Ninja XSKBGA User manual

XSKBGA
XSKBGA6
XSKBGAC
OWNER’S GUIDE
www.NutriNinjaAutoIQ.com

1-877-646-52881
WHEN USING ELECTRICAL APPLIANCES, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR
12 TBSP. COFFEE AND SPICE NINJA®GRINDER
ATTACHMENT.
CAUTION: THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY.
CAUTION: BLADE ASSEMBLY IS SHARP.
HANDLE WITH CARE WHEN HANDLING OR
CLEANING THE BLADE ASSEMBLY.
CAUTION: CHECK THE GRINDING CUP FOR
PRESENCE OF FOREIGN OBJECTS BEFORE
USING.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. Make sure that the grinder is securely locked in place
before operating the appliance.
2. Turn the appliance Off and remove the power cord
from the electrical outlet when not in use, before
assembling or disassembling parts and before
cleaning. To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power cord.
3. Never leave the grinder unattended when in use.
4. Keep hands, hair, clothing, as well as utensils out of
container while processing to reduce the risk of severe
injury to persons or damage to the grinder.
5. Always use this grinder on a dry, stable work surface
away from water.
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only

www.NutriNinjaAutoIQ.com 2
EN
6. DO NOT allow young children to operate the
grinder
or
use as a toy. Close supervision is necessary when any
grinder
is used by or near children.
7. DO NOT use this grinder for anything other than its
intended use.
8. DO NOT operate this grinder on or near any hot
surfaces (such as gas or electric burner, or in a
heated oven).
9. DO NOT expose grinder to extreme
temperaturechanges.
10. DO NOT use grinder if the parts are cracked or chipped.
11. DO NOT use the grinder if blades are bent ordamaged.
12. DO NOT attempt to sharpen blades.
13. DO NOT overfill.
14. DO NOT operate the grinder empty.
15. DO NOT operate without the cover in place.
16. DO NOT try to defeat the interlock mechanism.
17. DO NOT use outdoors.
18 For further instructions please refer to the appliance’s
instruction manual for the model numbers listed below.
SAVE THESE
INSTRUCTIONS
THIS ACCESSORY IS COMPATIBLE WITH
THE FOLLOWING MODELS:
BL480 Auto-iQ™series*
BL490 Auto-iQ™series
BL640 Auto-iQ™series
BL680 Auto-iQ™series**
* The Ninja
®
Grinder is only compatible with certain models of the
BL480. If your Ninja
®
Grinder does not work with your BL480, please
call 1-877-646-5288 for more information on how to proceed.
** Not Compatible with BL685
To learn more about which Ninja blender is compatable
with this accessory, visit www.nutrininjaautoiq.com or call
customer service at 1-877-646-5288.

1-877-646-52883
LORS DE L’USAGE D’UN APPAREIL ÉLECTRIQUE,
DES MESURES DE SÉCURITÉ ÉLÉMENTAIRES
DEVRAIENT TOUJOURS ÊTRE RESPECTÉES, Y
COMPRIS LES MESURES SUIVANTES :
LISEZ TOUTES LES INSTRUCTIONS AVANT
D’UTILISER VOTRE MOULIN À CAFÉ ET À ÉPICES
NINJAMD DE 12 C. À TABLE.
MISE EN GARDE : CET APPAREIL EST CONÇU
POUR UN USAGE DOMESTIQUE SEULEMENT.
MISE EN GARDE : LES LAMES SONT
TRANCHANTES. SOYEZ PRUDENT LORSQUE VOUS
MANIPULEZ OU NETTOYEZ LE JEU DE LAMES.
MISE EN GARDE : VÉRIFIER LE RÉCIPIENT
POUR LA PRÉSENCE D’OBJETS ÉTRANGERS
AVANT DE L’UTILISER.
AVERTISSEMENT
POUR RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION ET DE BLESSURES :
1. Assurez-vous que le moulin est solidement verrouillé
avant de mettre en marche l’appareil.
2. Veuillez éteindre le mélangeur (position « Off ») et
débrancher le cordon d’alimentation de la prise de
courant lorsqu’il n’est pas utilisé et avant le nettoyage,
l’assemblage ou le démontage des pièces. Pour
débrancher l’appareil, tirez sur la fiche et retirez-la de
la prise d’alimentation. Ne tirez jamais sur le cordon.
3. Ne laissez jamais le moulin sans surveillance
pendantl’utilisation.
4. Afin de réduire le risque de blessures graves ou
de dommages à l’appareil, gardez les mains, les
cheveux, les vêtements et les ustensiles hors du
moulin pendant l’utilisation.
5. Avant de l’utiliser, posez toujours le moulin sur une
surface de travail sèche et de niveau, loin de l’eau.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Pour usage domestique seulement

