New Classic Furniture ROYAL CLASSICS CONSTANTINE U532T-30 User manual

Created date: 10/10/2023
Revised date: 12/16/2023
PAGE 1/6
ASSEMBLY INSTRUCTIONS
CONSTANTINE COLLECTION
U532T-30 CONSTANTINE SOFA
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small
parts, which may have come loose inside the carton during shipment. Identify and count all items and
compare with the PARTS LIST and/or HARDWARE LIST shown below.
CAUTION: Read the instructions carefully before assembly.
1. We recommend that you assemble this product with the assistance of another person to eliminate
damage to the product during assembly.
2. When you want to reposition the product, please always “LIFT & MOVE”.
PARTS LIST
HARDWARE LIST
NO.
DESCRIPTION
SKETCH
Q’TY
(PCS)
NO.
DESCRIPTION
SKETCH
Q’TY
(PCS)
A
SEAT FRAME
1
1
FLAT
WASHER
Ø5/16 x 3/4’’
16
B
LEFT SIDE
FACING
(LSF) ARM
1
2
WASHER
Ø5/16 x 1/2’’
16
C
RIGHT SIDE
FACING
(RSF) ARM
1
3
BOLT
Ø5/16 x 2’’
4
D
BACKREST
1
4
ALLEN KEY
Ø5/16 x 3¼’’
1
E
SEAT
CUSHION
2
5
BOLT
Ø5/16 x 3¼’’
10
F
LEG
2
6
THREAD
BOLT
Ø5/16 x 3¼’’
2
G
SUPPORT
LEG
2
7
HEX NUT
Ø5/16 x 1/2’’
2
8
WRENCH
1/2’’ x 3½’’
1
9
SCREWS
D4 x 2¾’’
4

Created date: 10/10/2023
Revised date: 12/16/2023
PAGE 2/6
ASSEMBLY INSTRUCTIONS
CONSTANTINE COLLECTION
U532T-30 CONSTANTINE SOFA
STEP 1:
Place the seat frame (A) upside down. Assemble the legs (F) to both left and right back side of the seat
frame (A) by using the Allen Key (4) with hardware 1, 2, and 3.
STEP 2:
Lay the seat frame (A) on its backside to reach the holes to secure the bolts for the arms. Align and
assemble the LSF arm (B) and RSF arm (C) to the seat frame (A) by using the Allen Key (4) with
hardware 1, 2, and 5.

Created date: 10/10/2023
Revised date: 12/16/2023
PAGE 3/6
ASSEMBLY INSTRUCTIONS
CONSTANTINE COLLECTION
U532T-30 CONSTANTINE SOFA
STEP 3:
Assemble and secure the front legs of the LSF arm (B) and RSF arm (C) to the seat frame (A) by using
a screwdriver with hardware 9.
STEP 4:
Place the backrest (D) on its backside. Install the thread bolts (6) into the holes on the bottom of the
backrest (D) by using your hands to rotate the bolts about 25 mm into the backrest (D).

Created date: 10/10/2023
Revised date: 12/16/2023
PAGE 4/6
ASSEMBLY INSTRUCTIONS
CONSTANTINE COLLECTION
U532T-30 CONSTANTINE SOFA
STEP 5:
Place the frame up right and install the backrest (D) to the LSF arm (B) and RSF arm (C) by sliding the
brackets all the way until it is secured.
STEP 6:
Open the Velcro cover on the RSF arm (B) and LSF arm (C) to reach the holes to secure the bolts for
the backrest. Assemble the backrest (D) to the LSF and RSF arms (B & C) by using Allen Key (4) with
hardware 1, 2, and 5.

Created date: 10/10/2023
Revised date: 12/16/2023
PAGE 5/6
ASSEMBLY INSTRUCTIONS
CONSTANTINE COLLECTION
U532T-30 CONSTANTINE SOFA
STEP 7:
Place the chair on its back on a clean and soft surface to reach the thread bolts (6). Secure the backrest
(D) to the seat frame (A) by using the Wrench (8) with hardware 1,2, and 7.
STEP 8:
Screw the support legs (G) to the bottom of seat frame (A).