
N
Q
Q
N
Q
Q
N
Q
Q
N
Screw the wheels (Part N) into the all corners of drawer with Part Q.

Instructions
P.17
Step 12:
Repeat the steps above to assemble the other drawer
and put both drawers underneath the bunk bed.
Your bunk bed assembly is now
complete. Please review all
safety instructions.
Finish