www.NutriNinjaAutoIQ.com 4
FR
6. NE PERMETTEZ PAS aux jeunes enfants d’utiliser
le moulin ou de s’en servir comme jouet. Une
surveillance attentive est nécessaire lors de l’emploi
du moulin par des enfants ou à proximité de ceux-ci.
7. Utilisez le moulin UNIQUEMENT aux fins pour
lesquelles il est prévu.
8. N’UTILISEZ PAS ce moulin sur une surface chaude
ou près de celle-ci (brûleur à gaz, plaque électrique
ou four chaud).
9. N’EXPOSEZ PAS le moulin à des changements de
température extrêmes.
10. N’UTILISEZ PAS le moulin si ses composants sont
fissurés ou ébréchés.
11. N’UTILISEZ PAS le moulin si le jeu de lames est
tordu ou endommagé.
12. NE TENTEZ PAS d’affûter les lames.
13. NE REMPLISSEZ PAS excessivement le moulin.
14. NE FAITES PAS fonctionner le moulin à vide.
15. NE FAITES PAS fonctionner le moulin sans avoir
installé son couvercle.
16. NE TENTEZ PAS de désactiver le mécanisme de
verrouillage. Assurez-vous que le jeu de lames est
bien inséré avant de mettre en marche le moulin.
17. N’UTILISEZ PAS cet appareil à l’extérieur.
18 Pour de plus amples directives, veuillez consulter le
manuel d’instructions de l’appareil correspondant aux
numéros de modèle indiqués ci-dessous.
VEUILLEZ CONSERVER
CES DIRECTIVES
CET ACCESSOIRE EST COMPATIBLE AVEC LES
MODÈLES SUIVANTS :
Série BL480 Auto-iQMC*
Série BL490 Auto-iQMC
Série BL640 Auto-iQMC
Série BL680 Auto-iQMC**
* Le moulin Ninja
MD
est uniquement compatible avec certains modèles
BL480. Si votre moulin Ninja
MD
ne fonctionne pas avec votre appareil
BL480, veuillez appeler 1-877-646-5288 pour obtenir de plus
amples informations concernant la procédure à suivre.
** Non Compatible avec le BL685
Pour savoir plus sur quel mélangeur Ninja est compatible
avec cet accessoire, visitez www.nutrininjaautoiq.com ou
appelez le service à la clientèle au 1-877-646-5288.

