Nova NX900 User manual

High efficient 2-Channel Class-H Power Amplifiers. English
Deutsch
User Manual
HX900 | HX1500 | HX2000 | HX4000

2 3
Important Safety Instructions
Read instructions before connecting
Limited Warranty
Information and Disclaimer!
For a period of one year from the date of delivery to the
original purchaser (as shown on the original invoice or
sales receipt), CRAAFT AUDIO GmbH warrants to the
ORIGINAL OWNER of each product (provided it was
purchased at an authorized NOVA Dealer) that it is free
of defects in materials and workmanship and that each
product will meet or exceed all factory published
specifications for each respective model. NOVA agrees
to repair or replace (at its discretion) all defective parts
at no charge for labor or materials; subject to following
provisions:
NOVA shall take no responsibility for repair or replacement
as specified under this warranty, if the damaged product
has been subject to misuse, accident, neglect or failure
to comply with normal maintenance procedures; or if the
serial number has been defaced, altered or removed.
Nor will NOVA accept responsibility for, or resulting from,
improper alterations or unauthorized parts or repairs.
This warranty does not cover any damage to speakers or
any other consequential damage resulting from breach of
any written or implied warranty. NOVA will remedy any
defect, regardless of the reason for failure (except as
excluded) by repair, or replacement. NOVA will remedy
the defect and ship the product within a reasonable
time after receipt of the defective product at an authorized
NOVA Service Center. In the case that an NOVA product
requires service, the owner must contact NOVA or an
authorized NOVA Service Center to receive an R.A.N.
(Return Authorization Number) and instructions on how
to return the product to the authorized NOVA Service
Center, or to the factory. NOVA (or its Authorized Service
Center) will initiate corrective repairs upon receipt of the
returned product. Please save original carton and all the
packing materials in case shipping is required. All
products being returned to the factory or service center
for repairs must be shipped pre-paid.
If the repairs made by NOVA or the authorized NOVA
Service Center are not satisfactory, the owner is
instructed to give written notice to NOVA. If the defect
or malfunction remains after a reasonable amount of
attempts by NOVA to remedy the defect or malfunction,
the owner shall then have the option to elect either a
refund or replacement of said NOVA product free of
charge. The refund shall be an amount equal to but
not greater than the actual purchase price, not including
any taxes, interest, insurance, closing costs and other
finance charges (minus reasonable depreciation on the
product). If a refund is necessary, the owner must make
the defective or malfunctioning product available to
NOVA free and clear of all liens or other restrictions.
NOVA reserves the right to modify or change equipment
(in whole or part) at any time prior to delivery thereof, in
order to include therein electrical or mechanical
improvements deemed appropriate by NOVA; but without
incurring any liability to modify or change any equipment
previously delivered, or to supply new equipment in
accordance with any earlier specifications.
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL
DAMAGES YOU, THE OWNER, IS NOT ENTITLED TO
RECOVER FROM NOVA ANY INCIDENTAL DAMAGES
RESULTING FROM ANY DEFECT IN THE NOVA
PRODUCT. THIS INCLUDES ANY DAMAGE TO
ANOTHER PRODUCT OR PRODUCTS RESULTING
FROM SUCH A DEFECT.
No person has the authority to enlarge, amend, or modify
this warranty rules. This warranty is not extended by the
length of time which the owner is deprived of the use of
product. Repairs and replacement parts provided
pursuant to the warranty shall carry only the non-expired
portion of the warranty.
THIS STATEMENT OF WARRANTY SUPERSEDES ALL
OTHERS CONTAINED IN THIS MANUAL.
We continually engage in research related to product
improvement. Materials, production methods and design
refinements are introduced into existing products. Any
current NOVA product may differ in some respect from its
published description, but will always equal or exceed the
original design specifications unless otherwise stated.
Limited liability on contents. Subjects to be changed
without prior notice.
Speaker stands, distance rods, cables and other
accessories are available as option (not included).
Wichtige Sicherheitshinweise!
Bitte vor Gebrauch lesen und aufbewahren!
• Save these instructions for later use!
• Follow all warnings and instructions marked
on the product!
• Do not use this product in the near of water, i.e.
swimming pool, wet basement, etc.
• Read all of these instructions clearly!
• Do not place this product onto a instable stand or
table. The product may fall down, causing damage
to the product or to persons!
• Slots and holes in the cabinet and the electronic
modules are provided for ventilation; to ensure
reliable operation of the product, do not cover any
slots or holes.
• This product should not be placed in the near
an ofen or any other hot units.
• Use only the attached (original) power mains cable.
In case of questions about power supply or cable,
please ask your local NOVA dealer.
• Do not cover or damage the power mains cable.
• In case of damaged cables, do not use them at all.
• The power mains cable should be unplugged if the
unit is not used for longer time.
• Never push any objects into this product.
Dangerous (high) voltage points could result in
risk of fire or electrical shock. Do not spill any liquid
on the product.
• Do not try to service this product by yourself.
Opening or removing covers may expose you to
dangerous (high) voltage or other risks. All service
should be handeled by qualified service personnel only.
• Clean only with dry clothes.
• In case of any problems, unplug the product from the
mains supply immediately.
• Contact qualified service personnel in following cases:
• If the mains power cable or plug is damaged.
• If liquid has been spilled into the product.
• If the product has been exposed to water.
• If the product does not operate normally according
this manual.
• If the product has been dropped (damaged chassis).
• Exposure to extremely high volume levels may cause
a permanent hearing loss.
• Individuals vary considerably in susceptibility to noise
induced hearing loss, but nearly everyone will lose
some hearing if exposed to sufficiently intense noise
for a sufficient time. The U.S. Government´s
Occupational Safety and Health Administration
(OSHA) has specified the following permissible
noise level exposures:
Duration Per Day
In Hours
8
6
4
3
2
11/2
1
1/2
1/4 or less
• According to OSHA, any exposure in excess of the above
permissible limits could result in some hearing loss.
• Ear plug protectors in the ear canals or over the ears
must be worn when operating this product in order to
prevent a permanent hearing loss if exposure is in excess
of the limits as set forth above. To ensure against
potentially dangerous exposure to high sound pressure
levels, it is recommended that all persons exposed to
equipment capable of producing high sound pressure
levels such as this amplification system be protected by
hearing protectors while this unit is in operation.
• Fuses: Replace with IEC 127 (5 x 20 mm) type and
rated fuse for only.
TO PREVENT THE RISK OF FIRE AND SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO MOISTURE OR RAIN.
DO NOT OPEN CASE; NO USER SERVICE-ABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL ONLY.
• The product has been manufactured according to IEC 60065.
• The user must follow the advice and warning comments
found in the operating instructions. The unit conforms to
Protection Class 1.
• Loudspeaker outputs can carry dangerous high voltage.
Connect of disconnect any speaker cable ONLY if the unit
is switched off and the unit is disconnected from the mains
power supply (wall socket).
• Do not interrupt the protective conductor connection.
MAINS CONNECTION:
• The set operating voltage must match the local mains
supply voltage.
PLACE OF INSTALLATION:
• The unit should be used only on a clean, horizontal
working surface.
• Keep away the product from moisture and dust.
• Do not place this product onto a instable stand or
table. The product may fall down, causing damage
to the product or to persons!
• Slots and holes in the cabinet and the electronic
modules are provided for ventilation; to ensure
reliable operation of the product, do not cover any
slots or holes.
• This product should not be placed in the near
an ofen or any other hot units.
• Keep away from direct sunlight..
WEEE Mark
If you want to dispose of this product, do not mix with general
household waste. There are separate collection systems for used
electronic products in accordance with legislation under the WEEE
Directive (Directive 2002/96/EC) and is effective only within the
European Union.
EU Declaration of Conformity
Version for European Union
This declaration applies to loudspeakers and amplifiers
manufactured by CRAAFT AUDIO GmbH and includes
the types listed below.
EU conformity of power amplifiers
HX900
HX1500
HX2000
HX4000
All production versions of these types are included,
provided they correspond to the original technical version
and have not been subject to any later design or
electromechanical modifications.
We herewith declare that said products are in conformity
with the provisions of the following EC directives including
all applicable amendments:
2006/95/EG, Low Voltage
2004/108/EG, Electromagnetic Compatibility
The following standards have been applied:
DIN EN 60065
DIN EN 55103-1:1996, classes E1 to E4
DIN EN 55103-2:1996, classes E1 to E4
CRAAFT AUDIO GmbH / Germany accepts responsibility
for this declaration.
Pocking, 15th May 2018
Mr. Heinz Schwarzmüller,
Managing Director / CEO
Sound Level dBA,
Slow Response
90
92
95
97
100
102
105
110
115
• Dieses Gerät wurde gemäß IEC 60065 hergestellt
und hat das Werk in technisch in einwandfreiem Zustand
verlassen. Für einen gefahrlosen Betrieb muss der Anwender
die Hinweise und Warnungen dieser Bedienungsanleitung
befolgen. Dieses Gerät entspricht der Schutzklasse I.
