Niles HDL-4 User manual

Installing the
HDL-4 RMP, HDL-6 RMP
Niles Audio Corporation 12331 S.W. 130th Street Miami, Florida 33186 Tel: [phone] Fax: [phone]
© 1999 Niles Audio Corporation. All rights reserved. Because Niles constantly strives to improve the quality of its products, Niles reserves the right to change product
specifications without notice. Niles and the Niles logo are registered trademarks of Niles Audio Corporation. Printed in the USA 7/96 DS00173A
www.nilesaudio.com
Step 1
CAUTION! Before removing top
cover disconnect the speaker
selector to the amplifier/receiver.
A: Remove the screws from the top
and sides of the chassis
B: Remove the top cover A
A
A
A
A
B
A
Step 2
C: Remove the screws from the
bottom of the front panel and
detach from the chassis
C
CC
C
Step 3
D: Secure the rack mount panel to the
chassis replacing the screws at the
bottom of the panel
D
D
D
D
Step 4
E: Return the top cover to the unit
F: Replace the top cover screws
F
F
F
F
F
E
F