1-877-646-52885
AL USAR APARATOS ELÉCTRICOS, SIEMPRE
DEBE SEGUIR PRECAUCIONES BÁSICAS DE
SEGURIDAD, INCLUYENDO LAS SIGUIENTES:
LEA TODAS LAS INSTRUCCIONES ANTES DE
USAR SU MOLEDOR DE CAFÉ Y ESPECIES DE 12
CUCHARADAS.
CUIDADO: ESTE PRODUCTO ELÉCTRICO ES
PARA USO DOMÉSTICO SOLAMENTE.
CUIDADO: LAS CUCHILLAS SON FILOSAS.
TENGA MUCHO CUIDADO AL MANIPULAR O
LIMPIAR LAS CUCHILLAS.
CUIDADO: COMPRUEBE LA TAZA MOLEDORA
COPA DE LA PRESENCIA DE OBJETOS
EXTRAÑOS ANTES DE SU USO.
ADVERTENCIA
PARA REDUCIR EL RIESGO DE INCENDIO,
DESCARGA ELÉCTRICA O DAÑOS PERSONALES:
1. Verifique que el moledor esté bien trabado en su
lugar antes de usar el artefacto.
2. Apague la licuadora y desenchufe el cable de
alimentación del tomacorriente cuando no lo use, antes
de colocarle o quitarle partes y antes de limpiarlo.
Para desenchufarlo, sujete el enchufe y retírelo del
tomacorriente. Nunca tire del cable de alimentación.
3. Nunca deje un moledor desatendido cuando lo use.
4. Mantenga sus manos, cabello, ropa y utensilios fuera
del recipiente al procesar para reducir la posibilidad de
daños graves a personas o de dañar el moledor.
5. Use siempre este moledor sobre una superficie de
trabajo seca, estable lejos del agua.
MEDIDAS IMPORTANTES DE SEGURIDAD
Para uso doméstico solamente

www.NutriNinjaAutoIQ.com 6
SP
6. NO
permita que los niños pequeños usen el moledor
o que lo traten como un juguete. Tenga mucho
cuidado al utilizar cualquier moledor cerca de niños.
7. NO utilice este moledor para ningún otro propósito
distinto al indicado.
8. NO use este moledor sobre o cerca de superficies
calientes (como una estufa eléctrica o de gas o en un
horno caliente).
9. NO exponga el moledor a cambios bruscos de
temperatura.
10. NO
use el moledor si sus partes están rajadas o rotas.
11. NO use el moledor si las cuchillas están dobladas o
dañadas.
12. NO intente afilar las cuchillas.
13. NO lo llene de más.
14. NO haga funcionar el moledor cuando esté vacío.
15. NO los use sin la tapa colocada.
16. NO trate de desactivar el mecanismo de traba.
Verifique que las cuchillas de corte estén
correctamente insertadas antes de usar el moledor.
17. NO lo use en el exterior.
18 Por más instrucciones, consulte el manual de
instrucciones del artefacto para los números de
modelo indicados a continuación.
CONSERVE ESTAS
INSTRUCCIONES
ESTE ACCESORIO ES COMPATIBLE CON LOS
SIGUIENTES MODELOS:
Serie BL480 Auto-iQMR*
Serie BL490 Auto-iQMR
Serie BL640 Auto-iQMR
Serie BL680 Auto-iQMR**
* El moledor Ninja®no es compatible con ciertos modelos de la BL480. Si
su moledor Ninja®no funciona con su BL480, llame 1-877-646-5288
para obtener más información acerca de lo que debe hacer.
** No es compatible con la BL685
Para aprender más acerca de lo que la licuadora Ninja es
compatible con este accesorio, vaya www.nutrininjaautoiq.com
o llame al servicio al cliente al 1-877-646-5288.

1-877-646-52887
Using the 12 tbsp. Coffee and Spice Ninja®Grinder Attachment
IMPORTANT: DO NOT OVERFILL! TO AVOID SPILLING, DO
NOT ADD INGREDIENTS PAST THE “MAX FILL” LINE.
NOTE: For best performance, only grind dry
ingredients. Do not grind wet ingredients.
1Remove all packaging material and labels from the
Coffee & Spice Grinder.
2Wash the lid and blade assembly with stainless steel
grinding cup in warm, soapy water with a soft cloth.
CAUTION: Handle the blade assembly with
stainless steel grinding cup with care when
washing as the blades are very sharp.
3Rinse and dry thoroughly.
WARNING: NEVER LEAVE THE APPLIANCE UNATTENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN HANDLING THE BLADE ASSEMBLIES AS THE BLADES ARE VERY SHARP.
CAUTION: CHECK THE GRINDING CUP FOR PRESENCE OF FOREIGN OBJECTS BEFORE USING.
4The lid and blade assembly with stainless
steel grinding cup are all dishwasher safe. It is
recommended that the lid and blade assembly with
stainless steel grinding cup be placed on the top
rack. Ensure that the blade assembly with stainless
steel grinding cup is removed from the lid before
placing in the dishwasher.
IMPORTANT: Place the motor base of the main
unit used on a clean, dry, level surface such as
a counter or table top.
5Make sure that the motor base is plugged in for use. No
lights will turn on.