• DIE SICHERHEIT DES GERÄTES WIRD
NUR GEWÄHRLEISTET, WENN:
• Reparaturen von autorisierten NOVA-Servicestellen
ausgeführt werden.
• das Gerät in Übereinstimmung nach den Vorgaben dieser
Bedienungsanleitung verwendet wird.
WARNUNG:
• Wenn Abdeckungen oder Gehäuseteile entfernt werden,
können spannungsführende Bauteile freigelegt werden.
• Wartung sowie Reparatur am geöffneten Gerät unter
Spannung darf nur durch eine vom Hersteller autorisierte
Fachkraft (nach VBG 4) erfolgen, die mit den damit
verbundenen Gefahren vertraut ist.
• Lautsprecher-Ausgänge führen berührungsgefährliche
Spannungen. Verbinden Sie Lautsprecherausgänge mit
Lautsprechern mittels Kabeln nur im ausgeschalteten
Gerätezustand und nur mit dem original vom Hersteller
beigelegtem bzw. empfohlenem Netzkabel.
• Es dürfen nur Sicherungen vom Typ IEC 127 und der
angegebenen Nennstromstärke verwendet werden.
• Eine Verwendung von überbrückten Sicherungen sowie
ein Kurzschließen des Sicherungshalters ist verboten.
• Unterbrechen Sie niemals die Schutzleiterverbindung.
• Hohe Lautstärkepegel können dauerhafte Gehörschäden
verursachen. Vermeiden Sie deshalb die direkte Nähe
von Lautsprechern, die mit hoher Lautstärke betrieben
werden. Verwenden Sie einen Gehörschutz bei
dauernder Einwirkung hoher Pegel. NOVA, der Hersteller
bzw. der Inverkehrbringer übernimmt keinerlei Haftung
oder Verantwortung für Hörschäden und andere
gesundheitliche Schäden durch die Verwendung, den
Transport oder die Installation dieses Produkts.
NETZANSCHLUSS:
• Die Geräte-Betriebsspannung muss mit der
örtlichen Netzspannung überein stimmen.
• Der Anschluss an das Stromnetz darf nur mit
dem mitgelieferten Netzteil oder Netzkabel erfolgen.
AUFSTELLORT:
• Das Gerät sollte nur auf einer sauberen und wackelfreien
Fläche stehen.
• Das Gerät darf während des Betriebs keinen
Erschütterungen ausgesetzt sein.
• Setzen Sie das Gerät nicht Feuchtigkeit und Staub aus.
• Das Gerät darf nicht in der Nähe von Wasser oder anderen
Flüssigkeiten bzw. Behältnissen mit Flüssigkeiten jeglicher
Art betrieben werden. Stellen Sie niemals einen mit
Flüssigkeit gefüllten Gegenstand auf oder in direkte Nähe
des Gerätes.
• Sorgen Sie für ausreichende Belüftung des Gerätes.
• Eventuelle Belüftungsöffnungen dürfen nicht abgedeckt
werden.
• Vermeiden Sie eine direkte Sonneneinstrahlung und die
unmittelbare Nähe von Heizkörpern, Heizstrahlern
o.ä. Geräte.
• Betrieben oder transportieren Sie das Gerät nie auf einem
instabilen Wagen, Ständer, Dreifuß, Untersatz oder Tisch.
Beim Transport, Lagerung, Aufstellung sowie beim Betrieb
des Gerätes müssen die Anweisungen des Herstellers befolgt
werden.
• Zusatzvorrichtungen: Verwenden Sie niemals Zusatz-
vorrichtungen, die nicht vom Hersteller empfohlen wurden.
• Lagern Sie das Gerät über längere Zeit NUR stromlos
(Netzstecker sollte gezogen werden).
Wir behalten uns Änderungen der technischen Daten
im Rahmen der Produktverbesserung und Produktpflege
vor. Dabei legen wir größten Wert auf Kompatibilität und
Produkttreue. Wir behalten uns Änderungen jeglicher Art
vor. Keine Gewähr für Druckfehler.
Stative, Distanzrohre, Kabel und anderes Zubehör nicht
im Lieferumfang enthalten, soweit nicht anders angegeben.
Zubehör optional erhältlich.
Gewährleistung
Informationen und Haftungsausschluss
Für den Zeitraum eines Jahres, beginnend mit
Lieferdatum an den ursprunglichen Käufer
(abzulesen von der Rechnung bzw. Kassenbon),
gewährleistet die CRAAFT AUDIO GmbH für
jeden Neukauf, dass das Produkt sowohl vom
Material als auch in der Ausführung der Herstellung
in einwandfreiem Zustand ist. Der CRAAFT AUDIO
GmbH steht es frei zu entscheiden, unter Vorbehalt
kostenlos alle fehlerhaften Teile zu reparieren oder
zu ersetzen. Es wird keinerlei Haftung für Reparatur
oder Ersatz des Produkts übernommen, wenn
Schäden durch Installationsfehler oder
unsachgemäßen Gebrauch des Gerätes entstanden
sind, die Seriennummer beschädigt wurde oder
versucht wurde, diese zu ändern oder zu entfernen.
Die CRAAFT AUDIO GmbH übernimmt ebenfalls
keine Haftung für Schäden, die bei unsachgemäßen
Reparaturen und/oder Eingriffen entstanden sind.
Diese Gewährleistung deckt ebenfalls keine Schäden
an Lautsprechern oder Folgeschäden an jeglicher
angeschlossenen Peripherie, Personenschäden
oder anderen Primär- und Sekundärschäden ab,
die durch eine Nichteinhaltung der geschriebenen
bzw. stillschweigenden Gewährleistungsregelungen
entstanden sind. Falls ein NOVA Produkt Service
benötigt, sollte der Eigentümer des Gerätes ein
autorisiertes NOVA Service-Center kontaktieren.
Egal aus welchem Grunde, deckt eine Gewähr-
leistung die Instandsetzung oder den Austausch,
jedoch keinesfalls Schadensersatzansprüche in
irgendeiner Art auch nicht wegen Ausfallhonorar
oder anderem ab. Als Eigentümer und/oder
Anwender sind Sie nicht berechtigt, von der
CRAAFT AUDIO GmbH Schadensersatz zu
fordern, wenn Nebenschäden durch ein Produkt
aus dem Hause der CRAAFT AUDIO GmbH
entstehen. Dies schließt Folge- und/oder Neben-
schäden an anderen Produkten ein.
Die Gewährleistung darf nicht geändert werden
und wird nicht um einen Zeitraum erweitert, in
dem der Eigentümer oder Anwender das Produkt
nicht nutzen kann. Lediglich vom nicht abgelaufenen
Teil der Gewährleistungszeit betroffen sind
Reparaturen und Ersatzteile, die im Rahmen der
Gewährleistungsbestimmungen ausgeführt oder
getauscht wurden.
Diese Gewährleistungserklärung ersetzt alle
anderen Erklärungen, die in dieser oder anderen
oder vorherigen Ausgaben für dieses Gerät
enthalten bzw. vorhanden sind.
HX900 | HX1500 | HX2000 | HX4000

2 3
Important Safety Instructions
Read instructions before connecting
Limited Warranty
Information and Disclaimer!
For a period of one year from the date of delivery to the
original purchaser (as shown on the original invoice or
sales receipt), CRAAFT AUDIO GmbH warrants to the
ORIGINAL OWNER of each product (provided it was
purchased at an authorized NOVA Dealer) that it is free
of defects in materials and workmanship and that each
product will meet or exceed all factory published
specifications for each respective model. NOVA agrees
to repair or replace (at its discretion) all defective parts
at no charge for labor or materials; subject to following
provisions:
NOVA shall take no responsibility for repair or replacement
as specified under this warranty, if the damaged product
has been subject to misuse, accident, neglect or failure
to comply with normal maintenance procedures; or if the
serial number has been defaced, altered or removed.
Nor will NOVA accept responsibility for, or resulting from,
improper alterations or unauthorized parts or repairs.
This warranty does not cover any damage to speakers or
any other consequential damage resulting from breach of
any written or implied warranty. NOVA will remedy any
defect, regardless of the reason for failure (except as
excluded) by repair, or replacement. NOVA will remedy
the defect and ship the product within a reasonable
time after receipt of the defective product at an authorized
NOVA Service Center. In the case that an NOVA product
requires service, the owner must contact NOVA or an
authorized NOVA Service Center to receive an R.A.N.
(Return Authorization Number) and instructions on how
to return the product to the authorized NOVA Service
Center, or to the factory. NOVA (or its Authorized Service
Center) will initiate corrective repairs upon receipt of the
returned product. Please save original carton and all the
packing materials in case shipping is required. All
products being returned to the factory or service center
for repairs must be shipped pre-paid.
