New England Arbors Composite Garden Bed VA84063 User manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri.8:00 AM to 4:00 PM EST).
1. Posts (4)
2. Side Panels (8)
3. Post Caps (4)
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’for unobstructed assembling.
• You should not need to use excessive force when assembling components.
The 4x4 Composite Garden Bed
Please read through before starting assembly.
AS SEMBLY I NSTRUCTI ONS
1
2
1
Ver 2.0/DEC 2013
    
    
    
    
    
    
    
   
  
www.newenglandarbors.com
3

STEP T WO
Excavate four, 6-inch holes in a square pattern (46” x46”)
as shown aside. Holes are to be 12 inches deep.
Insert the Raised Bed assembly into the holes and replace
the excavated dirt back and around the posts.
The 4x4 Composite Garden Bed
Raised Bed Installation
1
3605 32nd St., Building 3, Port Huron MI USA 48060
Toll Free Phone: [phone] Toll Free Fax: [phone]
www.newenglandarbors.com
3
2
ST E P O NE
Insert boards into the posts as shown. The boards are tabbed and
will lock into place once fully inserted into the routed holes on the
posts.
Repeat for all boards.
Place a post cap onto the top of each post. The design of the post
cap allows them to be press-fitted into place.
Raised Bed Assembly
1
2
1
Mitered
Tabbed
23
12”
6
46”
46”
1
2
2