www.NutriNinjaAutoIQ.com 8
EN
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
6 Add ingredients to the stainless steel grinding cup.
Use the measurement lines on the grinding cup for
added convenience!
7Place the lid onto the blade assembly with stainless
steel grinding cup so that the tabs on the cup meet
the entry point on the blade assembly. Twist until the
lid is locked in place. (Fig. 1)
8Place the grinder onto the motor base, aligning the
tabs on the grinder with the motor base. Turn it
clockwise until it locks in place, you will hear a click
when the lock is engaged. (Fig. 2)
9Follow the operation instructions from the main
instruction manual for the base being used. Press
one of the appropriate buttons to start.
(Fig. 3)
10 To remove the grinder, ensure that the motor has stopped
running. Then turn the grinder counter clockwise (Fig. 4)
and pull straight up to remove. (Fig. 5)
11 Remove the blade assembly with stainless steel cup
by twisting the lid counter clockwise. Be sure to
store the grinder with the lid attached to the blade
assembly with the stainless steel cup.
12 Make sure that the motor base is unplugged when
not in use.

1-877-646-52889
Grinding Coffee Chart
WHOLE SPICE* COARSE MEDIUM FINE
1-3 Tbsp. 10 sec. 15 sec. 25 sec.
4-6 Tbsp. 10 sec. 15 sec. 25 sec.
7-9 Tbsp. 10 sec. 20 sec. 30 sec.
10-12 Tbsp. 10 sec. 20 sec. 30 sec.
Select HIGH or START/STOP depending on your blender model.
Grinding Spices Chart
* Grind times shown are for these four popular spices: black peppercorns, cumin, coriander, and fennel.
WHOLE BEANS FRENCH PRESS NINJA COFFEE BAR™
(OR YOUR DRIP COFFEE MAKER) ESPRESSO
1-3 Tbsp. 10 sec. 15 sec. 25 sec.
4-6 Tbsp. 5 sec. 10 sec. 20 sec.
7-9 Tbsp. 5 sec. 10 sec. 20 sec.
10-12 Tbsp. 10 sec. 15 sec. 25 sec.
Select HIGH or START/STOP depending on your blender model.

www.NutriNinjaAutoIQ.com 10
EN
Care & Maintenance
CLEANING:
CAUTION: MAKE SURE THAT THE MOTOR BASE
IS UNPLUGGED FROM THE POWER SOURCE
BEFORE INSERTING OR REMOVING ANY
ATTACHMENT AND BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR BASE
INTO WATER OR ANY OTHER LIQUID.
CAUTION: HANDLE THE BLADE ASSEMBLY
CAREFULLY AS THE BLADES ARE VERY SHARP!
IMPORTANT: IT IS RECOMMENDED THAT
THE COFFEE & SPICE GRINDER IS CLEANED
THOROUGHLY AFTER EACH USE.
1Separate/remove all parts form each other.
2Clean the motor base with a damp cloth and wipe dry.
3Place the lid and blade assembly with stainless steel
grinding cup in the top rack of the dishwasher.
STORING:
1Store the grinder (the lid and blade assembly with
stainless steel grinding cup) where it will not be
damaged and won’t cause a hazard.
Troubleshooting
Unit doesn’t turn on:
• Makesuretheunitispluggedin.
• Insertandrotategrinderclockwiseinthebaseuntilit
“clicks”.
Unit doesn’t turn off:
• Removegrinderfrombasebyrotatinggrinder
counterclockwise and lifting out. Display should turn off.
Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
• Setthecuponalevelsurface.Placethelidonthetopofthe
blade assembly with stainless steel grinding cup and align
the tabs so that the lid fits into the blade assembly. Twist
until the lid is locked in place.
Coffee or spices are not evenly ground:
• Forbestresultswhengrindinguseveryshortpulsesby
quickly pressing the “PULSE” button.

