Nikon Coolpix L100 Operating instructions

作成承認印 配布許可印
Copyright ｃ 2009 by Nikon Corporation.
All Rights Reserved.
無断転載を禁ず !!
Printed in Japan March 2009
VMA43007-R.3780.A
VMA43007(BLACK)
REPAIR MANUAL
Ｍ
サービス
計画課
INC

VMA43007-R.3780.A
- L100 -
Contents
Disassembly
Warning󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D1
Rear cover 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D2-D3
Battery cover 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D3
LCD unit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D4
Discharge of main condenser󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D4
LCD holder󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D5
Tripod base󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D5
Front cover 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D6-D8
Microphone 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D8
Battery holder󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D9-D12
Release button unit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D13
Main PCB󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D14
Lens unit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D15
Speaker󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D15-D16
Inner holder 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D17
LED PCB 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D17
Flash unit 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 D18-D21
Assembly
Flash unit 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A1-A5
LED PCB 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A6
Lens unit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A6-A7
Inner holder 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A8
Speaker󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A8-A9
Main PCB󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A10
Release button unit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A11
Battery holder󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A11-A14
Microphone 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A15
Front cover 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A15-A17
Tripod base󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A18
LCD holder󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A18
LCD unit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A19
Battery cover 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A19
Rear cover 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A20-A21
INC

VMA43007-R.3780.A
- L100 -
Adjustment󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 A22-A40
Description of circuit󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E1-E8
Electricity
Overall wiring 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E9
CP1(DMA)circuit diagram󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E10
CP1(CAA)circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E11
CP1(PWA)circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E12
CP1(STA)circuit diagram󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E13
CP1(SYA)circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E14
CP1(TCA)circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E15
ST1 circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E16
TB1 circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E17
TB2 circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E18
TB3 circuit diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E19
CA1 circuit diagram󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E20
Overall block diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E21
CCD block diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E22
Lens block diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E23
ASIC block diagram󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E24
System control block diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E25
Power block diagram 󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E26
Fuse arrangement󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐E27
Inspection standards󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐 R1-R9
Tool list󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐T1-T3
Screw sheet󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐󲧐S1
INC

VMA43007-R.3780.A
-D1 ･ L100-
Disassembly
WARNING
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual after you remove the cover.
!
Points to notice for Lead-free solder products
・Lead-free solder is used for this product.
・For soldering work, the special solder and soldering iron are required.
・Do not mix the lead-free solder with the conventional solder.
・Use the special soldering iron respectively for lead-free solder and lead solder. They cannot be used in
common.
Note : ①Before disassembling, remove the SD card and battery.
②When disassembling, make sure to memorize the processing state of wires, screws to be
xed and their types, etc.
③Because electrical parts are easily damaged by static electricity, make sure that you are
well earthed/grounded.
INC

VMA43007-R.3780.A
-D ･ L100-
・Raise the flash unit (pop-up), and take out the two screws (#203).
・Take out the screw (#203).
・Open the USB cover (#103), and take out the screw (#202).
・Take out the four screws (#201) and two screws (#202)
#203
#201
#202
#201
#203
#202
#103
Rear cover
INC

VMA43007-R.3780.A
-D ･ L100-
・Remove the rear cover.
・Remove the double-stick tape (#127) and then the monitor cover (#128) from the rear cover (#126).
・Take out the two screws (#203) and two screws (#204).
#203
#204
#126
#127
#128
・Pull out the shaft (#102) upward.
・Remove the battery cover (#101).
#102
#101
Battery cover
INC

VMA43007-R.3780.A
-D ･ L100-
・Place the terminals of the discharger on the solders of the wires [Red and Black] and discharge the main
condenser. 2K Ω/5W
・Remove the LCD unit (#125). (When removing this, be careful NOT to touch the condenser wire.)
Condenser wire
#125
LCD unit
Discharge of main condenser
WARNING
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual after you remove the cover.
!
INC

VMA43007-R.3780.A
-D ･ L100-
・Take out the screw (#206).
・Remove the GND plate (#106).
・Take out the two screws (#203) and screw (#207).
・Remove the LCD holder (#105).
#206
#106
#105
#203
#207
#203
・Remove the tripod base (#104).
#104
LCD holder
Tripod base
INC

