NOA & NANI Karlstad 8 Drawer Chest User manual

Karlstad 8 Drawer Chest
ID: 22824-2

Page 1
Hardware:
1
2
3
4
5
16
17
18
19
20
23
21
13
6
7
8
9
10
14
11
12
22
15
A22pcs 16pcs
96pcs
57pcs
21pcs
8pcs
16pcs
36pcs 1pc
30pcs
B
C
D
E
H
J
K
L
M
16
17
3x12mm
6x35mm
6x30mm
15x12mm
4x30mm
15x9.5mm
F
G
4x16mm
4x14mm
46pcs
2pcs
8pcs
(1)
(2)
24
2.5x12mm
300mm
300mm
x4
x4
Packing list
Carton A: Part 2+3+4+16*8+17*8+Hardware
Carton B: Part 1+5+6+7+8+9+10+11+12+13+14+15*4+18*4+19*4+20*4+21*4+22*4+23*4+24
Packing List
Carton A : Parts : 2 | 3 | 4 | 16 * 8 | 17 * 8 & Hardware
Carton B : Parts 1 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15*4 |
18 * 4 | 19 * 4 | 20 * 4| 21 * 4 | 22 * 4 | 23 * 4 | 24

Page 2
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
NOTE
Please check you have all hardware before assembling.
If you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws and knobs are firmly secured.
Check that all bolts, screws and knobs are securely tightened at least every 4 months.
WARNING
If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.
DANGER
CHILDREN MUST BE SUPERVISED.

Step1
Step2
Page 3
H6pcs
3
2
B
B
B
G
2pcs
E
18pcs
B
B
B
EEE
H(2) H(2)
H(1)
H(2)
H(1)
x4
x4
B
57pcs
G
G
E
H(2)
H(2)
E
1
2
3
21
9
15

Step3
Page 4
H10pcs
E
30pcs
E
E
EE
E
E
H(2) H(2)
H(2)
H(2)
H(2)
H(2)
4
4
5
6
5
6
EEE
H(2)
EEE
H(2)
EEE
H(2)
EEE
H(2)
EEE
H(2)
EEE
H(2)

Step4
Step5
Page 5
L
C
1pc
A2pcs
A
A
L
C1pc
2
4
9
10
11

Page 6
Step6
Step7
C
C
C
C
C
C
A
A
A
A
A
A
C3pcs
A2pcs
C3pcs
A4pcs
2
2
3
4
4
7
7
8
9
9
8
10
11
10
11

Page 7
Step8
Step9
4pcs
A
A
F2pcs
A2pcs
C10pcs
A12pcs
F
F
F
F
F
C
AA
A
AC
C
C
1
2
2
3
4
5
6
A
F
F

Page 8
Step10
Step11
K30pcs
4pcs
C4pcs
F
C
C
C
C
F
F
F
F
K
K
1
1
3
3
13
14
12
13
14
24
10
11

Page 9
Step12
Step13
M
8pcs
F16pcs
J
8pcs
H
16pcs
E
48pcs
D16pcs
x4
x4
EE
H(1) H(1)
J
M
D
F
F
23
21
22
16
17
16 17
15
EEE
H(1)
J
M
21
D

DD
Page 10
Step14
Step15
x4
F20pcs
D20pcs
D
D
F
F
F
F
1
2
16
17
18
19
20
15

Page 11
Step16
Step17

Ensure that the runners on the cabinet are all the way to the front.
Details of Installing the Drawer
Steps for disassembly runner：move out the inside part to the end, press the plastic
upward and pull out until the runner to separate.
1
12
34

Hold the drawer horizontally and ensure the slide tracks are aligned to the runners.
Push the drawer gently inwards until you hear a soft click.
WARNING: Any uneven force used, or any component is out of place upon
installation of the drawer, will result in the damage of the rails.
In case of incorrect installation, gently press the plastic buttons (one side push up the
other side push down) to detach the slide track and pull out the drawer.
2

IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
Safety Information
All assembly fixings should be tightened properly and care should be taken that no fittings are loose. Regular
tightening of the bolts is recommended to extend the lifespan of the product. Please follow all the instructions when
assembling the product and do not use power tools when building.
Warning: The product should not be used if any structural part is broken or missing. If any part is missing or broken
report it and we will replace, do not attempt to fix the item or purchase additional parts not included with the bed;
this will invalidate the warranty.
Warning: Children can become trapped between the bed and the wall (or other parts of furniture). To avoid risk of
serious injury the distance between the top safety barrier and the wall/furniture shall not exceed 75mm or shall be
more than 230mm.
Warning: Children can strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a
bunk bed. Do not attach any such items to the product to prevent risk of serious injury.
Warning: High Beds and the upper bed of Bunk Beds are not suitable for children under 6-years due to the risk of
injury from falls.
The ventilation of the room the product will be placed in is necessary to keep low humidity and to prevent mould in
and around the bed.
Product Conformity
This product conforms to European Safety Standards - BS EN747:2012+A1:2015 Specification for Bunk Beds & High
Beds.
Mattress Requirements
Maximum thickness of mattress: 13.5cm, the max mattress thickness must not be over the maximum mattress
thickness marking marked on the upper bed. Recommended size of the mattress: Length 190cm *Width 90cm *Depth
13.5cm.
Return Information
If you have any problems with the item just email us at [email protected] and we can resolve it for you, our
technical team will be able to assist in helping. If you have any parts that are damaged we can replace them for you. If
you do need to return the item for some reason just email and request an RMA number and fill in the form on the
next page and we can arrange the return of the goods.
Assembly Information
We understand that self assembly furniture can be a pain but we try and make it as easy as possible for anyone to
build, if you have found a problem with the assembly of the product or with the assembly instructions or you have
comments on how we would improve them, we would love to hear from you. Just contact us either by email at
[email protected] or via Live Chat on our website noaandnani.co.uk
Related Items
We have a matching range of items that compliment this product, just head to noaandnani.co.uk for the full selection.
noaandnani.co.uk