If the repairs made by NOVA or the authorized NOVA
Service Center are not satisfactory, the owner is
instructed to give written notice to NOVA. If the defect
or malfunction remains after a reasonable amount of
attempts by NOVA to remedy the defect or malfunction,
the owner shall then have the option to elect either a
refund or replacement of said NOVA product free of
charge. The refund shall be an amount equal to but
not greater than the actual purchase price, not including
any taxes, interest, insurance, closing costs and other
finance charges (minus reasonable depreciation on the
product). If a refund is necessary, the owner must make
the defective or malfunctioning product available to
NOVA free and clear of all liens or other restrictions.
NOVA reserves the right to modify or change equipment
(in whole or part) at any time prior to delivery thereof, in
order to include therein electrical or mechanical
improvements deemed appropriate by NOVA; but without
incurring any liability to modify or change any equipment
previously delivered, or to supply new equipment in
accordance with any earlier specifications.
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL
DAMAGES YOU, THE OWNER, IS NOT ENTITLED TO
RECOVER FROM NOVA ANY INCIDENTAL DAMAGES
RESULTING FROM ANY DEFECT IN THE NOVA
PRODUCT. THIS INCLUDES ANY DAMAGE TO
ANOTHER PRODUCT OR PRODUCTS RESULTING
FROM SUCH A DEFECT.
No person has the authority to enlarge, amend, or modify
this warranty rules. This warranty is not extended by the
length of time which the owner is deprived of the use of
product. Repairs and replacement parts provided
pursuant to the warranty shall carry only the non-expired
portion of the warranty.
THIS STATEMENT OF WARRANTY SUPERSEDES ALL
OTHERS CONTAINED IN THIS MANUAL.
We continually engage in research related to product
improvement. Materials, production methods and design
refinements are introduced into existing products. Any
current NOVA product may differ in some respect from its
published description, but will always equal or exceed the
original design specifications unless otherwise stated.
Limited liability on contents. Subjects to be changed
without prior notice.
Speaker stands, distance rods, cables and other
accessories are available as option (not included).
Wichtige Sicherheitshinweise!
Bitte vor Gebrauch lesen und aufbewahren!
• Save these instructions for later use!
• Follow all warnings and instructions marked
on the product!
• Do not use this product in the near of water, i.e.
swimming pool, wet basement, etc.
• Read all of these instructions clearly!
• Do not place this product onto a instable stand or
table. The product may fall down, causing damage
to the product or to persons!
• Slots and holes in the cabinet and the electronic
modules are provided for ventilation; to ensure
reliable operation of the product, do not cover any
slots or holes.
• This product should not be placed in the near
an ofen or any other hot units.
• Use only the attached (original) power mains cable.
In case of questions about power supply or cable,
please ask your local NOVA dealer.
• Do not cover or damage the power mains cable.
• In case of damaged cables, do not use them at all.
• The power mains cable should be unplugged if the
unit is not used for longer time.
• Never push any objects into this product.
Dangerous (high) voltage points could result in
risk of fire or electrical shock. Do not spill any liquid
on the product.
• Do not try to service this product by yourself.
Opening or removing covers may expose you to
dangerous (high) voltage or other risks. All service
should be handeled by qualified service personnel only.
• Clean only with dry clothes.
• In case of any problems, unplug the product from the
mains supply immediately.
• Contact qualified service personnel in following cases:
• If the mains power cable or plug is damaged.
• If liquid has been spilled into the product.
• If the product has been exposed to water.
• If the product does not operate normally according
this manual.
• If the product has been dropped (damaged chassis).
• Exposure to extremely high volume levels may cause
a permanent hearing loss.
• Individuals vary considerably in susceptibility to noise
induced hearing loss, but nearly everyone will lose
some hearing if exposed to sufficiently intense noise
for a sufficient time. The U.S. Government´s
Occupational Safety and Health Administration
(OSHA) has specified the following permissible
noise level exposures:
Duration Per Day
In Hours
8
6
4
3
2
11/2
1
1/2
1/4 or less
• According to OSHA, any exposure in excess of the above
permissible limits could result in some hearing loss.
• Ear plug protectors in the ear canals or over the ears
must be worn when operating this product in order to
prevent a permanent hearing loss if exposure is in excess
of the limits as set forth above. To ensure against
potentially dangerous exposure to high sound pressure
levels, it is recommended that all persons exposed to
equipment capable of producing high sound pressure
levels such as this amplification system be protected by
hearing protectors while this unit is in operation.
• Fuses: Replace with IEC 127 (5 x 20 mm) type and
rated fuse for only.
TO PREVENT THE RISK OF FIRE AND SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO MOISTURE OR RAIN.
DO NOT OPEN CASE; NO USER SERVICE-ABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL ONLY.
• The product has been manufactured according to IEC 60065.
• The user must follow the advice and warning comments
found in the operating instructions. The unit conforms to
Protection Class 1.
• Loudspeaker outputs can carry dangerous high voltage.
Connect of disconnect any speaker cable ONLY if the unit
is switched off and the unit is disconnected from the mains
power supply (wall socket).
• Do not interrupt the protective conductor connection.
MAINS CONNECTION:
• The set operating voltage must match the local mains
supply voltage.
PLACE OF INSTALLATION:
• The unit should be used only on a clean, horizontal
working surface.
• Keep away the product from moisture and dust.
• Do not place this product onto a instable stand or
table. The product may fall down, causing damage
to the product or to persons!
• Slots and holes in the cabinet and the electronic
modules are provided for ventilation; to ensure
reliable operation of the product, do not cover any
slots or holes.
• This product should not be placed in the near
an ofen or any other hot units.
• Keep away from direct sunlight..
WEEE Mark
If you want to dispose of this product, do not mix with general
household waste. There are separate collection systems for used
electronic products in accordance with legislation under the WEEE
Directive (Directive 2002/96/EC) and is effective only within the
European Union.
EU Declaration of Conformity
Version for European Union
This declaration applies to loudspeakers and amplifiers
manufactured by CRAAFT AUDIO GmbH and includes
the types listed below.
EU conformity of power amplifiers
HX900
HX1500
HX2000
HX4000
All production versions of these types are included,
provided they correspond to the original technical version
and have not been subject to any later design or
electromechanical modifications.
We herewith declare that said products are in conformity
with the provisions of the following EC directives including
all applicable amendments:
2006/95/EG, Low Voltage
2004/108/EG, Electromagnetic Compatibility
The following standards have been applied:
DIN EN 60065
DIN EN 55103-1:1996, classes E1 to E4
DIN EN 55103-2:1996, classes E1 to E4
CRAAFT AUDIO GmbH / Germany accepts responsibility
for this declaration.
Pocking, 15th May 2018
Mr. Heinz Schwarzmüller,
Managing Director / CEO
Sound Level dBA,
Slow Response
90
92
95
97
100
102
105
110
115
• Dieses Gerät wurde gemäß IEC 60065 hergestellt
und hat das Werk in technisch in einwandfreiem Zustand
verlassen. Für einen gefahrlosen Betrieb muss der Anwender
die Hinweise und Warnungen dieser Bedienungsanleitung
befolgen. Dieses Gerät entspricht der Schutzklasse I.
• DIE SICHERHEIT DES GERÄTES WIRD
NUR GEWÄHRLEISTET, WENN:
• Reparaturen von autorisierten NOVA-Servicestellen
ausgeführt werden.
• das Gerät in Übereinstimmung nach den Vorgaben dieser
Bedienungsanleitung verwendet wird.
WARNUNG:
• Wenn Abdeckungen oder Gehäuseteile entfernt werden,
können spannungsführende Bauteile freigelegt werden.
• Wartung sowie Reparatur am geöffneten Gerät unter
Spannung darf nur durch eine vom Hersteller autorisierte
Fachkraft (nach VBG 4) erfolgen, die mit den damit
verbundenen Gefahren vertraut ist.
• Lautsprecher-Ausgänge führen berührungsgefährliche
Spannungen. Verbinden Sie Lautsprecherausgänge mit
Lautsprechern mittels Kabeln nur im ausgeschalteten
Gerätezustand und nur mit dem original vom Hersteller
beigelegtem bzw. empfohlenem Netzkabel.
• Es dürfen nur Sicherungen vom Typ IEC 127 und der
angegebenen Nennstromstärke verwendet werden.
• Eine Verwendung von überbrückten Sicherungen sowie
ein Kurzschließen des Sicherungshalters ist verboten.
• Unterbrechen Sie niemals die Schutzleiterverbindung.
• Hohe Lautstärkepegel können dauerhafte Gehörschäden
verursachen. Vermeiden Sie deshalb die direkte Nähe
von Lautsprechern, die mit hoher Lautstärke betrieben
werden. Verwenden Sie einen Gehörschutz bei
dauernder Einwirkung hoher Pegel. NOVA, der Hersteller
bzw. der Inverkehrbringer übernimmt keinerlei Haftung
oder Verantwortung für Hörschäden und andere
gesundheitliche Schäden durch die Verwendung, den
Transport oder die Installation dieses Produkts.
