North Edge EVOQUE User manual

Safety tips-please read them carefully before using
1.How to guide
1.1 Maintenance
Storage: please place the product in a cool place, do not place in
dangerous environment, extrusion, pressure, high temperature, low
temperature, high humidity, easy to fall, hard hit, etc. .
Do not remove the watchcase by yourself
1.2 how to use
Before use: Please make sure the power supply is sufficient
Do not give the product to children under 8 years of age.
This product is made of non-toxic materials. If any discomfort
occurs during use, please remove the product and seek professional
medical advice.
Wear the product on your wrist and be aware of the risks
associated with wearing it in a way that suits you or is comfortable
for you.
If you do not understand the information please be sure to contact ,
the purchase of dealers and business representatives or to ask us.
- 1 -

2. Full display and identification, Key functions
A key
LIGHT
D key
+/START/STOP
C key
-/RESET
B key
MODE/SET
Solar charging function
LCD synchronize with hands time
Fully automatic calendar (2000~2099) week, month, day
12/24hour system
Alarm function
World time function (48 cities)
Countdown timer function
1/100 stopwatch function(Range: 99 hours 59 minutes 59.99 seconds)
Compass function
EL backlight
Key sound (When battery power is low, system will automatically prohibit
key sound, and no key sound in operation)
- 2 -
N
S
W
E

2.1General operation:
Click B to switch mode, as shown below:
1.5s B key 1.5S 1.5S1.5S B key B key
1.5S
See next page
Normal Time Date Stopwatch Countdown
- 3 -
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E

B key
B key B key 1.5s1.5S
Display for
1.5s in turn
D key
B key
World Time
Countdown
Alarm Clock
World Time
Compass
In any mode, press the A key to illuminate EL for 3 seconds
(When battery power is low, pressing A key and low battery power icon L
level will flash for 5 seconds)
- 4 -
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E

Hold B key for 3s
Normal time
B key
Time zone
B key
Hour
B key
Minute
Second
B key
Year
B key
Month
Day
B key
B key
Daylight Time
12/24hour system
- 5 -
2.2Normal Time and Date Settings
In normal time mode, hold down the B key for 3 seconds to
enter the time and date setting mode, press the B key to move
the setting item, the order is as follow:
B key

- 6 -
Press D or C key to select time zone.
Press D or C key to turn on or off the DST.
Press D or C key to select 12 or 24hour system.
Press D key to increase the value, hold down D key to increase
the value quickly.
Press C key to decrease the value, hold down C key to decrease
the value quickly.
Press D or C key can clear second to “0”, (The second in world
time will clear “0” synchronously.)
During the setting, hold down the B key for 2 seconds to confirm
and return to normal time mode
If no any key operation in 1 minute, it will confirm and return to
normal time mode automatically.
Note: After adjusting the LCD digital time, the hands time will
change synchronously. If the battery power is low, the system
prohibits hands running automatically and hands time will not
change synchronously.
2.3Stopwatch Mode
Stopwatch timing range: 99 hours 59 minutes 59.99 seconds, when
reach the maximum limit, stopwatch will automatically stop timing
In stopwatch mode, press D key to start or stop. When it stops,
press C key to clear “0”.

D key D key D key D key
Press C key
to clear “0”
Clear “0” Start Stop Recovery Stop
- 7 -
Split time: When stopwatch is running, press C key to enter split time,
press D key to stop and display total time, then press C key to clear “0”.
Two players’ completion time: When stopwatch is running, press C key
to display completion time of player 1, press D key to start measurement
of completion time of player 2, then press C key to display completion
time of player 2, press C key to clear “0”.
D key C key C key D key
Press C key
to clear “0”
Clear “0” Start Midway
measurement
Release of Midway
Measurement
Stop
D key C key D key C key
Press C key
to clear “0”
Clear “0” Start The first player
measured
Showing player 1
completion time
Keep showing player 1
completion time
Measuring
second player
Show second player
completion time
Split timing
Stopwatch mode
Completion time of two players

- 8 -
Countdown Start
Countdown to "0"
Stop
D key
After alarm
D key
Hold C key for 3s
2.4 Countdown Mode
Countdown range :99 hours 59 minutes 59 seconds
In countdown function mode, click D to start or stop
When the countdown stops, hold down the C key and value
flash for 3 seconds, then return the set value
When the countdown time reaches "0:0000", it will ring for 10
seconds, press any key to stop the alarm and the countdown time
will automatically return to the set value
Note: When battery power is low, system prohibits alarm automatically,
there will be no alarm sound when countdown to “0”, at the same time,
the low battery power icon L level will flash for 10 seconds.
Countdown Setting:
When the countdown stops, hold down the B key for 3 seconds to
enter the countdown setting, press the B key to select the
adjustment item, the order is as follow:

- 9 -
Hold B key
for 3s B key B key
B key
Countdown Time
Setting
Hour Minute Second
Hold B key for 2s
Press D key to increase the value, hold down D key to increase the
value quickly.
Press C key to decrease the value, hold down C key to decrease
the value quickly.
During the setting, press B key for 2s to confirm and return to
countdown mode.
If no any key operation in 1 minute, it will confirm and return to
countdown mode automatically.

