Nexxt Solutions SmartWi-Fi home security Starter kit User manual

SmartWi-Fi home security
WARRANTY
nexxtsolutions.com/warranty
YEAR
2
Starter kit

User guide
Thank you for purchasing the Smart Wi-Fi home security
starter kit from Nexxt Solutions. We are excited to be part
of making your life easier, safer and for bringing peace of
mind into your home.
Product overview
Siren
1. Reset button: for Wi-Fi connection. Press and hold for 5
seconds to reset the siren if the backlight is not blinking.
3
2
1
Motion sensor
1. Reset button: for Bluetooth® connection. Press and hold
for 5 seconds to enable the pairing mode in the device.
2. Status LED
Blinking light: the device is in pairing mode.
Steady light: the device is successfully paired.
2. Status LED
Blinking light (red and green): the device is in
pairing mode.
Steady light (red): the device is successfully paired.
3. Backlight
Blinking backlight: the device is in pairing mode.
Steady light: night light mode is enabled.
English
2
1

Installing Nexxt Solutions
Home App
Download Nexxt Home app
from Google Play Store or Apple App Store.
Package content
• Siren
• One motion sensor
• Two contact sensors
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
GET
Accvent LLC
Login with existing account
Create New Account
SOLUTIONS
Iniciarsesión con cuenta existente
Crear Cuenta Nueva
SOLUTIONS
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
INSTALL
Accvent LLC
Contact sensor
1. Reset button: for Bluetooth® connection. Press and hold
for 5 seconds to enable the pairing mode in the device.
2. Status LED
Blinking light: the device is in pairing mode.
Steady light: the device is successfully paired.
2
1

Step 2
Enter the verication code you received.
Step 1
Register by email. If you want to register by phone (US
only), select Register by phone on the upper right-hand
corner of the screen.
60 %
9:41 AM
Register by phone
Register by email
United States of America
Email
Get authentication code
60 %
9:41 AM
Enter verication code
Verication code has been sent to your

Step 4
The Nexxt Solutions Home App account has been
successfully set up.
Step 3
Create a new password and then select Completed.
60 %
9:41 AM
Set Password
Completed
6-20 characters, including letters and numbers

Step 5
Assign a Home Name and Family Location.
Select Add another room and name each room as needed.
Select Save to store your settings.
Installation
Plug in siren to any standard wall outlet.
Peel the adhesive tape from the back of the motion sensor.
Firmly press the sensor against the wall or area you want to
secure.
Peel the adhesive tape from the back of the contact
sensors and magnetic contacts. Firmly press the sensor
against the frame and press the magnetic contact against
the window or door you want to secure.

Step 2
The Bluetooth® process between siren and app starts
automatically. Once device is detected, click on Add.
Enter your Wi-Fi password and click on Conrm. Make sure
to use your correct W-Fi password, otherwise the siren will
not connect.
Add device
Step 1
Select Add device, followed by the siren. A blinking
red/green LED means that the siren is ready to be paired to
the Nexxt solution Home App. Otherwise, hold down the
reset button for 8 seconds. Select Conrm.

Step 4
To add the motion sensor and door sensor, follow the same
installation steps as the siren.
Step 3
To rename the device, click on pencil icon followed by
Conrm. Click on Completed when done.

Siren settings
Turn on/o light: Turns the siren LED backlight on
and o.
Record: Will save information received from each
sensor connected to the alarm, every time movement
is detected.
Start Watching: Enables the audible alarm every time
an event is detected by the sensors.
Timer: Schedule when you would like to enable
Home Mode, Leaving Mode, or turn o the Alarm.
Speaker: This turns o the voice prompts for the
motion or contact sensors.

To select the monitoring mode, go to Start Watching and
congure the parameters according to your needs.
Home Mode: This will enable the motion and/or contact
sensors. But no siren will be triggered. To stop the alarm,
the user must disable it from the app.
Leaving mode: Arms the entire home. Alarm will be
triggered and also will sound continuously when motion
and/or contact sensors detect an event. To stop the alarm,
the user must disable it from the application.
Home Mode
Leaving Mode

Device name
It allows the user to rename the device. click on Save when
done.
Settings

Share device
Additional users will need their own Nexxt Home Account.
Once created, they are required to login to their own
account and join the Family. Then the newly added
members will have access to the siren and sensors.