NETZANSCHLUSS:
• Die Geräte-Betriebsspannung muss mit der
örtlichen Netzspannung überein stimmen.
• Der Anschluss an das Stromnetz darf nur mit
dem mitgelieferten Netzteil oder Netzkabel erfolgen.
AUFSTELLORT:
• Das Gerät sollte nur auf einer sauberen und wackelfreien
Fläche stehen.
• Das Gerät darf während des Betriebs keinen
Erschütterungen ausgesetzt sein.
• Setzen Sie das Gerät nicht Feuchtigkeit und Staub aus.
• Das Gerät darf nicht in der Nähe von Wasser oder anderen
Flüssigkeiten bzw. Behältnissen mit Flüssigkeiten jeglicher
Art betrieben werden. Stellen Sie niemals einen mit
Flüssigkeit gefüllten Gegenstand auf oder in direkte Nähe
des Gerätes.
• Sorgen Sie für ausreichende Belüftung des Gerätes.
• Eventuelle Belüftungsöffnungen dürfen nicht abgedeckt
werden.
• Vermeiden Sie eine direkte Sonneneinstrahlung und die
unmittelbare Nähe von Heizkörpern, Heizstrahlern
o.ä. Geräte.
• Betrieben oder transportieren Sie das Gerät nie auf einem
instabilen Wagen, Ständer, Dreifuß, Untersatz oder Tisch.
Beim Transport, Lagerung, Aufstellung sowie beim Betrieb
des Gerätes müssen die Anweisungen des Herstellers befolgt
werden.
• Zusatzvorrichtungen: Verwenden Sie niemals Zusatz-
vorrichtungen, die nicht vom Hersteller empfohlen wurden.
• Lagern Sie das Gerät über längere Zeit NUR stromlos
(Netzstecker sollte gezogen werden).
Wir behalten uns Änderungen der technischen Daten
im Rahmen der Produktverbesserung und Produktpflege
vor. Dabei legen wir größten Wert auf Kompatibilität und
Produkttreue. Wir behalten uns Änderungen jeglicher Art
vor. Keine Gewähr für Druckfehler.
Stative, Distanzrohre, Kabel und anderes Zubehör nicht
im Lieferumfang enthalten, soweit nicht anders angegeben.
Zubehör optional erhältlich.
Gewährleistung
Informationen und Haftungsausschluss
Für den Zeitraum eines Jahres, beginnend mit
Lieferdatum an den ursprunglichen Käufer
(abzulesen von der Rechnung bzw. Kassenbon),
gewährleistet die CRAAFT AUDIO GmbH für
jeden Neukauf, dass das Produkt sowohl vom
Material als auch in der Ausführung der Herstellung
in einwandfreiem Zustand ist. Der CRAAFT AUDIO
GmbH steht es frei zu entscheiden, unter Vorbehalt
kostenlos alle fehlerhaften Teile zu reparieren oder
zu ersetzen. Es wird keinerlei Haftung für Reparatur
oder Ersatz des Produkts übernommen, wenn
Schäden durch Installationsfehler oder
unsachgemäßen Gebrauch des Gerätes entstanden
sind, die Seriennummer beschädigt wurde oder
versucht wurde, diese zu ändern oder zu entfernen.
Die CRAAFT AUDIO GmbH übernimmt ebenfalls
keine Haftung für Schäden, die bei unsachgemäßen
Reparaturen und/oder Eingriffen entstanden sind.
Diese Gewährleistung deckt ebenfalls keine Schäden
an Lautsprechern oder Folgeschäden an jeglicher
angeschlossenen Peripherie, Personenschäden
oder anderen Primär- und Sekundärschäden ab,
die durch eine Nichteinhaltung der geschriebenen
bzw. stillschweigenden Gewährleistungsregelungen
entstanden sind. Falls ein NOVA Produkt Service
benötigt, sollte der Eigentümer des Gerätes ein
autorisiertes NOVA Service-Center kontaktieren.
Egal aus welchem Grunde, deckt eine Gewähr-
leistung die Instandsetzung oder den Austausch,
jedoch keinesfalls Schadensersatzansprüche in
irgendeiner Art auch nicht wegen Ausfallhonorar
oder anderem ab. Als Eigentümer und/oder
Anwender sind Sie nicht berechtigt, von der
CRAAFT AUDIO GmbH Schadensersatz zu
fordern, wenn Nebenschäden durch ein Produkt
aus dem Hause der CRAAFT AUDIO GmbH
entstehen. Dies schließt Folge- und/oder Neben-
schäden an anderen Produkten ein.
Die Gewährleistung darf nicht geändert werden
und wird nicht um einen Zeitraum erweitert, in
dem der Eigentümer oder Anwender das Produkt
nicht nutzen kann. Lediglich vom nicht abgelaufenen
Teil der Gewährleistungszeit betroffen sind
Reparaturen und Ersatzteile, die im Rahmen der
Gewährleistungsbestimmungen ausgeführt oder
getauscht wurden.
Diese Gewährleistungserklärung ersetzt alle
anderen Erklärungen, die in dieser oder anderen
oder vorherigen Ausgaben für dieses Gerät
enthalten bzw. vorhanden sind.
HX900 | HX1500 | HX2000 | HX4000

Welcome to the NOVA family.
Thank you for choosing a NOVA product.
► Professional audio quality and robust processing
The HX Series models are affordable, reliable and quality power amplifiers. The amplifiers suit for musicians, DJs, and entertainers as well as houses of
worship, cinemas, clubs and pubs. The four models are HX900, HX1500, HX2000 and HX4000. Features include XLR inputs, user selectable input sensitivity
of 0.755V or 1.4V, Speakon and binding post outputs, stereo / parallel / bridge-mono modes, LED indicators and forced-air cooling. All models include
protection against shorts, no-load, on/off thumps and radio-frequency interference.
Features
► Stereo / parallel / bridge-mono mode
► User selectable input sensitivity -0.775V and 1.4V
► Electronically balanced inputs
► Binding post and Speakon outputs
► Efficient forced-air cooling
► Two level controls, power switch, LED info display
► Extensive package of safety circuits for safe operation
We hope you will enjoy your HX power amplifier.
Willkommen in der NOVA Familie.
Vielen Dank für den Kauf eines NOVA Produktes.
► Stereo / Parallel / Bridge-Mono Modi
Ausstattungsmerkmale
Die HX Serie von NOVA steht für erschwingliche, zuverlässige und qualitativ hochwertige Leistungsverstärkung. Alle vier Modelle sind gemacht für Musiker,
DJs und Entertainer sowie für Kinos, Discotheken und Pubs. Die Serie umfasst die vier Modelle HX900, HX1500, HX2000 und HX4000. Zu den Merk-malen
gehören XLR Eingänge, wählbare Eingangsempfindlich-keit (0.755 V oder 1.4 V), Speakon- und Klemmanschluss-Ausgänge, Stereo / Parallel / Bridge-
Mono-Modus und Statusanzeigen an der Frontseite. Alle Modelle beinhalten ein umfangreiches Paket an Schutzschaltungen für einen sicheren Betrieb.
► Zwei Level-Regler, Netzschalter, LED Info-Display
► Effizientes Kühlungssystem
► Professionelle Audioqualität und robuste Verarbeitung
► Elektronisch symmetrierte Eingänge
► Ausgänge mit Klemmanschlüssen & Speakonbuchsen
► Wählbare Eingangsempfindlichkeit (-0.775V und 1.4V)
► Umfangsreiches Paket an Schutzschaltungen
Wir wünschen Ihnen mit dem HX Leistungsverstärker viel Freude.
4
5
HX900 | HX1500 | HX2000 | HX4000
Contents
Inhaltsverzeichnis
1. Front panel and controles
A. Gain controls
B. LED display
C. Power switch (AC)
2. Rear panel, inputs, outputs and settings
D. Signal input / link section
E. Mode / Sensitivity settings
F. Powered output terminals
©
G. Speakon output connectors
H. RESET circuit breaker
3. Technical Data
1. Frontansicht und Bedienelemente
A. Verstärkungsregler
B. LED-Anzeigen
C. Netzschalter
2. Rückansicht, Ein- / Ausgänge und Einstellungen
D. Signaleingänge / Link-Ausgänge
E. Einstellung von Betriebsmodus / Eingangsempfindlichkeit
F. Klemmanschlüsse am Leistungsausgang
©
G. Speakon Lautsprecheranschlüsse
H. Automatische Sicherheitsabschaltung
3. Technische Daten
6
6
6
6
7
7
7
7
8
8
9
|
Page Seite

Welcome to the NOVA family.
Thank you for choosing a NOVA product.
► Professional audio quality and robust processing
The HX Series models are affordable, reliable and quality power amplifiers. The amplifiers suit for musicians, DJs, and entertainers as well as houses of
worship, cinemas, clubs and pubs. The four models are HX900, HX1500, HX2000 and HX4000. Features include XLR inputs, user selectable input sensitivity
of 0.755V or 1.4V, Speakon and binding post outputs, stereo / parallel / bridge-mono modes, LED indicators and forced-air cooling. All models include
protection against shorts, no-load, on/off thumps and radio-frequency interference.
