New England Arbors Fairlawn 4 x 4 Raised Garden Bed User manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Posts (4)
2. Side Panels (4)
3. Post Caps (4)
4. Grid Slats (6)
5. 2 ½”Self-Auguring Stainless Steel Screws (16)
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e.shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Fairlawn 4 x 4 Raised Garden Bed
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
2
1
Ver 1.0/111714
www.newenglandarbors.com
4
48 in
3 in
11 in 12 7/8 in
48 in
44 1/8 in
44 1/8 in
48 in
10 7/8 in
10 7/8 in
3
Not to Scale
5
Note: Volume of Raised Garden Bed is ± 320 Liters or 11 ft³

3
2
STEP ONE
Insert boards into the posts as shown and fasten with 4 screws.
Repeat for all boards and posts.
Install post caps as shown.
Raised Garden Bed Assembly
1
2
1
2
3
Fairlawn 4x4 Raised Garden Bed Instructions

3605 32nd St., Building 3, Port Huron MI USA 48060
Toll Free Phone: [phone] Toll Free Fax: [phone]
www.newenglandarbors.com
3
3
STEP TWO
Assemble the grid slats as shown.
Ripup and add the packaging cardboard into the garden bed.
The cardboard will compost and help hold moisture in the garden
bed.
Fill your raised garden bed with soil to desired amount and level
the dirt.
Place the assembled grid slats on top of the soil.
Grid Assembly and Installation
1
2
1
3
4
4
2