- 10 -
C key
C key
C key
C key
C key
C key
D key
D key
D key
D key
D key
D key
Hourly Chime ON Hourly Chime OFF
Alarm 1 OFF
Alarm 2 OFF
Alarm 3 OFF
Alarm 4 OFF
Alarm 5 OFF
Alarm 1 ON
Alarm 2 ON
Alarm 3 ON
Alarm 4 ON
Alarm 5 ON
2.5Alarm Mode
Alarm ON or OFF:
Press the C button in alarm mode to select 5 sets of alarm clocks
and hourly chime, press the D button to turn ON or OFF the alarm
as shown below:

- 11 -
Hold B
key for
3s
Alarm Mode
B key
Hour Minute
Hold B key for 2s
Alarm setting
In alarm 1 to alarm 5 modes, hold down the B key for 3 seconds
to enter the setting mode, press the B key to select the setting
item, the order shown below:
Press D key to increase the value, hold down D key to increase the
value quickly.
Press D key to increase the value, hold down D key to increase the
value quickly.
During the setting, press B key for 2s to confirm and return to alarm mode.
It will return to alarm clock mode if no any key operation in one minute.
If the alarm is turned ON, it will alarm for 20 seconds and the alarm
time will flash when reach alarm time. Press any key to stop alarm.
If the alarm is turned ON, it will alarm for 20 seconds and the alarm
time will flash when reach alarm time. Press any key to stop alarm.

- 12 -
Showing 1.5
seconds in turn
Showing 1.5
seconds in turn
Showing 1.5
seconds in turn
Look backward
the time zone
Current time zone Look forward
the time zone
D key
C key
D key
Hold A
key for 3s D key
World Time
A key
Daylight Saving Time ON Daylight Saving Time OFF
C key
2.6World Time Mode
In world time mode, press the C or D key to view different city
time as shown below:
Daylight saving time ON and OFF:
In world time mode, press and hold the A key for 3 seconds to
enter daylight saving time setting mode, press the D key to turn
ON or OFF daylight saving time as shown below:
Hold down the D or C key to quickly change the time zone
It will return to world time mode automatically if no any key operation
in one minute.

- 13 -
World Time Flash for 3s
Convert to normal time
Hold B key
for 3s
D key
Compass mode Compass measurement
Setting world time to normal time (local time):
In world time mode, hold down the B key for 3s and convert the
world time to normal time as follows:
2.7Compass Mode
Direction measurement by pressing
the D key in compass mode
Place the watch horizontally, the minute hand pointing north, the
hour hand pointing south.
Turn the watch to make it display “N”, the 12H direction is north
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E

- 14 -
The following table illustrates the meaning of abbreviations in
Direction Meaning Direction Meaning Direction Meaning Direction Meaning
N North NNE North -
northeast NE Northeast ENE East
-
northeast
E East ESE East -
southeast SE Southeast SSE South
-
southeast
S South SSW South -
southwest SW Southwest WSW West
-
southwest
W West WNW West -
northwest NW Northwest NNW North
-
northwest
If no any key operation in 1 minute, it will exit measurement mode
automatically, then press D key to re-measure.
Remark: when battery power is low, the system prohibits
compass function. If enter compass mode, press D key and the
low battery power icon L level will flash for 5s, the compass can’t
be used.

- 15 -
Hold B key
for 2s
After 1 minute
Compass
measurement
Calibration mode Complete calibration
D/C key Turn 2
circles
Compass Correction Mode (OFF CAL)
When the compass is first used, a correction is required as follow:
In compass mode, hold B key for 2s to enter (OFF CAL)
calibration mode. Pressing D or C key, then turn watch slowly,
clockwise or anticlockwise are both ok. After turning for 2 circles in
the same direction, the watch will exit calibration mode and return
to compass measurement mode. Note: After changing battery, the
first time you use compass, it will enter automatic calibration
mode. Please turn the watch more than two circles according to
the above method to calibrate compass.
In calibration mode, if no any key operation in 1 minute, it will
exit automatically and return to measurement mode
Note: When battery power is low, the system prohibits compass
function. If enter compass mode, press A key and low power icon L
level flash for 5s and can’t enter calibration mode.
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E