Features
► Stereo / parallel / bridge-mono mode
► User selectable input sensitivity -0.775V and 1.4V
► Electronically balanced inputs
► Binding post and Speakon outputs
► Efficient forced-air cooling
► Two level controls, power switch, LED info display
► Extensive package of safety circuits for safe operation
We hope you will enjoy your HX power amplifier.
Willkommen in der NOVA Familie.
Vielen Dank für den Kauf eines NOVA Produktes.
► Stereo / Parallel / Bridge-Mono Modi
Ausstattungsmerkmale
Die HX Serie von NOVA steht für erschwingliche, zuverlässige und qualitativ hochwertige Leistungsverstärkung. Alle vier Modelle sind gemacht für Musiker,
DJs und Entertainer sowie für Kinos, Discotheken und Pubs. Die Serie umfasst die vier Modelle HX900, HX1500, HX2000 und HX4000. Zu den Merk-malen
gehören XLR Eingänge, wählbare Eingangsempfindlich-keit (0.755 V oder 1.4 V), Speakon- und Klemmanschluss-Ausgänge, Stereo / Parallel / Bridge-
Mono-Modus und Statusanzeigen an der Frontseite. Alle Modelle beinhalten ein umfangreiches Paket an Schutzschaltungen für einen sicheren Betrieb.
► Zwei Level-Regler, Netzschalter, LED Info-Display
► Effizientes Kühlungssystem
► Professionelle Audioqualität und robuste Verarbeitung
► Elektronisch symmetrierte Eingänge
► Ausgänge mit Klemmanschlüssen & Speakonbuchsen
► Wählbare Eingangsempfindlichkeit (-0.775V und 1.4V)
► Umfangsreiches Paket an Schutzschaltungen
Wir wünschen Ihnen mit dem HX Leistungsverstärker viel Freude.
4
5
HX900 | HX1500 | HX2000 | HX4000
Contents
Inhaltsverzeichnis
1. Front panel and controles
A. Gain controls
B. LED display
C. Power switch (AC)
2. Rear panel, inputs, outputs and settings
D. Signal input / link section
E. Mode / Sensitivity settings
F. Powered output terminals
©
G. Speakon output connectors
H. RESET circuit breaker
3. Technical Data
1. Frontansicht und Bedienelemente
A. Verstärkungsregler
B. LED-Anzeigen
C. Netzschalter
2. Rückansicht, Ein- / Ausgänge und Einstellungen
D. Signaleingänge / Link-Ausgänge
E. Einstellung von Betriebsmodus / Eingangsempfindlichkeit
F. Klemmanschlüsse am Leistungsausgang
©
G. Speakon Lautsprecheranschlüsse
H. Automatische Sicherheitsabschaltung
3. Technische Daten
6
6
6
6
7
7
7
7
8
8
9
|
Page Seite

1.Front panel and controls
Frontansicht und Bedienelemente
HX900 | HX1500 | HX2000 | HX4000
6
7
A. Gain controls
Verstärkungsregler
Each channel is equipped with a 21-step gain
controller. Gain reduction may be used as
desired to reduce input noise, but will reduce
the headroom.
Jeder Kanal ist mit einem 21-stufigen
Verstärkungsregler ausgestattet. Eine
Reduzierung bewirkt ein geringeres
Grundrauschen, verringert jedoch auch den
Headroom.
B. LED display
LED-Anzeigen
protective behavior.
SIG (Signal)
PRT (Protect)
This LED shines red while amp is muted for any
reason. The LED shines bright red for 3
seconds (relay controlled inrush limiting) each
time the power is switched on. Muting in
other times indicates overheating or
LMT (Limiter)
This LED shines / flashes yellow during limiting
(built-in signal limiter).
This LED shines / flashes green, if signal is
detected at the inputs.
PW (Power)
This LED shines green, if the device is switched
on and confirms operation-ready status.
LMT (Limiter)
Diese LED leuchtet rot, wenn der Verstärker
aus irgendeinem Grund stummgeschaltet ist.
Die LED leuchtet hellrot für ca. 3 Sekunden
nach dem Einschalten des Gerätes (relais-
gesteuerte Einschaltstrombegrenzung). Ein
Stummschalten zu einem anderen Zeitpunkt
verweist auf ein Überhitzen des Geräts oder
das Ansprechen einer oder mehrerer
Schutzschaltungen.
PRT (Protect)
Diese LED leuchtet / flackert gelb, wenn der
eingebaute Signal-Limiter anspricht.
SIG (Signal)
Diese LED leuchtet / flackert grün, wenn Signal
am Eingang des Gerätes anliegt.
PW (Power)
Diese LED leuchtet dauerhaft grün, wenn das
Gerät eingeschaltet ist und zeigt die
Betriebsbereitschaft an.
A
B
C
A
C. Power Switch (AC)
Netzschalter
Power switch to switch on or off the device.
des Gerätes.
Netzschalter zum Ein- und Ausschalten
2.Rear panel, inputs, outputs and settings
Rückansicht, Ein- / Ausgänge und Einstellungen
D. Signal input / link section
Signaleingänge / Link-Ausgänge
Precision balanced inputs, female and male
XLR (NEUTRIK). The input signal are all wired
in parallel to LINK (for each channel).
Symmetrische Präzisionseingänge (NEUTRIK
XLR-Stecker und Buchsen). Die Eingangs-
signale sind pro Kanal parallel mit den LINK
Anschlüssen verdrahtet.
E
Balanced:
Unbalanced:
D
F
D
E. Mode / Sensitivity settings
Einstellung von Betriebsmodus / Eingangsempfindlichkeit
This switch changes the ratio between input
and output. It can be adjusted to 0.775V or
MODE (Input mode switches)
between the two „positive“ speaker terminals.
• BRIDGE Mode:
Sends CH1 signals out-of-phase to CH2,
Only CH1 controls and input are effective.
Each channel operates independently.
• PARALLEL Mode:
connected together. All controls and speaker
The inputs of both channels are directly
connections work as usual and independent
• STEREO Mode:
from each other.
SENSITIVITY (Mode switches)
producing twice the normal voltage swing
1.4V sensitivity.
voneinander.
MODE (Eingangsmodusschalter)
• BRDIGE Modus:
„positiven“ Lautsprecheranschlüssen.
Es sind nur die Bedienelemente
von CH1 aktiv.
Die Eingänge beider Kanäle sind direkt
• PARALLEL Modus:
miteinander verbunden. Alle Bedienelemente
• STEREO Modus:
und Lautsprecherverbindungen arbeiten
Jeder Kanal arbeit wie üblich unabhängig
jedoch wie üblich unabhängig voneinander.
Sendet CH1-Signale 180° phasenverschoben
Spannungshub zwischen den beiden
an CH2. Dies ergibt den doppelten
SENSITIVITY (Eingangsempfindlichkeit)
Mittels dieses Schalters kann das Verhältnis
zwischen Eingang und Ausgang eingestellt
werden (0.775V bzw. 1.4V).
MODE
BRIDGE
PARALLEL STEREO
SENSITIVITY
1.4V
0.775V
D. Powered output terminals
Klemmanschlüsse am Leistungsausgang
WARNING: Use safe wiring practice as peak
output voltages can be hazardous.
ACHTUNG: Den potenziell gefährlichen
Ausgangsspannungen durch sichere
Verdrahtungspraktiken Rechnung tragen.
CH2 CH1
MIN. MAX.

1.Front panel and controls
Frontansicht und Bedienelemente
HX900 | HX1500 | HX2000 | HX4000
6
7
A. Gain controls
Verstärkungsregler
Each channel is equipped with a 21-step gain
controller. Gain reduction may be used as
desired to reduce input noise, but will reduce
the headroom.
Jeder Kanal ist mit einem 21-stufigen
Verstärkungsregler ausgestattet. Eine
Reduzierung bewirkt ein geringeres
Grundrauschen, verringert jedoch auch den
Headroom.
B. LED display
LED-Anzeigen
protective behavior.
SIG (Signal)
PRT (Protect)
This LED shines red while amp is muted for any
reason. The LED shines bright red for 3
seconds (relay controlled inrush limiting) each
time the power is switched on. Muting in
other times indicates overheating or
LMT (Limiter)
This LED shines / flashes yellow during limiting
(built-in signal limiter).
This LED shines / flashes green, if signal is
detected at the inputs.
PW (Power)
This LED shines green, if the device is switched
on and confirms operation-ready status.
LMT (Limiter)
Diese LED leuchtet rot, wenn der Verstärker
aus irgendeinem Grund stummgeschaltet ist.
