Vulu Savannah HK SVHCOT User manual

Savannah Cot
HK SVHCOT
Read all instructions BEFORE assembly and USE
of product. KEEP INSTRUCTIONS FOR FUTURE USE

Congratulations on purchasing your
new Savannah cot
In under an hour you should be able to
assemble your new cot and it will be ready
to meet your beautiful child :)
1.

Warnings
s
afety considerations for your child.
•Follow the manufacturer’s assembly instructions in detail to ensure the safet
y
features of the cot are not compromised.
•ensure the cot is not placed too close to heaters, blinds, curtains, windows
or power points.
•do not hang anything nearby where there is a potential danger of the item
falling into the cot.
Keep cot free of any toys, cushions etc that could be used as a
foothold or present a danger of suffocation or strangulation.
•keep any medication, string, elastic, small toys or small items such as money
out of reach from any position in the cot. It is advisable to keep all items out
of your child’s cot to prevent suffocation or strangulation.
•To prevent falls, the base of the cot should be adjusted to the lowest
position before your child can sit up. To prevent falls or suffocation the
maximum mattress thickness should not exceed 130mm.
•
to ensure the safety of your cot, regularly check all the connecting bolts and
glide pins making sure they are tight.
R
ecommended Mattress Size.
•
This cot has been manufactured for use with a mattress which measures 760mm
(
wide) x 1310 mm (long) x 130 mm (maximum thickness). The width and length are
s
pecified because it is IMPORTANT that the gaps between the mattress and the sides
a
nd ends of the cot do not exceed 40 mm. This is to minimise the risk of a child’s limb
b
ecoming caught in the gap. The thickness of the mattress has been specified to
e
nsure that the depth of the cot is greater than 500 mm with the mattress base in
the lower position to minimise the risk of a child climbing or falling out of the cot.
This cot has been designed for a child up to 25kg
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
WARNING
AS/NZS 2172:2013 Cots for household use - Safety Requirements
2.

Hardware List
Please ensure you have all parts before proceeding to assembly
Single Bed Parts
(sold separately)
3.

Parts List
Small parts can present a choking hazard. Always keep small parts out of reach of
children both during and after assembly. Store any spare or unused parts in a safe place.
WARNING
4.

6
B
1
6
Attach corner posts to end panels
Attach the corner posts (B,C,D and E) to one
of the end panels (A).
Note how the corner posts are facing.
Secure the end panel at each end with four (1)
connector screws. Do not fully tighten the
screws yet.
Repeat this step for the other end panel.
Corner Post
End Panel
Attach side panels to end panel
Attach the side panel (F) to the assembled
ends. Secure the side panel at each end
with four (1) connector screws.
Do not fully tighten the screws yet.
Side Panel
5.

6
6
Attach the side panel (F) to the assembled
ends. Secure the side panel at each end
with four (1) connector screws.
Do not fully tighten the screws yet.
Attach side panels to end panel
Attaching the Base
Please note that the base has 2 levels.
The top level is to be used for newborns
and the lower level is to be use when the
toddler is able to sit up unassisted
Secure the base to the assembled side panel
and end panels at each end with the connector
screws (6). Tighten with the allen key (6)
Repeat for all 4 corners.
6.

6
IMPORTANT SAFETY STEP
Fit the (3)screws to the 4
remaining unused base
locating holes
on the side panels.
(2 on each side)
This is a required safety step
to prevent the entry of small
fingers into these holes.
Pluging unused holes
Assembled Cot
7.

6
6
2
I
1
Single Bed Assembly
Attach the corner (B,C,D and E) posts
to the end panel (A).
Note how the corner posts are
facing. This is the opposite of
the way for the cot.
Secure each post using the (1)
connector screws.
Tighten the screws
firmly.
Attaching the side rails to Ends
Attach the side rails (I and H) to the
assembled ends, using 8x(2) connector
screws.Tighten firmly.
(Sold separately)
8.

J
J
Attaching the Bed Rails
Attach the bed rails (J)to the assmbled
ends and side rails using 6x (6)
connector screws.
Attaching the slats to the base
Plug the open holes with
the (3) screws
Use the screws (5) to screw
in the slats as shown.
9.

The assembled Junior Bed.
10.

Care and Maintenance
All Vulu/love N Care products have one year warranty from the date of purchase.
It is recommended to regularly inspect and maintain movement of locking devices
and security of essential components.
Regularly check all parts for wear and tear.
Your furniture may be cleaned by wiping with a damp cloth and drying with a soft
clean cloth.
Do not use abrasives, bleach, alcohol or ammonia-based household polishes.
Take care when handling or moving the furniture. Careless handling may cause
damage.
Check the cot screws and locks to make sure they are all kept in good working
order.
If any of the parts are missing or broken you should contact the manufacturer and
discontinue using the cot until they are replaced.
WARRANTY AGAINST DEFECTS
All Vulu/Love N Care products are guaranteed for twelve months from the date
of purchase. Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. you are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. This covers
against faults which develop through faulty materials and workmanship.
Misuse, accidental damages,normal wear and tear or neglect are not covered.
If a fault becomes apparent, please return the item to the store of purchase with
your receipt. You must inform the store what the defect is. We will then arrange
for its repair or it will be assessed for replacement as expediently as possible.
The benefits of this warranty are in addition to other right and remedies under t
he law in relation to the goods or services to which this warranty relates.
If you are unable to return the item to the store of purchase, you can contact
Love N Care on free call 1300 732 599.
Where you send the product directly to the manufacturer then you may be
liable for the costs of transportation to and from Vulu/Love N Care. Love N Care
will meet the reasonable expenses incurred by a consumer in a making a
warranty claim. You can claim expenses incurred in making a claim by
contacting our customer service team on 1300 732 599 or by email
at [email protected]
11.

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us
BROUGHT TO YOU BY