nimble Champ Series User manual

Champ Series
Customer Service:
Web - gonimble.com/support
Email - [email protected]

nimble Champ Portable Chargers
LED Charge Indicator:
Click Power Button once. Up to 4 white LEDs will illuminate to
show charging status and current battery level.
Note: A green LED indicates Power Delivery (PD) or Quick
Charge (QC) mode when charging a compatible device or
recharging the Champ battery.
Turn Charger On & Start Charging:
Connect your device to begin charging automatically. One
click will wake up the battery and start charging if Champ is
in sleep mode.
Turn Charger O & Stop Charging:
Stop charging by disconnecting your device or double click
the Power Button to enter sleep mode. Champ will enter sleep
mode automatically after the device is fully charged or
disconnected for 30~40sec. Champ will also enter sleep
mode if a cable is connected but no chargeable device
is detected.
Recharging the Champ Battery:
Connect the included cable to a power source like a Nimble
USB Wall Charger and then insert the Type-C connector into
the battery’s USB-C port. From 0%, Champ will take 2-3 hours
to recharge. You can recharge the Champ battery using the
USB-C Input while charging a device via USB-A Output.
Trickle Charge Mode:
Press and hold Power Button for 3 seconds to start Trickle
Charging. Ideal for small devices like wearables and
wireless headphones.

Warranty:
This product is under warranty for 2 years from the original
date of purchase. Keep your proof of purchase.
Safety First:
Overcharge & temperature protection prevents overheating
and manages charging voltage in extreme environments.
Important Care Instructions:
Stop using this product if it becomes damaged. Never dispose
of batteries in the garbage. Bring worn out batteries to your
local battery recycling center or return to Nimble for
responsible reclamation.
Clean the product using a dry cloth. Do not expose to liquids.
Avoid extreme heat, hot environments and direct sunlight
when charging.
Legal:
Nimble products are meant for use only with the appropriate,
compatible devices. Manufacturer is not responsible for any
damages to any device incurred through the use of this
product. Manufacturer will not be responsible or liable in any
way to the user, or to any third party, for any damages the user
or a third party may incur as a result of any intended or
unintended use, or misuse of this product with other devices
or accessories other than functions for which this product is
designed. In using this product, you agree to indemnify the
Manufacturer for any resulting damages or injuries to you or
any third parties.