Ninebot PJ05JHZY User manual

Scooter Seat User Manual
V 1.0

Welcome!
This scooter seat is applicable to Ninebot KickScooter. Enjoy a comfortable
ride on your seat.
For aftersales and contact information, please visit www.segway.com for
more details.

1 Product and Accessories
1Foldable Base 2
Seat Post Oset and Saddle Kit
3Accessories
Flat Washer ×4Spring Washer ×4Screw ×4
5mm
including plastic tube
Plastic Locking
Block ×2
Inner Hexagon
Wrench ×1
Outer Hexagon
Wrench ×1

2 Functional Diagram
Folding Box Quick Release: to fold or unfold the saddle.
Seat Post Quick Release: to adjust saddle height.
Saddle-Turning Part: pull up to turn the seat cushion.
Seat Post Oset
Saddle
Folding Box Quick Release
Bottom Plate
Locking Button
Saddle-Turning Part
Seat Post Quick Release
Saddle Mounting Holes of
Ninebot KickScooter

1
2
3 Installation and Usage
Place the foldable base
Press the locking button; mesh the seat stay and the locking button; lock the
folding box quick release; place the base on the back of the scooter.
Lock the screw
Ninebot KickScooter: Place two plastic locking blocks between both sides of
the bottom plates and the scooter; mount each hex screw into the saddle
mounting hole and pre-tighten (8 rounds) them to fix the plastic locking
blocks; tighten the screws in the order shown in the figure.
Assembly Instruction
1
3
4
2

3Mount Seat Post Oset and Saddle Kit
a. Unlock and adjust the seat
post quick release.
b. Insert the seat post oset into the
plastic tube rotationally; adjust it to
proper height; lock the quick release.
Plastic Tube
Align the saddle mounting holes and the recess holes of the two locking
blocks; pre-tighten the screws.
Make sure that the plastic tube is in
the seat post before mounting.
Don’t expose the minimum insertion
mark when adjusting height.
Align Saddle
Mounting Holes
Adjust Quick
Release
Minimum
Insertion Mark

4Adjust Saddle
5
6
Adjust the saddle to a proper position
and lock it. You can turn and fold the
saddle using the saddle-turning part.
Check whether the saddle is
mounted firmly before your ride, and
if not, use an outer hexagon wrench to
lock the hexagon nut on the turner.
Ride by sitting
After mounting the saddle, please check
whether all the components are mounted
firmly (especially two quick releases and
screws on the base) and then enjoy a
comfortable ride.
Fold and Unfold the Saddle
To fold the scooter saddle, unlock the
folding box quick release and fold the base.

5 Product Information
4 Precautions
Item Scooter Seat for Ninebot KickScooter
Model
Highly-elastic foam sponge
Steel, aluminum alloy
8.7 × 10.6 × 26.8 inch (220 × 270 × 680 mm)
(Saddle Maximum Height)
Vacuum forming
220 lbs (100 kg)
5.5 lbs (2.5 kg)
PJ05JHZY
Size
Material
Saddle Material
Saddle Forming
Maximum Load
Installation Toolkit
Net weight
1. Make sure that the saddle is mounted firmly and the two quick releases are
locked before each ride.
2. To fold the scooter, fold the saddle first.
3. The scooter is designed for one rider only.
4. Do not abandon the plastic tube contained in the seat post, otherwise the seat
post will sink.
5. The scooter seat cannot be mounted if a pedestal pad has been mounted on a
Ninebot KickScooter.
Screw ×4; Spring Washer ×4; Flat Washer ×4;
Plastic Locking Block ×2; Inner Hexagon Wrench ;
Outer Hexagon Wrench
Height Adjustment
Range
20.1–24.8 inch (51–63 cm)(The height from the ground to
the scooter pedestal is not included in that from the
scooter pedestal to the top surface of the seat cushion)