
AM/PM
chair setup
1. Back Height
Lift the back of the chair to set the
height ofthe back rest so
that your back feels comfortably
supported.
2. 3D Adjustable Arms
Lift button on outside of arm for
height adjustment. Press button on
the inside of the arm pad for 3D
movement (sideways and forwards
and back).
3. Weight/Tension
Pull out the lever and turn clock-
wise to tighten the tension and
turn anti-clockwise to decrease.
4. Seat Height
Lift lever to adjust the height of the
chair and release when desired
position has been found.
5. Back Lock
Turn the lever clockwise to unlock
the back and ant-clockwise to lock.
6. Seat Slide
Lift lever and move seat forwards or
backwards to nd the right
position.
7. Seat Lock
Turn the lever clockwise to unlock
the back and ant-clockwise to lock.
8. Pump Up Lumbar
Squeeze the bulb until desired level
of lumbar support is reached.
9. Integral Headrest (where appro-
priate)
Adjust headrest by hand to change
the angle.
1.
9.
2.
6.
8.
5. 4.
3.
7.