1-877-646-528811
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one
(1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions
and exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your grinder fails to operate properly while in use under normal household conditions within the warranty period, return the
complete grinder and accessories, freight prepaid. For assistance with warranty service options or customer support, please
call our customer care and product specialists at , call 1-877-646-5288 or visit our website www.NutriNinjaAutoIQ.com.
If the grinder is found to be defective in material or workmanship, SharkNinja Operating LLC will repair or replace it free of
charge. Proof of purchase is required and a fee of $5.95 will apply to cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or
conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations
expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for
incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or
limitation of incidental or consequential damages, so the above may not apply to you.

www.NutriNinjaAutoIQ.com 12
EN
Product Registration
Please visit www.NutriNinjaAutoIQ.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to
have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or
from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you
insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of
your package “ATTENTION CUSTOMER SERVICE”.
SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.NutriNinjaAutoIQ.com
PRINTED IN CHINA
Ninja is a registered trademark of SharkNinja Operating LLC. Auto-iQ is a trademark of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained
herein are subject to change without notice.

1-877-646-528813
Mode d’emploi du moulin à café et épices de 12 c. à table de NinjaMD
IMPORTANT : NE PAS REMPLIR EXCESSIVEMENT LE
RÉCIPIENT! POUR ÉVITER LES DÉGÂTS, VEILLEZ À
CE QUE LES INGRÉDIENTS NE DÉPASSENT PAS LA
LIGNE DE REMPLISSAGE « MAX ».
NOTE: For best performance, only grind dry
ingredients. Do not grind wet ingredients.
1Retirez tous les composants d’emballage et toutes les
étiquettes du moulin à café et épices.
2Avec un linge doux, lavez le couvercle et le récipient
à mouture en acier inoxydable avec jeu de lames à
l’eau savonneuse tiède.
AVERTISSEMENT : NE LAISSEZ JAMAIS L’APPAREIL SANS SURVEILLANCE PENDANT L’UTILISATION.
MISE EN GARDE : SOYEZ PRUDENT LORSQUE VOUS NETTOYEZ LES JEUX DE LAMES, CAR LES LAMES
SONT TRÈS COUPANTES.
MISE EN GARDE : VÉRIFIER LE RÉCIPIENT POUR LA PRÉSENCE D’OBJETS ÉTRANGERS AVANT DE
L’UTILISER.
MISE EN GARDE : Soyez prudent lorsque vous
manipulez et nettoyez le récipient en acier
inoxydable avec jeu de lames, car les lames
sont très coupantes.
3Rincez et séchez complètement les pièces.
4Le couvercle et le récipient en acier inoxydable
avec jeu de lames vont au lave-vaisselle. Il est
recommandé de mettre le couvercle et le récipient
en acier inoxydable avec jeu de lames dans le panier
supérieur du lave-vaisselle. Veuillez séparer le
couvercle du récipient en acier inoxydable avec jeu
de lames avant de les mettre dans le lave-vaisselle.
IMPORTANT : Déposez le bloc-moteur de
l’appareil sur une surface propre, sèche et de
niveau, comme un comptoir ou une table.

