North Edge X-TREK User manual

R
X-TREK
I n s t r u c t i o n M a n u a l

01.Introduction
The product is a multi-fucntion GPS trainer watch which can
analyse the data of swimming, cycling,running etc.It can share
all data on cell phone through APP also. It combines GPS
tracker, GPS timing, training plan, heart rate,compass, bubble
level, gerlocation,support Andriod & iOS system, 5ATM
waterproof, USB charge, long standby.
Thank you for using our product, please read user guide
before using this product.
02.Basic features
1
● GPS function, bluetooth connection
● Triathlon data analysis: swimming, cycling, running
● Pedometer/ compass/bubble level/geolocation
● Heart rate measurement, maximum, minimumheart rate
remind function
● Support Andriod / iOS system
● USB charge, long standby

03. Button definition
2
(During sports mode,
running/cycling/training)
Turn on /off unit
Hold the “power” button for “2-3” seconds to turn
on/off unit.
04.Start
1.Turn on
When you first use this watch, please turn it on and
hold the “open/off” button for 2-3s to start. After
starting, the picture is shown.The display time
interface.
2.To enable your watch to work properly,please set
your personal information after the boot.
key Lock
Enter the"keylock"and choose to on/off the keylock.the watch will lock the
screen automatically when there is no keystroke operation within 30s after the
keylock is opened, and the lock number will be displayed
on the screen.Meanwhile press "LAP"and "OK" to
unlock the device.

3
Italiano
Espanol
Francais
2.1 Language Settings
2.2 Time setting
1) In the time interface, press “OK” button to enter the function mode.
2)Press “Up” or “Down” to select “Settings” and press “OK” to enter.
By analogy, enter system Settings and display language items.
3) Press the “OK” button to accept your choice. Press the “Lap” key
to return to the top option.
1) In the time interface, press “OK” button to enter the function mode.
2) Press “Up” or “Down” to select “Settings” and press “OK” to enter.
In turn, enter “SYSTEM”/ “Clock” / “Time” options.
3) In the time setting,press the“Up”or“Down”to switch the connection

1) In the time interface, press “OK” button to enter the function mode.
2) Press “Up” or “Down” to select “Settings” and press “OK” to enter.
3) Press “Up” or “Down” to select “personal” and press “OK” to enter.
4) Press the “Lap” key to return to the top option.
176 bmp 080 kg
4
Swimming po ol
50m
2.3 Personal Settings
GPS/ manual setting and press “OK” to enter.
4) When the watch isn’t linked GPS or choose custom, setting time
by yourself.
5) When setting it by yourself, pressing the “Up” or “Down”, buttons
to change the number. Then pressing the “OK” button to accept your
setting and go to next option.Press the “Lap” key to return to the top
option.

1.In the time interface, press "OK" button to enter the function mode.
2.Press the “Up” or “Down” button to choose your function modes,
Running Cycling / Training / Records / History / Setting.
3. Press the “OK” button to accept your choice.
4. Press the “Back” button to go back to the watch mode from any
function modes.
CYCLING
RUN N I NG
SWI M MING J OGGING
SETTI N GS
HISTORY
RECOR D S
5
NAVIGATION
TRAINING
5.Function Mode:
5-1.Running:Running Mode
5-2.Cycling:Cycling Mode
5-3.Swimming:Swimming Mode
5-4.Training:Running and Cycling
5-5.Records:Records Mode
5-6.Triathlon:swimming, cycling,
running data analysis
5-7.History:Running/cycling/swimming/Jogging training plan mode.
5-8.Navigation:50 anchor pointcan be set up navigation
5-9.Setting: Setup Mode
TRIATHLON

6
Navigation
office
Bus station
Taxi station
Restaurant
Airport
Home
Target
Custom
Heart rate
Gas station
(GPS icon flicker)
Low charging
(GPS icon not flicker)
Link Bluetooth

