Nisuta 11N User manual

11N Wireless Broadband Router User Guide

11N Wireless Broadband Router User Guide
Copyright Statement
is the registered trademark of Nisuta. All the products and
product names mentioned herein are the trademarks or registered
trademarks of their respective holders. Copyright of the whole
product as integration, including its accessories and software,
belongs to Nisuta. Without the permission of Nisuta, any individual
or party is not allowed to copy, plagiarize, reproduce, or translate it
into other languages.
All the photos and product specifications mentioned in this guide
are for references only. Upgrades of software and hardware may
occur, and if there are changes, Nisuta is not responsible for
notifying in advance. If you would like to know more about our
product information, please visit our website at www.nisuta.com.

11N Wireless Broadband Router User Guide
Contents
CHAPTER 1 PRODUCT INTRODUCTION ...................................... 1
1.1 Package Contents ................................... 1
1.2 LED Indicators and Port Description .......... 1
CHAPTER 2 PRODUCT INSTALLATION ........................................ 4
CHAPTER 3 HOW TO CONFIGURE TO ACCESS THE
INTERNET ........................................................................................... 6
3.1 How to Set the Network Configurations ..... 6
3.2 Log in to the Router .............................. 11
3.3 Fast Internet Access ............................. 11
3.4 Fast Encryption .................................... 12
CHAPTER 4 ADVANCED SETTINGS ............................................. 14
4.1 System Status ..................................... 14
4.2 WAN Settings....................................... 15
4.3 LAN Settings ........................................ 19
4.4 DNS Settings ....................................... 20
4.5 WAN Medium Type ................................ 21
4.6 Bandwidth Control ................................ 22
4.7 Traffic Statistics.................................... 25
CHAPTER 5 WLAN SETTINGS ....................................................... 27
5.1 Wireless Basic Settings ......................... 27
5.2 Wireless Security Settings ..................... 32
5.2.1 WPS Settings .................................... 32
5.2.2 WPA- PSK ......................................... 34
5.2.3 WPA2- PSK ....................................... 34
5.3 Wireless Access Control......................... 35
5.4 Connection Status ................................ 36

11N Wireless Broadband Router User Guide
CHAPTER 6 DHCP SERVER ............................................................ 37
6.1 DHCP Server ........................................ 37
6.2 DHCP Client List ................................... 37
CHAPTER 7 VIRTUAL SERVER ..................................................... 39
7.1 Port Range Forwarding .......................... 39
7.2 DMZ Settings ....................................... 41
7.3 UPNP Settings ...................................... 42
CHAPTER 8 SECURITY SETTINGS ............................................... 43
8.1 Client Filter Settings ............................. 43
8.2 MAC Address Filter ............................... 44
8.3 URL Filter Settings ................................ 46
8.4 Remote Web Management ..................... 49
CHAPTER 9 ROUTING SETTINGS ................................................ 50
9.1 Routing Table ....................................... 50
9.2 Static Routing ...................................... 50
CHAPTER 10 SYSTEM TOOLS ....................................................... 52
10.1 Time Settings ..................................... 52
10.2 DDNS ................................................ 52
10.3 Backup/Restore .................................. 53
10.4 Restore to Factory Default ................... 55
10.5 Upgrade ............................................ 56
10.6 Reboot the Router .............................. 56
10.7 Password Change ............................... 57
10.8 Syslog ............................................... 57
10.9 Log out ............................................. 58
APPENDIX 1 GLOSSARY................................................................. 59
APPENDIX 2 PRODUCT FEATURES .............................................. 60

11N Wireless Broadband Router User Guide
APPENDIX 3 FAQ.............................................................................. 61
APPENDIX 4 CLEAR WIRELESS CONFIGURATION .................. 63
APPENDIX 5 REGULATORY INFORMATION .............................. 65

11N Wireless Broadband Router User Guide
1
Chapter 1 Product Introduction
Thank you for purchasing the Nisuta Wireless N Broadband Router!
This easy-to-use router provides simple configuration interface which enables you to
configure it with ease. It is based on the latest IEEE802.11n standard, and is backward
compatible with devices of IEEE802.11b/g standards.
The Nisuta wireless router，including router, wireless AP, four-port switch and firewall in
one，provides powerful online monitor function and supports URL filter and MAC filter. With
WDS function, it can repeat and amplify wireless signals so as to enlarge network coverage
area. It truly supports UPnP and WMM to make your audio and video smoother. With QoS
function, it can efficiently distribute the downloading rate for the clients. With super
compatibility, the router can break the access limits in some areas so that multiple
computers can share the Internet access. Additionally, it supports WISP function to access
to the ISP’s wireless hotspots (this function applies only to some of the products).
1.1 Package Contents
Please verify the following items after you open the package:
 One Wireless N Broadband Router
 One Quick Installation Guide
 One Power Adapter
 One Software CD
If any of the listed items are missing or damaged, please contact the Nisuta reseller for
immediate replacement.
1.2 LED Indicators and Port Description
Panel and LED indicators show:

11N Wireless Broadband Router User Guide
2
LED indicator description on the front panel
Back panel port show

11N Wireless Broadband Router User Guide
3
Back panel port description

11N Wireless Broadband Router User Guide
4
Chapter 2 Product Installation
In this user guide, we take NS-WIR300N as an example to explain the installation steps.
The installation steps of other products are similar to this one.
1. Please use only the included power adapter to power your router. (NOTE: Use of an
unmatched power adapter could cause damage to this product).
2. Please connect the router’s LAN port to your computer with an Ethernet cable as shown
below.

