Verizon JetPack MiFi8801L-987C User manual

Hotspot (Verizon JetPack MiFi) Instructions
All parts must be returned with the
device including:
•Original box and packaging
•Hotspot device
•Charger
•Instruction booklet
1 – Power button
2 – Screen (Displays device status)
3 – USB-C Port for connecting the charger cable
1. Charge the Verizon JetPack MiFi (Hotspot) device before using.
2. Make sure your computer, laptop or other remote device is turned on, plugged in
and charged.
3. Turn on the Hotspot (hold Power button for 3 seconds), Verizon on will appear on
the Hotspot screen. The Hotspot takes several minutes to power up.
4. Press the power button to toggle through menu options and find the hotspot’s
name and password.
5. On your computer, hover over the bottom task bar on the right hand side of the
screen (by clock), select Wi-Fi (A) and then click on the Wi-Fi box (B).
B
A

6. A pop up menu should appear. Click on your Hotspot’s name. It will start with
Verizon MiFi (for example Verizon MiFi8801L-987C). (C).
7. The first time you connect to the Wi-Fi Hotspot on your computer, you will be
prompted to enter a code number. The code number will appear on the Hotspot’s
screen. If necessary, push the power button to cycle through menu display. Enter
the code and in a few seconds the Hotspot should connect. This is the only time
you will be asked to enter a code, unless you switch to a different device.
8. You are now connected and ready to connect to your email, VPN, AVAYA
SoftPHone or other needed resource.
9. At the end of the day, disconnect from the Hotspot, log off your computer and
turn off your Hotspot (hold the Power button for 3 seconds).
Tips for a better Wi-Fi connection
•Place your Hotspot next to or close to your computer.
•Keep other wireless devices away from the Hotspot.
•Operating a Hotspot near a microwave oven (off or on) can slow down your
connection speed.
C