www.NutriNinjaAutoIQ.com 14
FR
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
5Assurez-vous que le bloc-moteur est branché avant
d’utiliser l’appareil. Aucun témoin lumineux n’est allumé.
6 Ajoutez les ingrédients dans le récipient en acier
inoxydable. Pour plus de commodité, utilisez les
lignes de mesure sur la paroi du récipient à mouture!
7Mettez le couvercle sur le récipient en acier inoxydable
avec jeu de lames en alignant les onglets du récipient avec
le point d’insertion du jeu de lames. Vissez le couvercle
jusqu’à ce que l’assemblage soit étanche. (Fig. 1)
8Retournez le moulin et placez-le à l’envers sur le bloc-
moteur, en alignant les onglets du moulin avec le bloc-
moteur. Tournez le moulin dans le sens des aiguilles d’une
montre jusqu’à ce qu’elle soit verrouillée en place. Vous
entendrez un clic lorsque le verrou s’enclenche. (Fig. 2)
9Suivez les directives du manuel d’instructions de
l’appareil utilisé. Enfoncez l’un des boutons de
l’appareil pour le mettre en marche.
(Fig. 3
)
10 Avant de retirer le moulin, assurez-vous que le moteur
cesse de tourner. Ensuite, faites tourner le moulin dans
le sens contraire des aiguilles d’une montre (Fig. 4) et
tirez-le vers le haut pour le retirer de l’appareil. (Fig. 5)
11 Pour dégager le récipient en acier inoxydable avec
jeu de lames, faites tourner le couvercle dans le sens
contraire des aiguilles d’une montre. Assurez-vous
de fixer le couvercle au récipient en acier inoxydable
avec jeu de lames avant de ranger le moulin.
12 Assurez-vous que le bloc-moteur est débranché
lorsque l’appareil n’est pas utilisé.

1-877-646-528815
Tableau de mouture du café
Tableau de mouture des épices
GRAINS ENTIERS CAFETIÈRE À PISTON NINJA COFFEE BARMC
(OU CAFETIÈRE GOUTTE-À-GOUTTE)
ESPRESSO
1-3 c. à table 10 sec. 15 sec. 25 sec.
4-6 c. à table 5 sec. 10 sec. 20 sec.
7-9 c. à table 5 sec. 10 sec. 20 sec.
10-12 c. à table 10 sec. 15 sec. 25 sec.
Sélectionnez Vitesse élevée « High » ou Marche/arrêt (« Start/Stop ») selon le modèle de votre mélangeur.
* Les durées indiquées pour la mouture correspondent à ces quatre épices populaires : poivre, cumin, coriandre et fenouil.
ÉPICES ENTIÈRES* GROSSIÈRE MOYENNE FINE
1-3 c. à table 10 sec. 15 sec. 25 sec.
4-6 c. à table 10 sec. 15 sec. 25 sec.
7-9 c. à table 10 sec. 20 sec. 30 sec.
10-12 c. à table 10 sec. 20 sec. 30 sec.
Sélectionnez Vitesse élevée « High » ou Marche/arrêt (« Start/Stop ») selon le modèle de votre mélangeur.

