New Classic Furniture PORTER D1503-21 User manual

1
This page lists all the contents included in the Box. Please take time to identify the
hardware as well as the individual components to this product. As you unpack and
prepare for assembly, place the contents on a carpeted or padded area to protect
them from damage.
C l e a n i n g & C a r e
Treat the surface with care, clean it
Do not use abrasive cleaners. Hardware may be loosen over time.
Periodically check that all connections are tight.
A Phillips screw driver is necessary for assembly.
ASSEMBLY INSTRUCTIONS
PORTER PARSON CHAIR
ITEM NO. D1503-21

2
GENERAL INFORMATION, TIPS & TRICKS
Do not put hot pots or objects which are more than
80 degrees celsius or 176 degrees fahrenheit
directly on the seat.
A Phillips screwdriver is necessary for assembly.
1. Please read the assembly instructions prior to assembling this product.
2. To avoid damages, assemble this product on a non-abrasive surface such as a carpet.
3. Make sure all bolts and nuts are tightly fastened before the product is used.
4. Not for commercial use.
5. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the
wood as needed. Avoid prolonged exposure to moisture.
Please make sure you have all parts before beginning assembly. Please wait
until all steps are completed before tightening bolts. We recommend two
people to assemble.

SIZE: 1/4" x 80mm
QTY:4 PCS
5. LONG BOLTS
QTY: 1 PC
SIZE: 5/16" x 19mm
A. Back Leg
CHAIR HARDWARE LIST
SIZE: 5/16"
CHAIR PART LIST
Front Legs (Left - Right)
QTY:1PC QTY: 2PCS
C.B. Seat Frame&Cushion Seat
3
2. SPRING WASHERS1. FLAT WASHERS
QTY:10PCS QTY:10PCS
3. SHORT BOLTS
6. ALLEN WRENCH
QTY: 1 PC
SIZE: 4 mm
SIZE: 1/4" x 40 mm
QTY: 2PCS
4. SHORT BOLTS
SIZE: 1/4" x 60 mm
QTY: 4PCS

4
CHAIR ASSEMBLY INSTRUCTIONS
Put the Seat Frame&Cushion Seat (B) and the Front Legs (C) upside down on the soft and smooth surface.
Attach Front Leg (C)into the holes of the Seat Frame (B) insert Short Bolt (4) Spring Washer (2) and Flat
Washer (1) , by using Allen Wrench (6).
Take the Allen Wrench, and turn the
bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolts.
STEP 1
STEP 2
B
C
C
1
2
4
6
Put the Back Leg (A) and the Seat Frame (B) upside down on the soft and smooth surface.
Then insert Long Bolts (5), Short Bolts (3), Spring Washers (2), and Flat Washers (1) into the predrilled holes
of each corner, by using Allen Wrench (6).
6
3
2
1
5
12
5
12
A

5
CHAIR ASSEMBLY INSTRUCTIONS
Printed in Vietnam
STEP 3
Turn the assembled chair to the upright position carefully. Make sure the chair is level, and then
securely tighten all bolts at this stage. Assembly is now completed.