Observe caution when handling
the battery
The battery may leak or explode if
improperly handled. Observe tile
following precautions when handling
tile battery for use in this product:
• Before replacing tile battery, turn tile
product off. If you are using tile
Charging AC AdaptetiAC adapter] be
sure it is unplugged.
• Useonlya Rechargeable Li ion
Battery EN EL5 (su ppJied). Charge tile
battery by inserting it into tile
camera and connecting tile
Charging AC Adapter EH 68P/EH 68P
(AR) (supplied).
• When inserting the battery, do not
attempt to insert it upsidedown or
backwards.
• Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to
water.
• Replace the terminal coverwhen
transporting the battery. Do not
transport or store with metal objects
such as necklaces or hairpins.
• The battery is prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• Discontinue use immediately should
you notice any change in the battery,
such as discoloration or deformation.
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty of
wateK
/_ Observe the following precautions
when handling the Charging AC
Adapter
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near tile metal parts of
tile plug should be removed with a
dry cloth. Continued use could result
in fire.
• Do not handJethe plug orgo near
tile Charging AC Adapter during
lightning storms. Failure to observe
this precaution could result in
electric shock.
• Do not damage, modify, forcibly tug
or bend the USB cable, place it under
heavy objects, or expose it to heat or
flames. Should tile insulation be
damaged and tile wires become
exposed, take it to a Nikon
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
• Do not handJethe plug orCharging
AC Adapter with wet hands. Failure
to observe this precaution could
result in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC
to AC inverters. Failure to observe
this precaution could damage tile
product or cause overheating or fire. ifl