1. Under the time interface, press "OK" to enter
the running mode.
2.Press the “Up” or “Down” to select the
running mode, Press“OK”to enter the movement
mode interface, and then select Outdoor GO or
Indoor GO according to “Up” or “Down”.
3. Press “OK” button to accept your choice.
4. Displayed information varies on exercise
mode and preference. Refer to “Setting”
section for more information.
RUNNING
1.GPS signal is OK, Select Outdoor GO, press the “OK” button to
start running,and press “Up” or “Down” to enter the moving interface
as shown in the figure.
2. When GPS is not linked, the watch is displayed the notification.
1. Select Indoor GO,Press the “OK” button to run,press the “OK”
button to start running,and press “Up” or “Down” to enter the moving
interface as shown in the figure.
2.When GPS is not linked,
the watch is displayed the
notification.
Indoor GO
Outdoor GO
7
K
m
Timer
0:20:08
Distance
0.00
Speed
0.0
K
p
h
K
m
K
p
h
Calories
0
Avg.speed
0.0
Stride Rate
34
K
p
m
S
p
m
K
C
A
L
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0
b
p
m
b
p
m
K
p
m
S
p
m
K
C
A
L
b
p
m
b
p
m
Outdoor GO
Indoo r GO
Outdoor GO
Indoo r GO
Timer
0:20:08
Distance
0.00
Speed
0.0
Calories
0
Avg.speed
0.0
Stride Rate
34
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0

1.In the time interface, press "OK" button to
enter the function mode.
2.Press the “Up” or “Down” to select the
cycling mode,Press“OK”to enter the outdoor
GO.
3. Press the “OK” button to accept your choice.
4. Displayed information varies on exercise
mode and preference. Refer to “Setting”
section for more information.
CYCLING
1.GPS signal is OK, Select Outdoor GO, and then pushing the “OK”
button to cycle,and press “Up”or“Down” to enter the moving interface
as shown in the figure.
2. When GPS is not linked, the watch is displayed the notification.
Outdoor GO
8
K
m
K
p
h
K
p
h
K
C
A
L
b
p
m
b
p
m
Outdoor GO Timer
0:20:08
Distance
0.00
Speed
0.0
Calories
0
Avg.speed
0.0
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0

1. In the time interface, press "OK" button to
enter the function mode.
2. Press the “Up” or “Down” to select the
swimming mode, Press“OK”to enter the
movement mode interface, and then select
Outdoor GO or Indoor GO according to “Up”
or “Down”.
3. Press the “OK” button to accept your choice.
4. Displayed information varies on exercise
mode and preference. Refer to “Setting”
section for more information.
SWIMMING
1. GPS signal is OK, Select Outdoor GO, and then pushing the “OK”
button to run,Select Outdoor GO, and press “Up”or“Down” to enter
the moving interface as shown in the figure.
2. When GPS is not linked, the watch
is displayed the notification.
Outdoor GO
9
Indoor GO
1. Select Indoor GO,Press the “OK” button to run,Select Outdoor GO,
and press “Up”or“Down” to enter the moving interface as shown in the
figure.
2. When GPS is not linked, the
watch will display a warning.
Cant’t operate this
device in the water.
K
m
K
p
h
K
m
K
p
h
K
p
h
K
C
A
L
K
p
h
K
C
A
L
Outdoor GO
Indoo r GO
Timer
0:20:08
Distance
0.00
Speed
0.0
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0
Outdoor GO
Indoo r GO
Timer
0:20:08
Distance
0.00
Speed
0.0
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0

1.In the time interface, press "OK" button to
enter the function mode.
2.Press the “Up” or “Down” to select the
jogging mode,Press “OK” to enter the
movement mode interface, and then select
Outdoor GO or Indoor GO according to “Up”
or “Down”.
3. Press the “OK” button to accept your choice.
4. Displayed information varies on exercise
mode and preference. Refer to “Setting”
section for more information.
Jogging Mode
JOGGING
1.GPS signal is OK, Select Outdoor GO,and then pushing the “OK”
button to run,Select Outdoor GO, and press “Up”or“Down” to enter
the moving interface as shown in the figure.
2. When GPS or Heart rate sensor is not linked, the watch is
displayed the notification.
1.Select Indoor GO,Press the “OK” button to run,Select Outdoor GO,
and press “Up”or“Down” to enter the moving interface as shown in
the figure.
2.When GPS or Heart rate
sensor is not linked, the
watch is displayed the
notification.
Indoor GO
Outdoor GO
10
K
m
K
p
h
K
p
h
S
p
m
K
C
A
L
b
p
m
b
p
m
Outdoor GO
Indoo r GO
Timer
0:20:08
Distance
0.00
Speed
0.0
Calories
0
Avg.speed
0.0
Stride Rate
34
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0
K
m
K
p
h
K
p
h
S
p
m
K
C
A
L
b
p
m
b
p
m
Timer
0:20:08
Distance
0.00
Speed
0.0
Calories
0
Avg.speed
0.0
Stride Rate
34
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0
Outdoor GO
Indoo r GO

