CORSICA VESSEL FIREPLACE
655731
Assembly instructions
Warnings The appliance must be positioned so that the plug is
We suggest you retain these instructions for future reference. accessible. If you choose to chase the wire into the wall or
cosmetic reasons and or to install the fire using a fuse spur
Unwrap all packaging materials and place the components connection then the manufacturer cannot be held liable for any
on top of the carton box or on a clean floor to prevent it from charges arising from future decorative or re-installation costs
scratching. should the fire require to be exchanged at a future date.
This product should only be used on firm, level ground. This heater should not be used in a dusty environment.
keep small parts out of reach of children.
Suites are designed to be freestanding and should not be The appliance MUST be earthed.
permanently secured or sealed to the wall. The appliance MUST NOT be situated directly below a fixed
Read all instructions before using this heater. When using socket outlet.
an electrical heating appliance basic precautions should
always be followed to reduce the risk of fire, electric shock, Check the voltage requirement of the fire accords with the
and injury to persons, including the following: local supply voltage.
This heater is hot when in use. To avoid burns, do not let bare If the moulded plug is removed it should be disposed of with
skin touch hot surfaces. Keep combustible materials such as the fuse removed, as there is a risk of electrical shock if
furniture, pillows, bedding, papers, clothes, and curtains at inserted into another socket outlet.
least 1 metre from the front of the heater and keep them
away from the sides and rear. If the power cord needs to be changed, it can be accessed
through the mains access cover. This work should only be
Extreme caution is necessary when any heater is used by or done by a qualified electrician.
near children or invalids and whenever the heater is left
operating and unattended. The guard is to reduce the risk of Do's
fire or injury from burns and no part of it should be We suggest you spend a short time reading through this
permanently removed. It does not give full protection for leaflet before you start.
children or the infirm. When you are ready to start make sure that you have the
Always unplug the heater when not in use. To disconnect right tools, plenty of space and a clean, dry area for assembly.
heater, turn controls to off, then remove the plug from the
socket. Check the pack and make sure you have all the parts listed.
Connect to properly earthed sockets only. The earth should During assembly children should be kept away from the
comply with current IEE regulations. product due to possible risk of injury.
Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire, assembled in the room intended for use.
electric shock, or injury to persons. Ensure that this product is fully assembled as illustrated
Avoid the use of an extension power cord because this may before use.
overheat and become a fire hazard. If an extension cord must
be used it should be a 13A extension cord. Check all screws or bolts are tightened and inspect regularly.
Produced in China for Next Retail Ltd.
655731-2014-V1