Die LED leuchtet hellrot für ca. 3 Sekunden
nach dem Einschalten des Gerätes (relais-
gesteuerte Einschaltstrombegrenzung). Ein
Stummschalten zu einem anderen Zeitpunkt
verweist auf ein Überhitzen des Geräts oder
das Ansprechen einer oder mehrerer
Schutzschaltungen.
PRT (Protect)
Diese LED leuchtet / flackert gelb, wenn der
eingebaute Signal-Limiter anspricht.
SIG (Signal)
Diese LED leuchtet / flackert grün, wenn Signal
am Eingang des Gerätes anliegt.
PW (Power)
Diese LED leuchtet dauerhaft grün, wenn das
Gerät eingeschaltet ist und zeigt die
Betriebsbereitschaft an.
A
B
C
A
C. Power Switch (AC)
Netzschalter
Power switch to switch on or off the device.
des Gerätes.
Netzschalter zum Ein- und Ausschalten
2.Rear panel, inputs, outputs and settings
Rückansicht, Ein- / Ausgänge und Einstellungen
D. Signal input / link section
Signaleingänge / Link-Ausgänge
Precision balanced inputs, female and male
XLR (NEUTRIK). The input signal are all wired
in parallel to LINK (for each channel).
Symmetrische Präzisionseingänge (NEUTRIK
XLR-Stecker und Buchsen). Die Eingangs-
signale sind pro Kanal parallel mit den LINK
Anschlüssen verdrahtet.
E
Balanced:
Unbalanced:
D
F
D
E. Mode / Sensitivity settings
Einstellung von Betriebsmodus / Eingangsempfindlichkeit
This switch changes the ratio between input
and output. It can be adjusted to 0.775V or
MODE (Input mode switches)
between the two „positive“ speaker terminals.
• BRIDGE Mode:
Sends CH1 signals out-of-phase to CH2,
Only CH1 controls and input are effective.
Each channel operates independently.
• PARALLEL Mode:
connected together. All controls and speaker
The inputs of both channels are directly
connections work as usual and independent
• STEREO Mode:
from each other.
SENSITIVITY (Mode switches)
producing twice the normal voltage swing
1.4V sensitivity.
voneinander.
MODE (Eingangsmodusschalter)
• BRDIGE Modus:
„positiven“ Lautsprecheranschlüssen.
Es sind nur die Bedienelemente
von CH1 aktiv.
Die Eingänge beider Kanäle sind direkt
• PARALLEL Modus:
miteinander verbunden. Alle Bedienelemente
• STEREO Modus:
und Lautsprecherverbindungen arbeiten
Jeder Kanal arbeit wie üblich unabhängig
jedoch wie üblich unabhängig voneinander.
Sendet CH1-Signale 180° phasenverschoben
Spannungshub zwischen den beiden
an CH2. Dies ergibt den doppelten
SENSITIVITY (Eingangsempfindlichkeit)
Mittels dieses Schalters kann das Verhältnis
zwischen Eingang und Ausgang eingestellt
werden (0.775V bzw. 1.4V).
MODE
BRIDGE
PARALLEL STEREO
SENSITIVITY
1.4V
0.775V
D. Powered output terminals
Klemmanschlüsse am Leistungsausgang
WARNING: Use safe wiring practice as peak
output voltages can be hazardous.
ACHTUNG: Den potenziell gefährlichen
Ausgangsspannungen durch sichere
Verdrahtungspraktiken Rechnung tragen.
CH2 CH1
MIN. MAX.

2.Rear panel, inputs, outputs and settings
Rückansicht, Ein- / Ausgänge und Einstellungen
©
G. Speakon output connectors
©
Speakon Lautsprecheranschlüsse
CH1 provides „2-wire“ access at pins 1+/1-
of CH1 at pins 1+/2+.
• BRIDGE MODE:
• STEREO / PARALLEL MODE:
CH2 provides „2-wire“ access at pins 1+/1-
Bridged output is provided at output connector
Buchse CH1 zur Verfügung (Pins 1+/2+).
Verwendung der Pins 1+/1-.
CH1 bietet „Zweileiter“-Zugriff unter
Verwendung der Pins 1+/1-.
CH2 bietet „Zweileiter“-Zugriff unter
• BRIDGE MODE:
Ausgang im Brückenbetrieb steht an der
• STEREO / PARALLEL MODE:
G
H
HX900 | HX1500 | HX2000 | HX4000
8
9
H. RESET circuit breaker
Automatische Sicherheitsabschaltung
If the power amplifier is overloaded (caused by
too low impedance at powered outputs or
continious input signal), the RESET button of
the circuit breaker will upspring immediately
and will power off the device automatically to
protect the amplifier. Once the unit has cooled
down or the reason for error is disconnected
from the unit, the safety switch can be pressed
to set back to normal operation.
Wenn der Verstärker überlastet wird (durch zu
geringe Impedanz an den Ausgängen oder bei
dauerhaft zu hohem Eingangssignal), wird der
Sicherheitsschalter ausgelöst. Dieser schaltet
das Gerät automatisch ab, um den Verstärker
zu schützen. Sobald das Gerät abgekühlt ist
bzw. die Fehlerquelle vom Gerät getrennt wird,
kann dieser Sicherheitsschalter gedrückt
werden, um den normalen Betrieb wieder
zu ermöglichen.
RESET
3.Technical Data
Technische Daten
Rated Power 1 kHz with 0.5% THD
at 4 ohms stereo:
at 8 ohms stereo:
at 8 ohms mono:
Frequency response at 1 Watt:
Total harmonic distortion (THD):
Intermod. dist. 60 Hz & 7 kHz at 4:1 (full to -30 dB):
Slew rate:
Voltage gain:
Damping factor (8 ohms) 10 Hz - 400 Hz:
S/N ratio (< rat. power, 20 Hz to 20 kHz, A-weighted):
Crosstalk (bel. rat. power) at 1 kHz:
Crosstalk (bel. rat. power) at 20 kHz:
Input sensitivity for full rat. power at 8 ohms:
Input impedance (nom.) balanced:
Input impedance (nom.) unbalanced:
Protection:
Ventilation:
Cooling:
Dimensions unit (mm) W x H x D:
Weight (net):
2 x 450 W
2 x 350 W
900 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
31 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 227 mm
12.7 kg
2 x 750 W
2 x 500 W
1.500 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
33 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 227 mm
13.5 kg
2 x 1.000 W
2 x 700 W
2.000 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
34 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 227 mm
14.5 kg
2 x 2.000 W
2 x 1.400 W
4.000 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
37 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 294 mm
20.6 kg
HX 900 HX 1500 HX 2000 HX 4000
Protection against short circuits, no-load, on/off muting, RF interference
Flow-through ventilation from front to back
Internal heat sinks with forced air. Fan cooled, speed regulated, thermal protection
HX AMPLIFIER
TOP VIEW
AIR FLOW
FRONT

2.Rear panel, inputs, outputs and settings
Rückansicht, Ein- / Ausgänge und Einstellungen
©
G. Speakon output connectors
©
Speakon Lautsprecheranschlüsse
CH1 provides „2-wire“ access at pins 1+/1-
of CH1 at pins 1+/2+.
• BRIDGE MODE:
• STEREO / PARALLEL MODE:
CH2 provides „2-wire“ access at pins 1+/1-
Bridged output is provided at output connector
Buchse CH1 zur Verfügung (Pins 1+/2+).
Verwendung der Pins 1+/1-.
CH1 bietet „Zweileiter“-Zugriff unter
Verwendung der Pins 1+/1-.
CH2 bietet „Zweileiter“-Zugriff unter
• BRIDGE MODE:
Ausgang im Brückenbetrieb steht an der
• STEREO / PARALLEL MODE:
G
H
HX900 | HX1500 | HX2000 | HX4000
8
9
H. RESET circuit breaker
Automatische Sicherheitsabschaltung
If the power amplifier is overloaded (caused by
too low impedance at powered outputs or
continious input signal), the RESET button of
the circuit breaker will upspring immediately
and will power off the device automatically to
protect the amplifier. Once the unit has cooled
down or the reason for error is disconnected
from the unit, the safety switch can be pressed
to set back to normal operation.
Wenn der Verstärker überlastet wird (durch zu
geringe Impedanz an den Ausgängen oder bei
dauerhaft zu hohem Eingangssignal), wird der
Sicherheitsschalter ausgelöst. Dieser schaltet
das Gerät automatisch ab, um den Verstärker
zu schützen. Sobald das Gerät abgekühlt ist
bzw. die Fehlerquelle vom Gerät getrennt wird,
kann dieser Sicherheitsschalter gedrückt
werden, um den normalen Betrieb wieder
zu ermöglichen.