To remove a family member, go to Prole, Family
Management, select the Family (Nexxt), followed by the
family member you wish to remove (Test).
Select Remove Member . When a conrmation popup
comes up, click on
Conrm .

Firmware information
Check for rmware updates: We will sometimes add new
features or provide updates with a new
rmware upgrade.
Device information
This menu will display information about the product.

Nexxt Solutions® is a registered trademark. All rights reserved. The
Bluetooth® word mark is owned by Bluetooth SIG, Inc. All other brand
names and trademarks are the property of their respective owners.
Made in China.
Notes

Español
Guía del usuario
Gracias por adquirir el Kit de seguridad inteligente con
conexión Wi-Fi de Nexxt Solutions. Nos complace ser parte
de la solución destinada no sólo a simplicar su vida, sino
que además poder brindar mayor seguridad y tranquilidad
al interior de su hogar.
Descripción del producto
Sirena
1. Botón de reposición: se utiliza para establecer la
conexión Wi-Fi. Mantenga presionado por 5 segundos
para reiniciar la sirena en caso de no iluminarse la luz de
fondo en forma intermitente.
Sensor de movimiento
1. Botón de reposición: se utiliza para establecer la
conexión Bluetooth®. Mantenga presionado por 5
segundos para iniciar el proceso de emparejamiento en
el dispositivo.
2. LED de estado
Luz intermitente: signica que el dispositivo ha pasado
al modo de emparejamiento.
2. LED de estado
Luz intermitente (roja y verde): signica que el
dispositivo ha iniciado el proceso de emparejamiento.
Luz permanente (roja): el dispositivo ha concluido el
proceso de emparejamiento satisfactoriamente.
3. Luz de fondo
Luz de fondo intermitente: signica que el dispositivo
ha iniciado el modo de emparejamiento.
Luz permanente: el modo de iluminación nocturna ha
sido habilitado.
2
1
3
2
1

Instalación de la aplicación
Nexxt Solutions Home App
Descargue directamente la aplicación
Nexxt Home de Google Play Store o de Apple App Store.
Contenido del empaque
• Sirena
• Un sensor de movimiento
• Dos sensores de contacto
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
GET
Accvent LLC
Login with existing account
Create New Account
SOLUTIONS
Iniciarsesión con cuenta existente
Crear Cuenta Nueva
SOLUTIONS
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
INSTALL
Accvent LLC
Luz permanente: el dispositivo se ha emparejado
exitosamente.
Sensor de contacto
1. Botón de reposición: se utiliza para establecer la
conexión Bluetooth®. Mantenga presionado por 5
segundos para iniciar el proceso de emparejamiento en
el dispositivo.
2. LED de estado
Luz intermitente: signica que el dispositivo ha pasado
al modo de emparejamiento.
Luz permanente: el dispositivo se ha emparejado
exitosamente.
2
1

Paso 2
Ingrese el código de vericación que recibió.
Paso 1
Registro por email. Si desea registrarse por teléfono (EE.
UU. solamente), seleccione Registro por teléfono en el
borde superior derecho de la pantalla.
60 %
9:41 AM
Register by phone
Register by email
United States of America
Email
Get authentication code
60 %
9:41 AM
Enter verication code
Verication code has been sent to your

Paso 3
Cree una contraseña nueva y seleccione Completo a
continuación.
60 %
9:41 AM
Set Password
Completed
6-20 characters, including letters and numbers
Paso 4
La cuenta Nexxt Solutions Home ha sido creada
satisfactoriamente.

Paso 5
Asigne un Nombre a la casa y la Ubicación del dispositivo
en su interior. Seleccione Agregar otra habitación e
identique los puntos de instalación respectivos. Seleccione
Guardar para almacenar sus parámetros.
Instalación
Conecte la sirena en cualquier tomacorriente estándar
de pared.
Retire la cinta adhesiva de la parte posterior del sensor de
movimiento. Presione el sensor rmemente contra la pared
o área que desea monitorear.
Retire la cinta adhesiva de la parte posterior de los sensores
de contacto. Presione rmemente el sensor contra el marco.
Repita el mismo procedimiento para instalar el contacto
magnético en la ventana o puerta que desea monitorear.