
New Holland
Forage Blower Specifications
F62B
Page 1 f 1
MODEL F62B
LENGTH 108 in. (2,743 mm)
WIDTH 100 in. (2,540 mm)
WEIGHT 1,605 lbs. (729 kg)
BLOWER
Blowing height* Over 100 ft. (Over 30 m)
Blower housing 60 in. dia. (1,524 mm)
Paddles (adjustable) 8
Paddle tip speed 8,460 ft./min. (2,579 m/min.)
Drive Direct P O
HOPPER
Diameter Auger–12 in. (305 mm)
Length Auger–50 in. (1,270 mm)
Width 37 in. (940 mm)
Height from ground Adjustable–201⁄2in. (520 mm)
to 271⁄8in. (699 mm)
Feeder type Auger
DRIVELINE PROTECTION Shearbolt
PTO 540 rpm
TIRES 4.80–8 “C” load range
CAPACITY (with adequate power)
Corn silage* Up to 180 tons/hr. (163 mt/hr.)
Haylage* Up to 110 tons/hr. (100 mt/hr.)
OPTIONAL EQUIPMENT Pipe Clamp
Kwik Pipe Bundle
elescoping Pipe Section
Hinged Deflector
Safety ow Chain+
* Capacity and height will depend upon tractor horsepower, type of crop, moisture content, length of cut, as well as general maintenance of pipes and spout.
+ Available from New Holland Service Parts.
Safety begins with a th r ugh understanding f
the equipment. Always make sure y u and
y ur perat rs read the Operat r’s Manual
bef re using the equipment. Pay cl se
attenti n t all safety and perating
decals and never perate machinery
with ut all shields, pr tective devices
and structures in place.
Design, materials and/ r specificati ns are subject t
change with ut n tice and with ut liability theref r.
Specificati ns are applicable t units s ld in Canada, the
United States, its territ ries and p ssessi ns, and may
var y utside these areas.
© 2008 CNH America LLC
New H lland is a registered trademark f CNH America LLC.
Visit ur Web site at www.newholland.com/na. Or, call t ll-free 866-NEW-HLND (866-639-4563).