Triathlon Mode
11
1.In the time interface, press "OK" button to
enter the function mode.
2.Press the “Up” or “Down” to select the
triathlon mode, press the "OK" button to
enter the swimming mode interface, and
then click “OK”.Select the key to choose
outdoor go.
3.Press the “OK” button to accept your choice.
PS: there are no Indoor go in the triathlon model.
TRIATHLON
1. GPS signal is OK, enter the swimming mode interface, press the
“OK” button to choose outdoor go, and start swimming, and press
“Up”or“Down” to enter the moving interface as shown in the figure.
2. When GPS or Heart rate sensor is not linked, the watch is
displayed the notification.
K
m
K
p
h
K
p
h
K
C
A
L
Outdoor GO Timer
0:20:08
Distance
0.00
Speed
0.0
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0
Swimming mode
Cycling mode
1. GPS signal is OK,In the swimming mode, press the "LAP" button
to enter the cycling mode for the 1 time and start riding.and press
“Up”or“Down” to enter the moving interface as shown in the figure.
2. When GPS or Heart rate sensor is not linked, the watch is
displayed the notification.
K
m
K
p
h
K
p
h
K
C
A
L
b
p
m
b
p
m
Timer
0:20:08
Distance
0.00
Speed
0.0
Calories
0
Avg.speed
0.0
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0

K
m
Timer
0:20:08
Distance
0.00
Speed
0.0
K
p
h
Calories
0
Avg.speed
0.0
Stride Rate
34
K
p
m
S
p
m
K
C
A
L
Current Time
0:37:10
Heart Rate
0
Avg.Heart Rate
0
b
p
m
b
p
m
1. GPS signal is OK,In the swimming mode, press the "LAP" button
to enter the cycling mode for the 2 time and start running.and press
“Up”or“Down” to enter the moving interface as shown in the figure.
2. When GPS or Heart rate sensor is not linked, the watch is
displayed the notification.
PS: The triathlon mode is a circular record of data. When you have
a cycle (swimming/cycling/running), press the "ok" button to enter
the timer stop page and press "up" or "down" to save, discard, or
move on.
Running mode
12

Training Mode - Create a New Plan
TRAINING
Cycling
Running
1.In the time interface, press "OK" button to
enter the function mode.
2.Press the “Up” or “Down” to select the
Training mode,Press“OK”to enter the movement
mode interface, and then select Running、
Cycling、Swimming or Jogging mode according
to “Up” or “Down”..
3. Press the “OK” button to accept your choice.
4. Training program design with personalized and Flexibility
4-1. Setting each steps with planning function User can easy setting
multi-plans or single-plan .
5. Displayed information varies on exercise mode and preference.
Refer to “Settings” section for more information.
13
Go
Edit Distance
Run
Time
Run
K c a l
60 min 500Kcal
Run
Create a new pian
Swimm ing
Joggi ng
1. Select the running mode,press “OK” to enter the “GO” and “Edit”
interface.“Up” or “Down” switch to “Edit” and press “OK” to enter the
time.Set the interface, press “OK” to select the value, press “Up” or
“Down” to add or subtract value.
2. Click “Up”or“Down”to switch Settings (distance/calorie) and press
“OK”.Select values to add or subtract values from the top page or the
next page.
3. Press “LAP” button to return to the mode interface twice.

