Nonstop UV Station User manual
UV Station harnesses the same disinfecting power of the sun’s rays to safely and effectively
sanitize mobile devices, remote controls and other personal items. UV Station has been
meticulously engineered and tested to optimize the position of its seven UV-C bulbs, reflective
interior and quartz plate to optimize the exposure of devices to efficacious UV-C rays.
TM
Welcome.
Quick Start Guide
On the back of UV Station press down on the tabs to open
the door. Plug the included power adapter in the power jack
and route the cable through the notched opening on the
door. Close the door and secure shut with screw if desired.
Access the “Time Set” button behind the door on the back
of UV Station. Press the “Time Set” button to enter the time
setting mode. The hours digits on the display will flash.
On the front of UV Station, use the Dimmer button to
advance digits and the Clock button to decrease digits.
After setting the Hours, press the “UV” button to advance to
set Minutes then the Year, Month, Day and Auto Adjust for
Daylight Savings setting. NOTE: Auto DST is set to “on”
and can be disabled during the time/date setting process.
Open UV compartment lid and place item(s) into the
compartment. Ensure items are not touching the side walls
and if multiple items are placed inside be sure they do not
overlap or touch each other. Close the lid completely or the
cleaning cycle will not start.
Press “UV CLEAN” button. A beep will signal the start of the
five minute cleaning cycle and the countdown timer will
display the remaining time. When the cycle is complete a
long beep will sound and the “Clean” icon will light on the
display. NOTE: If the lid is opened during cleaning cycle the
cycle automatically shuts off for safety and user must start
a new cleaning cycle.
Qi wireless charging compatible phones can be charged by
simply setting them in the stand. Please ensure that the
back of phone is flush to the back of the stand. Most phone
cases can be left on while charging, but some phone cases
will need to be removed. (10W max output power)
The two USB ports can charge other devices such as
mobile phones, fitness bands, headphones, smart
watches and more. (2.4A max output power)
TM Quick Start Guide
Setup
For Help & More Information
Clean Charge
CONNECT TO POWER
SET TIME / DATE
PLACE ITEMS TO CLEAN
START CLEANING CYCLE
WIRELESS CHARGING
USB CHARGING
Scan the QR code or visit our site for
more information including a full user
guide, UV-C efficacy and safety here:
For assisitance, please contact:
www.nonstopproducts.com/get-uv-station
support@nonstopproducts.com
CLEAN
USB CHARGING PORTS
Qi WIRELESS CHARGING STAND
LIFT LID AND PLACE ITEMS
INTO COMPARTMENT
TAP TO START CYCLE
CLOCK DISPLAY
ON/OFF
ADJUST DISPLAY
BRIGHTNESS
CLEAN
CYCLE COUNTDOWN
TIMER DISPLAY
TAP TO ACCEPT SETTING AND
ADVANCE TO NEXT SETTING.
HOUR → MIN → YEAR → MONTH →
DAY → AUTO DST ADJUST
ADJUST SETTING +
ADJUST SETTING -
BACK OF UV STATION
ACCESS DOOR
POWER JACK
NOTCH FOR POWER
ADAPTER CABLE
TIME SET BUTTON
CYCLE COUNTER BUTTON
TM
Designed in California.
Nonstop, Inc. 200 South Virginia Street, FL 8, Reno NV 89501
support@nonstopproducts.com
For More Information
www.nonstopproducts.com
LEARN MORE
Please scan QR code
with camera app to
view user guide and
safety information
