NISBETS ESSENTIALS FD499-A User manual

Fly Killer
Instruction manual
Model • Modèle • Modell • Modello • Modelo • Malli:
FD499-A
FD499-A_A5_v2_20220324.indb 1FD499-A_A5_v2_20220324.indb 1 2022/3/24 15:522022/3/24 15:52

2
EN Telephone Helpline: 1300225960
Safety Instructions
• A service agent/qualified
technician should carry out
installation and any repairs
if required. Do not remove
any components on this
product.
• Consult Local and National
Standards to comply with
the following:
- Health and Safety at Work
Legislation
- Fire Precautions
- Wiring Regulations
- Building Regulations
• Always switch off and
disconnect the power
supply to the appliance
before cleaning.
• Install the appliance out of
the reach of children.
• Never insert hands or other
objects into the appliance
while it is connected to the
power supply.
• Install the Fly Killer at least
1 metre away from food
preparation areas.
• Never use near flammable
objects.
• For INDOOR use only.
• Keep all packaging away
from children. Dispose of
the packaging in accordance
to the regulations of local
authorities.
• If the power cord is
damaged, it must be
replaced by a Nisbets
Essentials agent or a
recommended qualified
technician in order to avoid
a hazard.
• Nisbets Essentials
recommends that this
appliance should be
periodically tested (at least
annually) by a Competent
Person. Testing should
include, but not be limited
to: Visual Inspection,
Polarity Test, Earth
Continuity, Insulation
Continuity and Functional
Testing.
• Danger - High voltage!
• The appliance emits UV
radiation. Do not stare at
the light.
FD499-A_A5_v2_20220324.indb 2FD499-A_A5_v2_20220324.indb 2 2022/3/24 15:522022/3/24 15:52

3
AUEN
Telephone Helpline: 1300225960
• The appliance is not to be
used in locations where
flammable vapour or
explosive dust is likely to
exist.
• Do not use in barns, stables
and similar locations.
Introduction
Please take a few moments to carefully read through
this manual. Correct maintenance and operation
of this machine will provide the best possible
performance from your Nisbets Essentials product.
Pack Contents
The following is included:
• Fly Killer
• Instruction manual
• Hanging chain
Nisbets Essentials prides itself on quality and service,
ensuring that at the time of unpacking the contents
are supplied fully functional and free of damage.
Should you find any damage as a result of transit,
please contact your Nisbets Essentials dealer
immediately.
Installation
Note: Ensure the mounting substrate and the
fixings used can support the weight of the
appliance. If in doubt seek professional advice or
assistance.
1. Remove all packaging and protective film from
the Fly Killer.
2. For best results, locate the Fly Killer in the
darkest part of the room, but at least 1 metre
away from food preparation areas.
Note: Close proximity to other
light sources such as sky lights
and windows will reduce the
effectiveness of the Fly Killer.
3. Connect the appliance to mains power.
Operation
WARNING: Under no circumstances
should hands be placed anywhere
near the high voltage grid when the
appliance is operational.
The fly killer works by luring insects on to an
electrified metal grid using ultra-violet light. It uses
no chemicals and is pollution free. To use the Fly
Killer:
1. Press the switch to the ON (I) position. Ensure it
is set to OFF (O) before plugging into mains.
2. The light will come on and the grid will become
electrically charged.
Cleaning, Care &
Maintenance
Always switch off the power and
disconnect the appliance from the
power supply before cleaning.
• Clean the collection tray regularly with warm
soapy water.
• DO NOT immerse the appliance in water. Wipe
the safety guard and external casing with a damp
cloth.
• Change the bulbs every 6 months.
FD499-A_A5_v2_20220324.indb 3FD499-A_A5_v2_20220324.indb 3 2022/3/24 15:522022/3/24 15:52

4
EN Telephone Helpline: 1300225960
Changing the Bulb
WARNING: Always turn Off the appliance and disconnect from the power supply before
changing the bulb.
1. Remove the collection tray.
2. Lay the appliance face down.
3. Unscrew the two screws
holding the safety guard at the
rear of the Fly Killer
[Fig. 1].
1
4. Lift up the guard rail [Fig. 2]. 2
5. Holding the ends of the bulb,
twist it ‘forwards’ in its socket
until it clicks [Fig. 3].
3
6. Slide the bulb up out of its
sockets [Fig. 4].
7. Replace with a new bulb.
8. Twist the new bulb ‘backwards’
to lock it back in place.
9. Replace the guard rail and the
two screws.
4
Troubleshooting
A qualified technician must carry out repairs if required.
Fault Probable Cause Solution
The appliance is
not working
The unit is not switched on Check the unit is plugged in correctly and switched on
Plug or lead is damaged Replace plug or lead
Mains power supply fault Check mains power supply
Tube has expired Refer to the ‘Changing the Bulb’ section
Tube is faulty or has not been
fitted correctly
FD499-A_A5_v2_20220324.indb 4FD499-A_A5_v2_20220324.indb 4 2022/3/24 15:522022/3/24 15:52

5
AUEN
Telephone Helpline: 1300225960
Technical Specifications
Model Voltage Power Dimensions
h x w x d (mm) Weight
FD499-A 220-240V~, 50Hz 23W 272 x 350 x 86 2.56kg
Electrical Wiring
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection
being required they must be readily accessible.
Compliance
The product must not be disposed of as household waste. To help prevent possible harm to human health
and/or the environment, the product must be disposed of in an approved and environmentally safe recycling
process. For further information on how to dispose of this product correctly, contact the product supplier, or
the local authority responsible for waste disposal in your area.
Nisbets Essentials parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and federal
authorities.
Nisbets Essentials products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of Nisbets Essentials.
Every effort is made to ensure all details are correct at the time of going to press, however, Nisbets Essentials reserve the right to change
specifications without notice.
FD499-A_A5_v2_20220324.indb 5FD499-A_A5_v2_20220324.indb 5 2022/3/24 15:522022/3/24 15:52