Calico Craft Parts GARGOYLE User manual

Page 1 of 5
ASSEMBLY INSTRUCTIONS – GARGOYLE
HINTS & TIPS
Always use a good quality wood glue. You may find low tack masking tape
useful to hold things together while drying. Make sure you wipe away any glue
oozes immediately with a damp cloth.

Page 2 of 5
PARTS LIST
Your kit will arrive with all the parts on sheets – you can paint/roller the parts
before assembly if required but ensure you don’t get any in the joints/areas to
be glued as this will make assembly more difficult. It can help to mask these
areas off prior to painting.

Page 3 of 5

Attach the 2 body sides to the main spine/tail piece ensuring that all
the slots line up
 Insert the 2 small shoulder/neck pieces onto which you’ll attach the
skull
 Attach the 2 skull pieces so the nose joins at the front and flares out to
the shoulder/neck joint
 Slot in the body struts where indicated in the correct order

Page 4 of 5
 Layer the front and back leg pieces
 Attach foot and claw pieces to the front legs
 Attach leg pieces to the main body struts

Page 5 of 5
 Glue wing pieces together
 Attach wing mounts to shoulder slots on the main body
 Attach wings to shoulder mounts