RESET
3.Technical Data
Technische Daten
Rated Power 1 kHz with 0.5% THD
at 4 ohms stereo:
at 8 ohms stereo:
at 8 ohms mono:
Frequency response at 1 Watt:
Total harmonic distortion (THD):
Intermod. dist. 60 Hz & 7 kHz at 4:1 (full to -30 dB):
Slew rate:
Voltage gain:
Damping factor (8 ohms) 10 Hz - 400 Hz:
S/N ratio (< rat. power, 20 Hz to 20 kHz, A-weighted):
Crosstalk (bel. rat. power) at 1 kHz:
Crosstalk (bel. rat. power) at 20 kHz:
Input sensitivity for full rat. power at 8 ohms:
Input impedance (nom.) balanced:
Input impedance (nom.) unbalanced:
Protection:
Ventilation:
Cooling:
Dimensions unit (mm) W x H x D:
Weight (net):
2 x 450 W
2 x 350 W
900 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
31 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 227 mm
12.7 kg
2 x 750 W
2 x 500 W
1.500 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
33 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 227 mm
13.5 kg
2 x 1.000 W
2 x 700 W
2.000 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
34 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 227 mm
14.5 kg
2 x 2.000 W
2 x 1.400 W
4.000 W
20 Hz - 20 kHz, +0/-1 dB
<0.5%, 20 Hz - 20 kHz
=/< 0.35%
>10V/us
37 dB
>200
>100 dB
-75 dB
-58 dB
0.775 V / 1.4 V
20 k ohms
10 k ohms
482 x 88 x 294 mm
20.6 kg
HX 900 HX 1500 HX 2000 HX 4000
Protection against short circuits, no-load, on/off muting, RF interference
Flow-through ventilation from front to back
Internal heat sinks with forced air. Fan cooled, speed regulated, thermal protection
HX AMPLIFIER
TOP VIEW
AIR FLOW
FRONT

Kundendienst-Auftrag
Order for Customer Service
Kundendaten // Customer Data
Gerätedaten // Product Data
Genaue Fehlerbeschreibung // Detailed Problem Description
Verbindliche Reparaturfreigabe // Binding Repair Order
Kundennummer // Customer Account Number
Modell, Type // Model, Type
Name bzw. Firmenname // Name or Company Name
PLZ, Ort // ZIP, City Ihr Zeichen (RMA-Nr. o.Ä.) // Your internal Code
Seriennummer // Serial Number
Mitgeliefertes Zubehör (Netzkabel, Schutzhülle, etc.) // Supplied Accessories (Power Cable, Protective Cover, etc.)
Kontaktperson // Contact Person
Strasse, Hausnummer // Street, Number
Land // Country
Rechnungsnummer, falls vorhanden // Invoice Number, if available
MwSt. ID-Nr. (VAT) nur für EU-Ausland // VAT Number for EEC only
Kaufdatum // Date of Purchase
Email-Adresse // Email Address
Telefonnummer // Phone Number
Tritt der Fehler regelmäßig bzw. dauerhaft auf oder nur sporadisch? // Occurs the problem regularly (permanently) or sporadically?
Sporadisch, und zwar in folgender Situation
Sporadically, in the following situation
Regelmäßig bzw. dauerhaft // Regularly (permanently)
Sofern sich das Gerät innerhalb der Gewährleistungsfrist bendet und ein
Produktions- oder Materialfehler nachweisbar ist, erfolgt die Reparatur kostenfrei.
Bei innerdeutschen Reparaturen, die innerhalb der Gewährleistung kostenfrei
durchgeführt werden, erfolgt der Rückversand kulant kostenfrei. Bei
Garantiereparaturen mit Versand außerhalb von Deutschland wird der Rückversand
in Rechnung gestellt.
Hiermit beauftrage ich die CRAAFT AUDIO GmbH, Gewerbering 42, 94060
Pocking / Germany verbindlich, die Reparatur des hier aufgeführten Gerätes bis
zu einer Höhe von maximal 200,- (netto, Arbeitszeit und Material, zuzüglich
19% MwSt. und Rückversandkosten) kostenpichtig durchzuführen, sofern keine
Gewährleistung zur Anwendung kommt. Die tatsächlich entstehenden
Reparaturkosten werden durch den durchführenden Techniker festgelegt.
If the device is within the warranty period and a production or material fault is
detected, repair is free of charge. The return shipment will be charged for all
repairs.
I hereby authorize CRAAFT AUDIO GmbH, Gewerbering 42, 94060 Pocking /
Germany to repair of the equipment listed up to an amount of maximum 200, -
(net, time, materials and return shipping costs) in case of chargeable repairs.
The actually incurred repair costs will be decided by the responsible technician.
If the repair costs exceed the amount of 200, - , we will get in touch with you.
Firmenstempel, falls verfügbar // Company stamp, if availableDatum und Unterschrift zur verbindlichen Freigabe // Date and sign for binding repair order
HX900 | HX1500 | HX2000 | HX4000
10 11
Kundendienst-Auftrag
Order for Customer Service
CRAAFT AUDIO GmbH
Service Department
Gewerbering 42
94060 Pocking
Germany
Rücksendung eines defekten Produktes
Sie haben ein defektes Produkt, welches Sie an uns zurücksenden
möchten?
1. Kundendienst-Auftrag
Auf der folgenden Seite dieses PDF Files nden Sie das Auftragsformular
für den NOVA Kundendienst. Füllen Sie diesen Auftrag bitte
VOLLSTÄNDIG aus und unterschreiben
3. Versand
Schicken Sie jede Sendung FREI HAUS an uns. Sendungen, die uns
UNFREI erreichen, werden nicht angenommen. Achten Sie beim
Versand auf eine ausreichend hohe Transportversicherung. Eine
vorherige schriftliche oder telefonische Ankündigung Ihrer Sendung bzw.
eine Anforderung einer RMA-Nummer ist nicht erforderlich.
2. Verpackung
Verpacken Sie das defekte Produkt in der Originalverpackung. Falls diese
nicht mehr vorhanden ist, nutzen Sie eine eigene Verpackung. Diese
sollte ausreichend robust sein und mit ausreichend Füllmaterial von allen
Seiten ausgestattet sein. Wir übernehmen keine Haftung für Schäden am
Produkt jeglicher Art, die während des Transports zu
Kostenfreie Reparatur
uns entstehen. Schicken Sie das Produkt möglichst ohne Zubehör und
Kabel.
Im Falle einer kostenfreien Reparatur führen wir diese schnellstmöglich
durch.
Sobald Ihr defektes Produkt bei uns eingetroffen ist, prüfen wir zunächst
Ihre Fehlerbeschreibung und stellen fest, ob Gewährleistung zur
Anwendung kommt oder eine kostenpichtige Reparatur erforderlich ist.
Sie diesen, sofern Sie mit den unten im Auftrag aufgeführten
Kundendienstbedingungen einverstanden sind. Sie sind verpichtet, die
Kundendienstbedingungen genau zu lesen, bevor Sie diese mit Ihrer
Unterschrift bestätigen. Drucken Sie dann den vollständig ausgefüllten
Kundendienstauftrag aus und bringen ihn zusammen mit dieser Seite
außen am Paket erkennbar an (Versandtasche oder Umschlag).
4. Reparatur
4. Repair
On the following page of this PDF le you will nd the order form for the
NOVA customer service. Fill in this order form COMPLETELY and sign, if
you agree with the conditions listed in the form. Please read the
customer service conditions carefully before you conrm with your
signature. Then print out the completed customer service order
Free Warranty Service
2. Packaging
1. Order for Customer Service
Pack the defective product into the original packaging. If this no longer
exists, use your own packaging. This should be robust and include
sufcient packing material on all sides. We accept no liability for damage
to the product during transport. Send the product without accessories
and cables.
Send each consignment at FREE DELIVERY to us. Shipments that reach
us NOT FREE, will not be accepted. When shipping, ensure to a
sufciently high transport insurance. A written or telephone notice of
your shipment to us or requesting an RMA number is not required.
Returning a defective product
You have a defective product that you want to return to us?
and stick it along with this page outside onto the package (mailer or
envelope).
3. Shipping
Once your defective product is delivered to us, we rst check your
problem description and determine if warranty is applicable or a fee-
based service is required.
In case of a free repair we handle it as quickly as possible.