Training Mode- Play, Edit the Plan & Edit, Delete & Insert the Step
Go
Edit
Go
Edit
Play the Plan
Edit the plan
1.Press the “OK” button to enter the plan, and then choose the “GO”
icon to play the plan.
2. Press the “Up” or “Down” buttons to choose your activity,Outdoor
GO or Indoor GO. (Refer to the user manual of “Running mode” or
“Cycling mode” for setting)
3. Press the “OK” button
to accept your choice.
1.Press the “OK” button to enter the plan, and then choose the “Edit”
icon to edit the plan.
2. Press the “Back” buttons to go back to previous page.
3. Press the “OK” button to accept your choice.
14
Run Run Run
80Km
Outdoor GO
Indoor GO
Run P n 01
RUNNING
CYCLING
SWIMMING
JOGGING
Distance Kcal
500Kcal
Time
60min
RUNNING
CYCLING
SWIMMING
JOGGING

Lap
SE TT IN GS
Sport Screens
Sport Alert
Smart Pause
Smart Lap
Smart Scroll
Lap
k
m
Smart Lap
Mark Lap during recording
Running
Cycling
Swimming
Jogging
Personal
0:10:45
Lap Distance
Lap Timer
1.30
1
Laps can marked by two ways.
1. Smart Lap can automatically mark laps based on a defined
distance.
2. When recording, press the “LAP” button to mark lap.
1. Smart Lap is in is in the Running/Cycling/Swimming/Jogging mode
to perform, in the “setting” to enter the corresponding “setting” option
Settings: run/bike/swim/walking.
2. Press “Up” or “Down”to select “running Settings”and press “OK"
to enter.
3. Press “Up” or “Down”to select “wisdom circle” , and press “OK” to
enter.
4.Press “Up” or “Down” to switch “by Distance” or “manual”, and
press “OK” to enter the relevant Settings.
5. Press “Up” or “Down” to add or subtract values.
6. By Distance: Mark laps based on a defined by your setting, such
as Miles or miles.
1. When recording, press the
“LAP” button to mark lap.
2. Go back the recording
pageautomatically after
marking laps.
15
1.0 km
Smart Lap
by Distance
Timer
0:04:08
Distance
0.00
K
p
h
Timer
0:04:08
Distance
0.00
Speed
0.0

View the data during recording
SE TTINGS
Sport Screens
Sport Alert
Smart Pause
Smart Lap
Smart Scroll
Fast
Slow
Of f
Smart Scroll
Manually Operate
Running
Cycling
Swimming
Jogging
Personal
Calories 99
Avg. Speed
0.0
There are two ways to view this date during recording.
1. Smart Scroll can automatically scroll base on a defined setting.
2. Scroll pages can manually operated by pressing the “Up” or
“Down” button to view this data.
Displayed information varies on exercise mode and preference.
Refer to “Setting” section for more information.
1. Smart Scrol is in the running/Cycling/Swimming/Jogging mode, in
the “settings” into the corresponding “settings” option Settings.
2. Press “Up” or “Down”to Select “Running Settings”,and press “OK"
to enter.
3. Press “Up” or “Down” to select “Smart Scrol" and press “OK" to
enter.
4. Press “Up” or “Down” to select “Fast”, “Slow”or “off”.
5. Press “LAP” to return to the top option.
Press the “Up” or “Down”
button to view this data.
16
Smart Scroll
Fast
K
C
A
L
K
p
m
Stride Rate
29 S
p
m
Current Time
0:08:53
Heart Rate
0
Avg. Heart Rate
0
b
p
m
b
p
m
Timer
0:04:08
Distance
0.00

Timer Stopped
0:30:15
Timer Stopped
Save
Timer Stopped
Discard
Save
Resume
0:30:15
1. Press the “OK” button to enter the “Timer Stopped” function
during sport modes, Running, Cycling, Swimming, Jogging and
Training.
2. Press the “Up” or “Down” button to choose your needs, Resume
Save and Discard.
17
After storing the movement data, press the "OK" button to return to
the previous motion mode interface.
Press the “OK” button to resume your sport in “Timer Stopped”
function mode. Then pressing again to return the previous sport
mode.
Continue
Continue
Save
Discard
Timer
0:04:08
Distance
0.00
Timer
0:04:08
Distance
0.00

0:30:15
Timer Stopped
Discard
Discard
Cancel
Cancel
OK
Discard
18
Continue
Save
1. Choose “Discard” to pop up a dialog box, and then confirm whether
to enter the operation, Press “Up” or “Down”select to “cance” or “OK”
according to , and press “OK” to enter the option.
2. Choose “Cancel” to go back the previous page, and then choose
other functions, Resume or Save.
3. Choose “OK” to delete this sport data, and leave this sport mode.
Timer
0:04:08
Distance
0.00