11N Wireless Broadband Router User Guide
5
3. Please connect your broadband line provided by your ISP to the router’s WAN port.
4. Insert the included software CD into the CD drive of your computer. After the software
automatically initiates, double click the “Setup” icon and follow the instructions to complete
the installation. You can also enter the router’s Web-based Utility to complete the
configuration.

11N Wireless Broadband Router User Guide
6
Chapter 3 How to configure to access the Internet
3.1 How to Set the Network Configurations
Network Configurations under windows XP
1. Right click “My Network Places” on your computer desktop and select “Properties”.
2. Right click “Local Area Connection” and select “Properties”.

11N Wireless Broadband Router User Guide
7
3. Select “Internet Protocol (TCP/IP)” and click “Properties”.
4. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”. Click “OK” to save the configurations.
Or select “Use the following IP address” and enter the IP address, Subnet mask, Default
gateway as follows:
 IP Address: 192.168.1.XXX: (XXX is a number from 2~254)
 Subnet Mask: 255.255.255.0

11N Wireless Broadband Router User Guide
8
 Gateway: 192.168.1.1
 DNS server: You should input the DNS server address provided by your ISP.
Otherwise, you can enter 192.168.1.1. Click “OK” to save the configurations.
Network Configurations under windows 7
1. Click the network icon on the lower right corner of your computer desktop, and then
click” Open Network and Sharing Center”.

11N Wireless Broadband Router User Guide
9
2. Click “Change adapter settings” on the left side of the window.
3. Right click “Local Area Connection” and select “Properties”.
4. Double click” Internet Protocol Version 4(TCP/IPv4)".

11N Wireless Broadband Router User Guide
10
5. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”. Click “OK” to save the configurations.
Or select “Use the following IP address” and enter the IP address, Subnet mask, Default
gateway as follows:
 IP Address: 192.168.1.XXX: (XXX is a number from 2~254)
 Subnet Mask: 255.255.255.0
 Gateway: 192.168.1.1

11N Wireless Broadband Router User Guide
11
 DNS server: You should input the DNS server address provided by your ISP.
Otherwise, you can enter 192.168.1.1. Click “OK” to save the configurations.
3.2 Log in to the Router
1. To access the Router’s Web-based Utility, launch a web browser such as Internet
Explorer or Firefox and enter http://192.168.1.1. Press “Enter”.
2. The system will automatically choose the corresponding web language in accordance
with the Browser’s language. For example, if your Browser’s language is Spanish or other
languages, the router’s web language will display as Spanish.
3. If your Browser language is English, the router’s web language will be English.
3.3 Fast Internet Access
Two kinds of fast access methods are provided on the router’s web-based utility: ADSL
dial-up and DHCP.
If you select ADSL dial-up, you only need to enter the access account and access

11N Wireless Broadband Router User Guide
12
password as well as the wireless password, and then click “Ok” to complete the settings.
If you select DHCP, you only need to enter the wireless password and click “Ok” to
complete the settings.
The default access method is ADSL dial-up and the access account and access password
are the same as the ADSL dial-up account and password, which you can inquire your
broadband ISP. For other access methods, please refer to WAN settings in chapter 4.The
wireless password can only consist of 8 characters, the default is 12345678 and you can
modify it when necessary.
3.4 Fast Encryption
The router provides two encryption setting screens, one is simple and easy, the other is
advanced (For advanced setting, please refer to chapter 5.2).
Simple and easy screen:
Log on to the router’s web-based utility and you may set encryption for the router. The

11N Wireless Broadband Router User Guide
13
default adopts WPA-PSK mode and AES Algorithm. The default password is 12345678, as
shown below.
NOTE: The wireless password can only be 8 characters in length and the default
is 12345678, you can modify it when necessary.

11N Wireless Broadband Router User Guide
14
Chapter 4 Advanced Settings
4.1 System Status
System status screen allows you to view the router’s WAN port status and system status.
 Connection status: It displays the router’s WAN connection status.
Disconnected: It indicates the router’s WAN port hasn’t been connected with the
network cable.
Connecting: It indicates the router’s WAN port is obtaining IP address.
Connected: It indicates the Router is well connected with the ISP.
 WAN IP：IP address obtained from ISP.
 Subnet mask: Obtained from ISP.
 Gateway: Obtained from ISP.
 DNS server: Obtained from ISP.
 Alternate DNS server: Obtained from ISP.
 Connection type: It displays your current access method.

11N Wireless Broadband Router User Guide
15
 LAN MAC address：It displays the Router’s LAN MAC address.
 WAN MAC address：It displays the Router’s WAN MAC Address.
 System time：It displays the system’s updated time
 Connected client ：It displays the number of the connected computers(normally it
displays the number of clients whose IP addresses obtained via DHCP server)
 Software version：It displays the Router’s software version；
 Hardware version：It displays the Router’s hardware version.
4.2 WAN Settings
Virtual Dial-up (PPPoE)
 Mode: Show your current connection mode.
 Access Account: Enter the account provided by your ISP.
 Access Password: Enter the password provided by your ISP.
 MTU: Maximum Transmission Unit. It is the size of the largest data packet that can
be sent over the network. The default value is 1492. Do NOT modify it unless
necessary, but if a specific website or web application software cannot open or be
enabled, you can try to change the MTU value to 1450, 1400, etc.