Nutri Ninja Pro Extractor Blades User manual

XSKBLDUK

1 2
Before using the Ninja®Pro Extractor Blades™read
the instruction manual of the appliance with which it
is being used.
READ ALL INSTRUCTIONS BEFORE USING YOUR
NINJA®PRO EXTRACTOR BLADES™.
IMPORTANT: This accessory is not intended for
use on the applicable appliances by persons with
reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children shall not use or play with this
accessory in use with the appliance. Children should
be supervised to ensure they do not play with the
accessory and the appliance.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. CAUTION: When handling the blade
assembly, do not hold the blades but
rather always hold by the base of the
blade assembly. Blades are sharp. Handle
carefully!
2. DO NOT allow young children to operate the
appliance or use as a toy. Close supervision
is necessary when any appliance is used near
children.
3. Avoid contact with moving parts.
4. DO NOT attempt to sharpen blades.
5. DO NOT use the appliance if the Pro Extractor
Blades™blades are bent or damaged.
6. To reduce the risk of injury, never attempt
to place the Pro Extractor Blades™onto the
motor base without first assembling the blade
assembly to the Nutri Ninja®cup.
7. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
8. Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
9. For further instructions please refer to the
appliance’s instruction manual for the model
numbers listed below.
SAVE THESE
INSTRUCTIONS
THIS ACCESSORY IS COMPATIBLE WITH
THE FOLLOWING MODELS:
BL450 series*
BL470 series
BL480 series*
BL490 series
BL642 series
BL682 series
* The Pro Extractor Blades are only compatible with
certain models of the BL480 and BL450. If your
Pro Extractor Blade do not work with your BL480
or BL450, please call 0800 862 0453 for more
information on how to proceed.
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only

3 4
Using the Pro Extractor Blades™
WARNING: NEVER LEAVE THE APPLIANCE UNATTENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN HANDLING THE BLADE ASSEMBLIES AS THE BLADES ARE VERY SHARP.
CAUTION: DO NOT BLEND HOT LIQUIDS.
Allow liquids and foods to cool to room temperature before blending.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
This accessory pack includes one set of Pro Extractor Blades™.
Motor base may vary depending on unit purchased.
IMPORTANT: MAKE SURE THAT THE MOTOR BASE IS
PLUGGED IN FOR USE. NO LIGHTS WILL TURN ON.
IMPORTANT: DO NOT OVERFILL! TO AVOID
SPILLING, DO NOT ADD INGREDIENTS PAST THE
“MAX” LINE.
1Remove all packaging material and labels from the
Pro Extractor Blades™.
2Wash the Pro Extractor Blades™in warm, soapy
water with a soft cloth.
CAUTION: Handle the blade assembly with care
when washing as the blades are very sharp.
3Rinse and dry thoroughly.
4The Pro Extractor Blades™are dishwasher safe. It
is recommended that the blade assembly be placed
on the top rack. Ensure that the blade assembly
is removed from the cup before placing in the
dishwasher.
IMPORTANT: Place the motor base of the main
unit on a clean, dry, level surface such as a
counter or table top.
5 Place the blade assembly onto the cup and twist it on
tightly, clockwise, until you have a good seal. (Fig. 1)
6Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor
base. Turn it clockwise, until it “clicks” into place.
(Fig. 2)
7Follow the operation instructions from the main
instruction manual of the base being used to start.
(Fig. 3)
8
To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
9Turn the cup upright and remove the blade assembly
by twisting the blade assembly anticlockwise . Be sure
to store the blade assembly attached to an empty cup
when not in use.
10 Twist the Sip & Seal®lid onto the cup to enjoy your
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks
open when pressed backward.
11 Make sure that the motor base is unplugged when
not in use.

5 6
Care & Maintenance
CLEANING:
CAUTION: MAKE SURE THAT THE MOTOR BASE
IS UNPLUGGED FROM THE POWER SOURCE
BEFORE INSERTING OR REMOVING ANY
ATTACHMENT AND BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR BASE
INTO WATER OR ANY OTHER LIQUID.
CAUTION: HANDLE THE BLADE ASSEMBLY
CAREFULLY AS THE BLADES ARE VERY SHARP!
1Separate/remove all parts from each other.
2Clean the motor base with a damp cloth and wipe dry.
3Place the Pro Extractor Blades™ in the top rack of the
dishwasher.
STORING:
1Store the Pro Extractor Blades™where they will not
be damaged and won’t cause a hazard.
Troubleshooting
Unit doesn’t turn on:
• Make sure the unit is plugged in.
• Insert and rotate cup clockwise in the base until it “clicks”.
Unit doesn’t turn off:
• Remove cup from base by rotating cup anticlockwise and
lifting out. Display should turn off. Unplug the power cord from
the outlet.
Lid/blade assembly hard to assemble:
• Do not overfill the cup with solid ingredients.
• Set the cup on a level surface. Place the Pro Extractor Blades
™
on the top of the cup and align the threads so that the blades
sit flat on the cup. Twist clockwise so that the Pro Extractor
Blades
™
evenly align to the cup until you have a tight seal.
Doesn’t mix well, food gets stuck:
• When loading the cup, start by adding fresh fruits and
vegetables, next add leafy greens and herbs. Pour in liquid or
Yoghurt next. For recipes with frozen ingredients or to make
your drink thinner and more juice-like, add liquid as desired.
Next Add any dry or sticky ingredients. Top off with ice or
frozen ingredients.
• For best results, pulse and pause allowing food to settle
toward the blades. If ingredients are routinely getting stuck,
add additional liquid or reduce the amount of hard or frozen
ingredients in the cup.
Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and
materials. This guarantee does not affect your statutory rights. If this product proves unsatisfactory please
contact our customer service department on freephone 0800 862 0453.

© 2015 EURO-PRO Operating LLC
XSKBLDUK_series_30_IB_E_150918_1
Euro-Pro Europe Limited
15 Mariner Court
Calder Park
Wakefield
WF4 3FL
Freephone 0800 862 0453
www.ninjakitchen.eu
PRINTED IN CHINA
Euro-Pro, Nutri Ninja, Sip & Seal and Ninja are registered
trademarks of Euro-Pro Operating LLC.
Pro Extractor Blades is a trademark of Euro-Pro Operating LLC.
Illustrations may differ from actual product.
We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.