New Classic Furniture HUDSON D3832-20 User manual

PARTS LIST
Assembly Instructions
MADE IN VIETNAM PAGE: 1 OF 2
NO.
A
COMPONENT
CUSHION
SEAT
SKETCH QTY.
2 PCS
B
CHAIR BACK
2 PCS
C FRONT LEG 4 PCS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Please read the instructions thoroughly before assembly.
NO.
1FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
HARDWARE LIST
COMPONENT SKETCH QTY.
22 PCS
222 PCS
NUT
5/16” DIA.
ALLEN
WRENCH
5/16” DIA.
3
6 PCS
4
8 PCS
LONG BOLT
1/4” x 3”
6
1 PC
SHORT BOLT
1/4” x 1 3/4”
5
8 PCS
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not tighten screws or bolts until the assembly is completed.
3. To level the chairs or table, before tightening all the screws, the chairs or table must be place on a flat
surface and then tighten the screws.
4.Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
ITEM NO.D3832-20
HUDSON DINING CHAIR
(2 PER CARTON)

MADE IN VIETNAM PAGE: 2 OF 2
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and
install the cushion seat.
STEP 2
Insert long bolts to secure the cushion seat.
STEP 3
Install the chair front legs once the cushion
seat is secured.
Assembly Instructions
21
5
4
B
A
1234
B
A
C
C
ITEM NO.D3832-20
HUDSON DINING CHAIR
(2 PER CARTON)
STEP 4
Complete.
4
2
1
6
B
A