Second step：
Go to the “Quick Settings”
(1) SSID configuration, the user can customize the SSID, easy to use
and memory.
(2) WiFi password settings, the user can customize the WiFi encryption
mode, and set their own password to prevent others from stealing the
traffic and to protect the security of the account.
(3) Preview the contents of the configuration, confirm is correct and
click on the “aplicar”.
4、Package Contents
1 x ME50N 4G wireless Terminal 1 x Power Adaptor
1 x LAN Port Cable (RJ45) 1 x ME50N User Manual
1 x External Antenna
5、Precautions
(1) When you remove and insert the SIM card, please ensure the
device without power.
(2) Do not use the equipment in case of lightning weather and
unplug the external antenna and power adapter.
(3) If the device working fine, you’d better not change the
parameter or other function, if you changed it and cannot access
Internet or have poor experience, please press and hold the reset
button for more than 7 seconds to restore the factory settings.
6、Common faults and treatment methods
Common faults Treatment methods
The device is powered on
but the front panel power
light is off.
Check the line connection is correct,
the outlet is energized, and the power
adapter is consistent with the
nameplate power supply.
Computer local connection
is not displayed, cannot
successfully PING IP
address of the device,
cannot open the WEB
page.
Check if the computer's network card
is up and the computer has obtained
the IP address. The computer is best
set to automatically obtain IP (DHCP
need to open the device, the default is
open), if it is manually set, make sure
that the set IP address and the device
in the same network segment.
The device is working but
cannot access the internet
through the web
Set the computer to automatically
obtain the IP address and DNS server
address.
Change admin page login
password or SSID
password, but forget
password
Long press the reset button for more
than 7 seconds to restore the factory
settings, and then from the rear body
nameplate for relevant information.
7、FCC Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