Fee-based Service
Sign the customer service form to conrm the service charge up to a
maximum of
Senden Sie die Lieferung ausschließlich an folgende Adresse:
Send the shipment to the following address only:
CRAAFT AUDIO GmbH // Gewerbering 42 // 94060 Pocking // Germany
Phone: +49 (0) 8531 3171-0 // Sales Administration Fax: +49 (0) 8531 3171-25 // Sales Administration Email: [email protected] // www.novacoustic.com
Headquarter (Sitz): Pocking // Jurisdiction (Gerichtsstand): Passau // Register Court (Registergericht): Passau HRB 6531 // EEC VAT Number (USt-Id Nummer): DE 814063025 // Managing Director (Geschäftsführer): Mr. Heinz Jürgen Schwarzmüller
Tax Identification Code (Steuernummer): 153/123/80193 (FA Passau) // WEEE Registration Number (WEEE Registrierungsnummer): DE 48092788
Bank Name: Sparkasse Niederbayern-Mitte // Street (Straße): Hauptstraße 2 // ZIP (PLZ): 94405 // City (Ort): Landau an der Isar // Germany // IBAN: DE96 7425 0000 0100 5296 27 // BIC: BYLADEM1SRG
Bank Name: Sparkasse Passau // Street (Straße): Nikolastr. 1 // ZIP (PLZ): 94032 // City (Ort): Passau // Germany // IBAN: DE16 7405 0000 0008 9658 73 // BIC: BYLADEM1PAS

Kundendienst-Auftrag
Order for Customer Service
Kundendaten // Customer Data
Gerätedaten // Product Data
Genaue Fehlerbeschreibung // Detailed Problem Description
Verbindliche Reparaturfreigabe // Binding Repair Order
Kundennummer // Customer Account Number
Modell, Type // Model, Type
Name bzw. Firmenname // Name or Company Name
PLZ, Ort // ZIP, City Ihr Zeichen (RMA-Nr. o.Ä.) // Your internal Code
Seriennummer // Serial Number
Mitgeliefertes Zubehör (Netzkabel, Schutzhülle, etc.) // Supplied Accessories (Power Cable, Protective Cover, etc.)
Kontaktperson // Contact Person
Strasse, Hausnummer // Street, Number
Land // Country
Rechnungsnummer, falls vorhanden // Invoice Number, if available
MwSt. ID-Nr. (VAT) nur für EU-Ausland // VAT Number for EEC only
Kaufdatum // Date of Purchase
Email-Adresse // Email Address
Telefonnummer // Phone Number
Tritt der Fehler regelmäßig bzw. dauerhaft auf oder nur sporadisch? // Occurs the problem regularly (permanently) or sporadically?
Sporadisch, und zwar in folgender Situation
Sporadically, in the following situation
Regelmäßig bzw. dauerhaft // Regularly (permanently)
Sofern sich das Gerät innerhalb der Gewährleistungsfrist bendet und ein
Produktions- oder Materialfehler nachweisbar ist, erfolgt die Reparatur kostenfrei.
Bei innerdeutschen Reparaturen, die innerhalb der Gewährleistung kostenfrei
durchgeführt werden, erfolgt der Rückversand kulant kostenfrei. Bei
Garantiereparaturen mit Versand außerhalb von Deutschland wird der Rückversand
in Rechnung gestellt.
Hiermit beauftrage ich die CRAAFT AUDIO GmbH, Gewerbering 42, 94060
Pocking / Germany verbindlich, die Reparatur des hier aufgeführten Gerätes bis
zu einer Höhe von maximal 200,- (netto, Arbeitszeit und Material, zuzüglich
19% MwSt. und Rückversandkosten) kostenpichtig durchzuführen, sofern keine
Gewährleistung zur Anwendung kommt. Die tatsächlich entstehenden
Reparaturkosten werden durch den durchführenden Techniker festgelegt.
If the device is within the warranty period and a production or material fault is
detected, repair is free of charge. The return shipment will be charged for all
repairs.
I hereby authorize CRAAFT AUDIO GmbH, Gewerbering 42, 94060 Pocking /
Germany to repair of the equipment listed up to an amount of maximum 200, -
(net, time, materials and return shipping costs) in case of chargeable repairs.
The actually incurred repair costs will be decided by the responsible technician.
If the repair costs exceed the amount of 200, - , we will get in touch with you.
Firmenstempel, falls verfügbar // Company stamp, if availableDatum und Unterschrift zur verbindlichen Freigabe // Date and sign for binding repair order
HX900 | HX1500 | HX2000 | HX4000
10 11
Kundendienst-Auftrag
Order for Customer Service
CRAAFT AUDIO GmbH
Service Department
Gewerbering 42
94060 Pocking
Germany
Rücksendung eines defekten Produktes
Sie haben ein defektes Produkt, welches Sie an uns zurücksenden
möchten?
1. Kundendienst-Auftrag
Auf der folgenden Seite dieses PDF Files nden Sie das Auftragsformular
für den NOVA Kundendienst. Füllen Sie diesen Auftrag bitte
VOLLSTÄNDIG aus und unterschreiben
3. Versand
Schicken Sie jede Sendung FREI HAUS an uns. Sendungen, die uns
UNFREI erreichen, werden nicht angenommen. Achten Sie beim
Versand auf eine ausreichend hohe Transportversicherung. Eine
vorherige schriftliche oder telefonische Ankündigung Ihrer Sendung bzw.
eine Anforderung einer RMA-Nummer ist nicht erforderlich.
2. Verpackung
Verpacken Sie das defekte Produkt in der Originalverpackung. Falls diese
nicht mehr vorhanden ist, nutzen Sie eine eigene Verpackung. Diese
sollte ausreichend robust sein und mit ausreichend Füllmaterial von allen
Seiten ausgestattet sein. Wir übernehmen keine Haftung für Schäden am
Produkt jeglicher Art, die während des Transports zu
Kostenfreie Reparatur
uns entstehen. Schicken Sie das Produkt möglichst ohne Zubehör und
Kabel.
Im Falle einer kostenfreien Reparatur führen wir diese schnellstmöglich
durch.
Sobald Ihr defektes Produkt bei uns eingetroffen ist, prüfen wir zunächst
Ihre Fehlerbeschreibung und stellen fest, ob Gewährleistung zur
Anwendung kommt oder eine kostenpichtige Reparatur erforderlich ist.
Sie diesen, sofern Sie mit den unten im Auftrag aufgeführten
Kundendienstbedingungen einverstanden sind. Sie sind verpichtet, die
Kundendienstbedingungen genau zu lesen, bevor Sie diese mit Ihrer
Unterschrift bestätigen. Drucken Sie dann den vollständig ausgefüllten
Kundendienstauftrag aus und bringen ihn zusammen mit dieser Seite
außen am Paket erkennbar an (Versandtasche oder Umschlag).
4. Reparatur
4. Repair
On the following page of this PDF le you will nd the order form for the
NOVA customer service. Fill in this order form COMPLETELY and sign, if
you agree with the conditions listed in the form. Please read the
customer service conditions carefully before you conrm with your
signature. Then print out the completed customer service order
Free Warranty Service
2. Packaging
1. Order for Customer Service
Pack the defective product into the original packaging. If this no longer
exists, use your own packaging. This should be robust and include
sufcient packing material on all sides. We accept no liability for damage
to the product during transport. Send the product without accessories
and cables.
Send each consignment at FREE DELIVERY to us. Shipments that reach
us NOT FREE, will not be accepted. When shipping, ensure to a
sufciently high transport insurance. A written or telephone notice of
your shipment to us or requesting an RMA number is not required.
Returning a defective product
You have a defective product that you want to return to us?
and stick it along with this page outside onto the package (mailer or
envelope).
3. Shipping
Once your defective product is delivered to us, we rst check your
problem description and determine if warranty is applicable or a fee-
based service is required.
In case of a free repair we handle it as quickly as possible.
Fee-based Service
Sign the customer service form to conrm the service charge up to a
maximum of
Senden Sie die Lieferung ausschließlich an folgende Adresse:
Send the shipment to the following address only:
CRAAFT AUDIO GmbH // Gewerbering 42 // 94060 Pocking // Germany
Phone: +49 (0) 8531 3171-0 // Sales Administration Fax: +49 (0) 8531 3171-25 // Sales Administration Email: [email protected] // www.novacoustic.com
Headquarter (Sitz): Pocking // Jurisdiction (Gerichtsstand): Passau // Register Court (Registergericht): Passau HRB 6531 // EEC VAT Number (USt-Id Nummer): DE 814063025 // Managing Director (Geschäftsführer): Mr. Heinz Jürgen Schwarzmüller
Tax Identification Code (Steuernummer): 153/123/80193 (FA Passau) // WEEE Registration Number (WEEE Registrierungsnummer): DE 48092788
Bank Name: Sparkasse Niederbayern-Mitte // Street (Straße): Hauptstraße 2 // ZIP (PLZ): 94405 // City (Ort): Landau an der Isar // Germany // IBAN: DE96 7425 0000 0100 5296 27 // BIC: BYLADEM1SRG
Bank Name: Sparkasse Passau // Street (Straße): Nikolastr. 1 // ZIP (PLZ): 94032 // City (Ort): Passau // Germany // IBAN: DE16 7405 0000 0008 9658 73 // BIC: BYLADEM1PAS

a division of
Gewerbering 42 • 94060 Pocking / Germany • Phone: +49 (0) 85 31 - 31 71 - 0 • Fax: +49 (0) 85 31 - 31 71 - 25
Email: [email protected]
Limited liability on contents. Subjects to change without prior notice. All rights reserved © 2004-2018. Printed in Germany 2018.
We continually engage in research related to product improvement. Materials, production methods and design refinements are introduced into existing products.
Any current NOVA product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
This manual suits for next models
3
Table of contents
Other Nova Amplifier manuals