New Classic Furniture GIA D1701-160 User manual

PARTS LIST
Assembly Instructions
MADE IN VIETNAM PAGE: 1 OF 3
NO.
A
COMPONENT
CHAIR BACK
SKETCH QTY.
4 PCS
ITEM NO. D1701-160
GIA 60” RECTANGLE DINING TABLE
GIA DINING CHAIR (SET INCLUDES 4 CHAIRS)
B SEAT FRAME 4 PCS
DCUSHION
SEAT 4 PCS
C FRONT LEG 8 PCS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Please read the instructions thoroughly before assembly.
NO.
1FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
HARDWARE LIST
COMPONENT SKETCH QTY.
44 PCS
244 PCS
NUT
5/16” DIA.
ALLEN
WRENCH
5/16” DIA.
316 PCS
41 PC
LONG BOLT
1/4” x 3”
616 PCS
WOOD SCREW
#8 x 1 1/2”
724 PCS
SHORT BOLT
1/4” x 1 3/4”
512 PCS
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not tighten screws or bolts until the assembly is completed.
3. To level the chairs or table, before tightening all the screws, the chairs or table must be place on a flat
surface and then tighten the screws.
4.Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.

MADE IN VIETNAM PAGE: 2 OF 3
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and install
the seat frame.
5
6
4
4
2
2
1
3
4
2
1
C
C7
D
B
B
B
A
1
STEP 2
Insert long bolts to secure the seat frame.
STEP 3
Install the chair front legs once the seat frame is
secured.
STEP 4
Place the assembled seat frame on the cushion seat
and attach with wood screws.
B
A
Assembly Instructions
ITEM NO. D1701-160
GIA DINING CHAIR (SET INCLUDES 4 CHAIRS)
GIA 60” RECTANGLE DINING TABLE

A
B
B
B
B
Assembly Instructions
ITEM NO. D1701-160
GIA DINING CHAIR (SET INCLUDES 4 CHAIRS)
PARTS LIST HARDWARE LIST
NO.
1
COMPONENT
FLAT WASHER
5/16” DIA.
SKETCH QTY.
8 PCS
2SPRING WASHER
5/16” DIA. 8 PCS
3BOLT
5/16” x 65 MM 8 PCS
4ALLEN KEY
4 MM 1 PC
NO.
A
COMPONENT
TABLE TOP
SKETCH QTY.
1 PC
BTABLE LEG 4 PCS
To assemble the table, please follow the following
steps:
STEP 1: Install 4 of the table legs and tighten all
bolts.
1
2
3
4
MADE IN VIETNAM PAGE: 3 OF 3
UP DOWN
ADJUSTABLE
LEVELER
GIA 60” RECTANGLE DINING TABLE