www.NutriNinjaAutoIQ.com 16
FR
Soins et entretien
NETTOYAGE :
MISE EN GARDE : ASSUREZ-VOUS QUE LE BLOC-
MOTEUR EST DÉBRANCHÉ AVANT D’INSÉRER
OU DE RETIRER DES ACCESSOIRES ET AVANT
TOUTNETTOYAGE.
MISE EN GARDE : N’IMMERGEZ PAS LE BLOC-
MOTEUR DANS L’EAU NI DANS UN AUTRE LIQUIDE.
MISE EN GARDE : SOYEZ PRUDENT LORSQUE
VOUS MANIPULEZ LE JEU DE LAMES, CAR LES
LAMES SONT TRÈS COUPANTES!
IMPORTANT : IL EST RECOMMANDÉ DE BIEN
NETTOYER LE MOULIN À CAFÉ ET ÉPICES APRÈS
CHAQUE UTILISATION.
1Retirez et désassemblez toutes les pièces.
2Nettoyez le bloc-moteur avec un linge humide et
essuyez-le pour le sécher.
3Mettez le couvercle et le récipient en acier inoxydable avec
jeu de lames dans le panier supérieur du lave-vaisselle.
RANGEMENT :
1Rangez le moulin (le couvercle fixé au récipient en
acier inoxydable avec jeu de lames) à l’abri des
dommages et des risques pour la sécurité.
Dépannage
L’appareil ne se met pas en marche :
• Vériezquel’appareilestbranché.
• Insérezlemoulinettournez-ledanslesensdesaiguilles
d’une montre jusqu’à ce que vous entendiez un « clic ».
L’appareil ne s’éteint pas :
• Retirezlemoulinenletournantdanslesenscontraire
des aiguilles d’une montre, puis tirez-le vers le haut pour
le dégager de l’appareil. L’affichage devrait s’éteindre.
Débranchez le cordon d’alimentation de la prise de courant.
Il est difficile d’assembler le couvercle/jeu de lames :
• Posezlerécipientsurunesurfaceplane.Mettezlecouvercle
sur le récipient en acier inoxydable avec jeu de lames
en alignant les onglets afin d’assembler correctement le
couvercle et le jeu de lames. Vissez le couvercle jusqu’à ce
que l’assemblage soit étanche.
La mouture du café ou des épices n’est pas homogène :
• Pourdesrésultatsoptimaux,utilisezdetrèsbrèves
impulsions en appuyant brièvement sur le bouton « PULSE ».

1-877-646-528817
GARANTIE LIMITÉE D’UN (1) AN
SharkNinja Operating LLC garantit ce produit contre toute défectuosité de matériel ou de main-d’œuvre pour une période
d’un (1) an à compter de la date d’achat, dans le cadre d’une utilisation domestique normale, en vertu des conditions,
exclusions et exceptions suivantes.
La responsabilité de SharkNinja Operating LLC se limite au coût des réparations ou du remplacement de l’appareil, à sa
discrétion. Cette garantie limitée ne couvre pas l’usure normale des pièces et ne s’applique pas aux appareils ayant été altérés
ou utilisés à des fins commerciales. Cette garantie limitée ne couvre pas les dommages causés par une mauvaise utilisation,
l’usage abusif, la négligence lors de la manipulation, un emballage inadéquat ou la mauvaise manipulation en transit. Cette
garantie limitée ne couvre pas les dommages ou défauts causés par ou résultant du transport, des réparations, ou de l’entretien
ni de l’altération du produit ou de ses pièces, effectués par un réparateur non autorisé par SharkNinja Operating LLC.
Si votre moulin ne fonctionne pas correctement dans des conditions d’utilisation domestique normales, et ce, pendant la
période de garantie, vous pouvez retourner le moulin et les accessoires avec la preuve et la date d’achat, port payé. Pour de
l’assistance concernant les options de service de la garantie ou le soutien à la clientèle, veuillez appeler nos spécialistes du
Service d’assistance et des produits au 1 (877) 646-5288 ou visitez notre site Web www.NutriNinjaAutoIQ.com. S’il s’avérait que
le moulin présente une défectuosité matérielle ou de fabrication, SharkNinja Operating LLC le réparera ou le remplacera sans
frais. Vous devez inclure une preuve d’achat et un montant de 5,95 $ pour couvrir les frais d’expédition de transport de retour. *
Cette garantie limitée s’applique à l’acheteur original de l’appareil et exclut toutes les autres garanties juridiques, implicites ou
conventionnelles. Le cas échéant, la responsabilité de SharkNinja Operating LLC se limite aux obligations spécifiques expressément
énoncées au titre de cette garantie limitée. En aucun cas SharkNinja Operating LLC ne peut être tenue responsable d’incidents ou
de dommages indirects à quiconque et de quelque nature que ce soit. Certains états et certaines provinces n’autorisent pas l’exclusion
ou la limitation de dommages accessoires ou indirects; dans ce cas, cette disposition ne s’appliquerait pas.