VMA43007-R.3780.A
-D ･ L100-
[Red/Black]
・Disconnect the FPC from the release button unit (#132).
・Remove the two soldering bridges.
・Unsolder the wires ([Red], [Black], [Gray], and [White]).
・Remove the adhesive (C-8008B) from the wires ([Gray], [White], [Black], and [Brown]).
・Unsolder the wires ([Gray], [White], [Black], and [Brown]).
・Unsolder the wires ([Red] and [Black]).
・Unsolder the wires ([Gray], [Black], [White], and [Red]).
・Take out the two screws (#205).
Soldering bridges
[Gray/White/Black/Brown]
[Red/Black/Gray/White]
#205
[Gray/Black/White/Red]
Front cover
#205
Adhesive : C-8008B
INC

VMA43007-R.3780.A
-D ･ L100-
・Take out the two screws (#205).
・Raise the flash unit (pop-up), and remove it upward.
・Separate the front cover and the lens unit a little, and remove the USB cover (#103).
・Remove the microphone (#131) wires ([Gray] and [Black]) from the guide.
#205
#103
[Gray/Black]
INC

VMA43007-R.3780.A
-D ･ L100-
・Remove the front cover as below.
・Remove the microphone (#131).
#131
Microphone
INC

VMA43007-R.3780.A
-D ･ L100-
・Take out the screw (#203).
・Remove the wires ([Red] and [Black]) from the
guide.
#203
Guide
[Red/Black]
・Remove the battery holder.
Battery holder
INC

VMA43007-R.3780.A
-D10 ･ L100-
・Remove the condenser unit (#144).
・Peel off the double stick tape (#145).
#144
・Unsolder the battery contact PCB (#153).
・Take out the three screws (#206).
・Remove the battery contact PCB (#153). (When removing this, be careful of the below hook.)
・Take out the two screws (#203).
#203
Unsolder here.
#206
#145
#206 #153 Hook
INC

VMA43007-R.3780.A
-D11 ･ L100-
・Remove the holder strap (#150).
#150
・Unhook at two places.
Unhook here.
INC

VMA43007-R.3780.A
-D1 ･ L100-
・Remove the battery holder C (#146) from the battery holder A (#154).
・Unhook the battery holder B (#151), and remove it in the same way.
#154 #151
#146
#149
#152
#154
#151
・Remove the two battery contacts A (#152) from the battery holder A (#154).
・Remove the two battery contacts B (#149) from the battery holder B (#151).
INC

VMA43007-R.3780.A
-D1 ･ L100-
・Take out the screw (#209).
・Remove the release button unit (#132) from the front cover (#129).
#209
#129
#132
Release button unit
INC

VMA43007-R.3780.A
-D1 ･ L100-
・Disconnect the three FPCs.
・Take out the two screws (#206) and (#207).
・Remove the main PCB (#142).
・Disconnect the FPC from the lens barrel side.
#206
#207
#142
Main PCB
INC

VMA43007-R.3780.A
-D1 ･ L100-
・Unhook at two places.
・Remove the speaker unit.
Speaker unit
Caution: Be careful NEITHER to touch the whole area of the back (see below left picture) because there
is the CCD stage on it, NOR to touch the extension area of the lens (see below right picture).
Lens unit
Speaker
Unhook here.
INC

VMA43007-R.3780.A
-D1 ･ L100-
・Take out the two screws (#211).
・Remove the speaker unit from the speaker holder (#139) .
#211
・Peel off the spacer (#138).
・Remove the speaker (#137) and holder strap (#136) from the speaker cover (#135).
#139
#135
#137
#136
#138
INC

VMA43007-R.3780.A
-D1 ･ L100-
・While holding the inner holder (#133), take out the three
screws (#212).
・Remove the inner holder (#133) from the lens unit (#140).
・Remove the three washers (#141).
・Take out the screw (#210).
・Remove the LED PCB (#134).
#140
#133
#141
#141
#141
#210
#134
#212
#212
#212
#133
Inner holder
LED PCB
INC