Nexo GPT-SSBRK User manual

- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 1 OF 3
GPT-SSBRK
DP1734/Rev01a - DI S12
Pole Stand Bracket for 1 GEOS12
GPT-SSBRK + VNT-STDPS GPT-SSBRK + VNT-TCBRK GPT-SSBRK + VNT-XHBRK
Contents:
x2 Side Part
x1 Yoke
x2
x2 Plastic Washer
Weight: 7.5 kg / 16.5 lb

- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 2 OF 3
Dimensions:
Procedure of Assembly
Slide side parts into GEO S12
connecting plate oblong holes.
Lock safety pins into GEO S12
connecting plate.
Screw 2 levers, with Plastic washers.

- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 3 OF 3
SSBRK with wind up
SSBRK with XHBRK
SSBRK with TCBRK
WARNING:
-Wind Up stand must be rated for assembly weight (50kg rated load min).
-Wind Up stand must always be installed on a horizontal surface.
-Stand height and footprint must be defined to prevent assembly from collapsing.
-Ensure that public is not allowed within a safety area within a radius that is equal or higher than the assembly
height.
•NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
•Please check the web site nexo-sa.com for the latest update.