www.NutriNinjaAutoIQ.com 18
FR
Enregistrement du produit
Veuillez visiter le site Web www.NutriNinjaAutoIQ.com ou composer le 1-877-646-5288 pour enregistrer votre nouveau
produit NinjaMD dans les dix (10) jours suivant l’achat. Vous devrez fournir le nom du magasin, la date d’achat, le numéro de
modèle, ainsi que votre nom et adresse.
L’enregistrement nous permettra de vous contacter dans l’éventualité peu probable d’un avis sur la sécurité du produit. En
enregistrant votre produit, vous reconnaissez avoir lu et compris les instructions d’utilisation et les consignes de sécurité
énoncées dans ce document.
La garantie limitée vous confère des droits juridiques auxquels peuvent s’ajouter d’autres droits qui varient d’un État à
l’autre et d’une province à l’autre.
*IMPORTANT : Emballez soigneusement l’appareil pour éviter tout dommage lors du transport. Avant d’emballer
l’appareil, assurez-vous d’y apposer une étiquette portant vos nom, adresse complète et numéro de téléphone
ainsi qu’une note précisant les détails de l’achat, le modèle et le problème éprouvé par l’appareil. Nous vous
recommandons d’assurer votre colis (puisque les dommages lors du transport ne sont pas couverts par la
garantie limitée). Indiquez sur l’extérieur de votre colis « À L’ATTENTION DE : SERVICE À LA CLIENTÈLE ».
SharkNinja Operating LLC
É.-U. : Newton, MA 02459
CANADA : Saint-Laurent (Québec) H4S 1A7
1-877-646-5288
www.NutriNinjaAutoIQ.com
IMPRIMÉ EN CHINE
Ninja est une marque de commerce déposée de SharkNinja Operating LLC. Auto-iQ est une marque de commerce de SharkNinja Operating LLC.
Les illustrations peuvent différer du produit réel. Nous nous efforçons sans cesse d’améliorer nos produits et, de ce fait, les
spécifications décrites dans ce guide sont sujettes à des changements sans préavis.

1-877-646-528819
Uso del moledor de café y especies de 12 cucharadas de Ninja®
IMPORTANTE: ¡NO LA LLENE DE MÁS! PARA EVITAR
DERRAMES, NO AGREGUE INGREDIENTES POR
ENCIMA DE LA LÍNEA DE “MAX FILL”.
NOTE: For best performance, only grind dry
ingredients. Do not grind wet ingredients.
1Saque todo el material de embalaje y etiquetas del
moledor de café y especies.
2Lave la tapa y las cuchillas con la taza moledora de acero
inoxidable usando agua tibia y jabón, con un trapo suave.
CUIDADO: Tenga cuidado al limpiar las
cuchillas con la taza moledora de acero
inoxidable ya que las cuchillas son muy filosas.
ADVERTENCIA: NUNCA DEJE EL ARTEFACTO DESATENDIDO MIENTRAS ESTÉ FUNCIONANDO.
CUIDADO: TENGA CUIDADO AL MANIPULAR LAS CUCHILLAS YA QUE SON MUY FILOSAS.
CUIDADO: COMPRUEBE LA TAZA MOLEDORA COPA DE LA PRESENCIA DE OBJETOS EXTRAÑOS ANTES
DE SU USO.
3Enjuáguelas y séquelas completamente.
4La tapa y las cuchillas con la taza moledora de
acero inoxidable son aptas para el lavavajillas. Le
recomendamos colocar la tapa y las cuchillas con
la taza moledora de acero inoxidable en el estante
de arriba. Asegúrese de remover las cuchillas con la
taza moledora de acero inoxidable de las tapa antes
de colocarlas en el lavavajillas.
IMPORTANT: Place the motor base of the main
unit used on a clean, dry, level surface such as
a counter or table top.
5Verifique que la base del motor esté enchufada y lista
para usar. No se encenderá ninguna luz.
This manual suits for next models
2
Table of contents
Languages: