NICESKY Model FOCKE WULF FW-190 User manual

FW-190
Shenzhen NICESKY Model Co., Ltd.
FOCKE WULF

【FW190】
plane
* Featured 3 blade propeller to enhance scale realism.
* Combination of static model and dynamic airplane.
* Scale and vivid details are recreated with panel lines,
machine guns and air intake.
* Easy to assemble and excellent dynamic performance.
* Almost fully pre-assembled with finished color scheme.
* Hard surface of the lightweight fuselage design realized
its dynamic flight performance.
Length:595mm
Wing span: 680mm
Flying weigth: 270g
Motor:2000KV brushless motor
ESC:12A
Transmitter:4CH
Receiver:micro 4CH
Servo:9g X 3
Battery: 7.4V 650~850MAH 15-20C LI-PO

6.Do not attempt to catch plane while flying.
please do not touch the propeller.
【FW190】

Fw190
50mm
1. Please connect the fuselage and the main wing as the
picture below. Then using the screw to fix the bottom of the
main wing.
1
2
3
2
3
1
Man wing
Fuselage
Accessory
The CG is located in the back awa y
from the leading edge of the ma in
wing for 50mm.
Instruction of Assembly for the plane.
【FW190】

2 Please install the electronics and adjust well. Close the canopy.
The installation is finished till now.
Advice:the best adjustment angle for first flying!
Aileron: minus 6 degree to 6 degree
Rudder: minus 8 degree to 8 degree
Elevator: minus 10 degree to 10 degree
【FW190】

【FW190】

it
it
【FW190】

Shenzhen NICESKY Model Co., Ltd.
www.nicesky.net