- 16 -
Compass
Measurement
Press D or C key
to adjust deviation
Digital Correction Mode
Complete calibration
Hold A
key
for 2s
1 minute
B key
Digital Correction Mode (DEC)
After the above (OFF CAL) correction, if there is still a deviation,
you can follow the below method for digital correction
In compass mode, press A key for 2s to enter (DEC) digital
calibration mode, press D key to make the setting value plus 1,
press C key to make the setting value minus 1.
Maximum correction angle range ±90°(" W ""E "±90°)
Hold B key to confirm calibration value and return to
measurement mode.。
In digital correction mode, if no any key operation in 1 minute,
it will exit automatically and return to measurement mode
Note: When battery power is low, the system prohibits compass
function. If enter compass mode, pressing A key, low power icon
L level flash for 5s and can’t enter calibration mode.
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E

- 17 -
Normal time Hour hand
adjustment Minute hand adjustment
Hold A
key for
2s
Hold A
key for
1s B key
Hands Correction
When the hand time is inconsistent with the digital display time,
the following method can be used to correct it.
In normal time mode, hold down the A key for 3 seconds to enter
hands correction at 12:00 state.
Press the D key to adjust the hand to forward one step, hold down
the D key for quick adjustment, release the D key to stop
Press the C key to adjust the hand back 1 step, hold down the C key
for quick adjustment, release the C key to stop.
Press the B key to convert the hour hand or minute hand.
Adjust the hand to 12:00 and press the A key to confirm, the
hand time will automatically synchronize with the digital time.
Note: When battery power is low, the system prohibits hands
correction function. In normal time mode, hold A key and there
is low power icon L level flash for 5 seconds, can’t enter hands
correction mode.
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E
Press the D or C key to adjust hands to 12H
A key

- 18 -
Level 3
Ultra-low
Level 2 Level 1
Each take turn showing for 1.5s
2.8Battery Power Checking
In normal time mode, press and hold the C and D keys at the same
time to display battery power for 2s. If the power is at level 2 and level
3, all functions can be used.
When battery power is at level L, the hands will return to 12:00. At
the same time, the low power icon L level will flash for 1 minute(press
any key the LCD will display normal time)
When battery is at level L, system will automatically disable the key
sound, alarm sound, countdown sound and hands correction, compass
correction, compass, these functions can’t be used.
When battery is ultra-low, low voltage symbols and prompt
charging characters(CHARGE) flashing for 30s in turn, which
means power will be running out. LCD display entering sleep state.
Press any key, the low voltage symbols and prompt charging
When the battery runs out, all functions of this watch will stop.
After charging, functions can resume work, but all data stored in
the watch will disappear. Therefore, you must reset the time and
date after charging
Note: If you find the hands can’t back to 12:00 at low power, you
must correct hands back to 12:00 after charging for normal use.

- 19 -
3.Solar battery Description
Solar battery is installed to generate electricity by using light
energy and can store the generated energy into the built-in
battery. Usually the battery does not need to be replaced, but
after several years of use, its charging capacity will gradually
decrease and it can’t be fully charged. If you find that the
battery can’t be fully charged, you can only replace the battery
model as Panasonic (CTL1616); replacing the battery will delete
all the information in this watch memory.
Checking the battery indicator can display the battery power state
Power ultra-low indicator is used to represent the battery
power is very low. It will automatically enter the sleep state to
save power after flashing for 30 seconds. Press any key to
restore 30s flashing display, which remind you that you must
immediately place it in light for charging.
When the batteries run out, all functionality will be stopped.
After charging, every function can resume operation, but all
data stored in the watch will disappear. Therefore, after
charging to level M, you must reset the time and date, and
calibrate the hands and compass.
4.Operation caution:
When the watch is fully charged, in total darkness, it will run
about 1.5 months
After 1.5 months of storage in a dark place, the watch must be
charged at least above M level and re-setting the correct time
before use

- 20 -
5.Charging time refer to the following tables 1
Illumination
One day
usage power
Half battery
power charging
Fully battery
power charging
2500LUX
(charging about 20 cm
under 13 incandescent
lamps)
1.49hours
42.2hours
84.4hours
5000LUX
(about indoor
window
charging)
49minutes
23.2hours
46.4hours
10000LUX
(charging around
outdoor shade)
25minutes
11.8hours
23.6hours
50000LUX
(charging around
sunny outdoors)
7minutes
6hours
14hours
6.Attention to Charging
In some cases, charging causes overheating in this watch, please
avoid placing this watch in below place for battery charging.
Car dashboard exposed to direct sunlight
Car dashboard exposed to direct sunlight
Note that the temperature of this watch overheating will cause
the LCD screen extinguished, after the watch temperature
decrease, it should return to normal display.
Charging the battery directly under the sun will cause the watch
to be hot. Please take care to avoid scalding.
7.Important Tips:
Long-term store this watch in a darkness place or covered by
clothing, its power will be exhausted. Please let it catch the
light as often as possible.