Configuring for use
When you inserted the1. MAXPower 802.11g/b
USB 2.0 Adapter into a USB 2.0 port, the
Wireless Utility should have opened
automatically. If it did not, or you quit the program, you can
find it in your Applications folder.
Once the Wireless Utility window is active, click on the “Site2.
Survey” tab. You should see your wireless network listed
here. If you don’t, click “Rescan”. If your network still doesn’t
appear, consult your wireless router’s manual or technical
support.
Even though the
configuration utility
may open immediately
after installation, you
must perform these steps
as listed in order for your
Adapter to work properly.
Wireless Configuration
Before configuring:
Insert the1. MAXPower 802.11g/b USB 2.0 Adapter into an
open USB 2.0 port. The Wireless Utility should open auto-
matically. You can just ignore it for the time being.
Go to the “Apple” menu and select “System Preferences”.2.
Click on the “Network” preference pane icon.3.
The “Detected a new Network port” dialog should pop up.4.
Click “OK”.
Click “Apply” and close System Preferences.5.
