NICESKY HURRICAN User manual

HURRICANE
Shenzhen NICESKY Model Co., Ltd.

【HURRICANE】
* Featured 3 blade propeller to enhance scale realism.
* Combination of static model and dynamic airplane.
* Scale and vivid details are recreated with panel lines,
machine guns and air intake.
* Easy to assemble and excellent dynamic performance.
* Almost fully pre-assembled with finished color scheme.
* Hard surface of the lightweight fuselage design realized
its dynamic flight performance.
Length:555mm
Wing span: 700mm
Flying weigth: 310g
Motor:2400KV brushless motor
ESC:20A
Transmitter:4CH
Receiver:micro 4CH
Servo:9g X 3
Battery: 7.4V 650~850MAH 15-20C LI-PO
Thank you for purchasing an innovative product designed for hobby enthusiasts.
The HURRICAN integrates the use of a radio transmitter, a speed controller, an
electronic motor and electronic servos providing longtime enjoyment. We’ll have
a specific instruction about this

【HURRICANE】
6.Do not attempt to catch plane while flying.
please do not touch the propeller.

【HURRICANE】
HURRICANE
50mm
1. Please connect the fuselage and the main wing as the
picture below. Then using the screw to fix the bottom of the
main wing.
The CG is located in the back awa y
from the leading edge of the ma in
wing for 50mm.
Instruction of Assembly for the plane.
1
2
3
4
2
3
4
1
Man wing
Fuselage
Stand set
Spare parts

【HURRICANE】
2 Please glue and foam to the slot of main wing..
3 Please install the electronics and adjust well. Close the canopy.
The installation is finished till now.
Advice:the best adjustment angle for first flying!
Aileron: minus 6 degree to 6 degree
Rudder: minus 8 degree to 8 degree
Elevator: minus 10 degree to 10 degree

【HURRICANE】

【HURRICANE】
it
it

Shenzhen NICESKY Model Co., Ltd.
www.nicesky.net