Newport Integrity VCS User manual

1
Integrity VCSTM Accessories Quick Set up Guide
Thank you for your purchase of Integrity VCS from Newport Corporation. You can find more product set-up
information on Newport’s YouTube Channel. Search “Integrity VCS” on YouTube to start, or scan the QR code below:
Integrity Shelf Installation
The Integrity overhead shelf can attach at three
distinct locations (only one for 3 ft. 900mm version)
along the depth of the INT frame. Determine your
desired location based upon clearance and
accessibility needs and inspect those mounting holes
prior to installation.
1. Position the vertical supports in front of the
mounting-hole location and use fasteners to
install the supports to frame. At this point,
install but do not fully tighten down.
2. Have a colleague assist with lifting the shelf
assembly into position and attachment
hardware to fasten shelf to the uprights.
Make sure all connections are secure by
tightening down the bolts.

2
Integrity Power Strip Kit Installation
For INT-PS-CN, US, IT, IL, IN, UK and JP, Follow the
instruction below:
1. Attach the power strip to the bracket using
two slotted mounting holes on the back of
the power strip.
2. Attach the mounting bracket to the desired
location on the Integrity VCS overhead shelf.
Tighten screws under the bracket to secure
the bracket to the shelf.
For INT-PS-FR and DE, Follow the instruction below:
1. Attach the power strip using 4 screws/lock
washers through the slotted mounting holes
on the sides.
2. Attach the mounting bracket to the desired
location on the Integrity VCS overhead shelf.
Tighten screws under the bracket to secure
the bracket to the shelf.

3
Integrity Caster Kit Installation
Bottom View of table:
1. Adjust the leveling feet so that the caster can fit underneath the frame
2. Bolt the casters underneath the frame on the sides. Check to make sure all the connections are secure.
Readjust leveling feet height if needed.
If you need more information, please contact [email protected], or call [phone].